HP Xw4550 - Workstation - 2 GB RAM Installation Manual page 6

3. Attach any subsequent hard drives to ports 1–3 on the RAID controller card.
Figure 5
4. Continue with
Connecting standard data cables
Hard drives installed in HP
not have blind-mate cabling preinstalled on the system board. To connect the RAID cabling for these
configurations:
1. If connecting a SAS hard drive, ensure that there is a SAS-to-SATA interconnect cable adapter
(supplied with the HP workstation SAS hard drive kit) attached to the data connector on the SAS
hard drive.
Figure 6
6 LSI SAS 3041E Serial Attached SCSI RAID Host Bus Adapter installation
Connecting the blind-mate data cables to the RAID card
Connecting the LED activity indicator on page
400 Workstations, HP xw Workstation series, and all optical drive bays do
Attaching the SAS-SATA adapter
7.
ENWW