Download Print this page

HP Workstation xw4100 Hardware Installation Manual page 6

Hp solenoid lock and hood sensor installation guide
Hide thumbs Also See for Workstation xw4100:

Advertisement

Disabling and removing the Solenoid Lock
There are two methods to disable the Solenoid Lock.
If you can access the F10 Setup utility, follow the steps in
F10 Setup Utility on page
If a Solenoid Lock is installed but you cannot access the F10 utility, follow the steps in
the Solenoid Lock mechanically on page
Disabling the Solenoid Lock via the F10 Setup Utility
1.
Turn on or restart the computer.
2.
Repeatedly press and release the
NOTE:
then on again, and press the
3.
Select Security > Smart Cover > Unlock.
4.
Before exiting, select File > Save Changes and Exit.
5.
Remove the computer side access panel to access the internal components of the computer.
6.
Using the FailSafe Key included in this kit, remove the two tamper-resistant screws that secure
the Solenoid Lock to the chassis.
7.
Unplug the Solenoid Lock cable from the system board and remove the lock assembly.
Disabling the Solenoid Lock mechanically
NOTE:
If the Solenoid Lock is locked and disabled mechanically, the new lock will be automatically
locked as soon as the computer is restarted.
1.
Exit all software applications, shut down the operating system software, turn off the computer
and any external devices, and then disconnect the power cord from the power outlet.
2.
Lay the computer on its side with the cover facing up.
3.
Using the FailSafe Key included in this kit, remove the two tamper-resistant screws that secure
the Solenoid Lock to the chassis.
4.
After the screws are removed, the Solenoid Lock will fall inside the chassis.
5.
Remove the computer side access panel to access the internal components of the computer.
6.
Unplug the Solenoid Lock cable from the system board and remove the lock assembly.
6
Installing an HP Solenoid Lock and Hood Sensor
6.
If you do not press the
F10
6.
F10
key until the Computer Setup Utilities menu appears.
F10
key at the appropriate time, you must turn the computer off,
key again to access Computer Setup.
Disabling the Solenoid Lock via the
Disabling
ENWW

Advertisement

loading