HP Xw6600 - Workstation - 2 GB RAM Installation Manual page 8

6. On the SFF hard drive carrier, attach one of the removed hard drive mounting rails to the carrier,
oriented as shown in the following two figures. To affix the mounting rail, engage the four mounting
rail pins with the matching holes in the carrier.
Figure 6
NOTE:
the loaded SFF hard drive number 1 SAS connector (see the following figure).
Figure 7
8 Small form factor bay converter and hard drive installation
Installing a mounting rail on the carrier (SFF hard drive number 1 shown loaded)
When correctly installed, the mounting rail locking/release tabs are located adjacent to
Mounting rail and carrier orientation
ENWW