Japanese 日本語 - HP xw8600 - Workstation Installation Manual

HP xw Workstations
To access the Computer Setup (F10) Utility menu:
1. Power up the workstation.
2. Press F10
corner of the screen.
NOTE:
then press
boot if you miss the opportunity to press F10.
3. Select your language from the list, and press the
4. Set the SATA/eSATA port speed for each port connect to the eSATA adapter. Omit the steps for
an eSATA port that is not connected to the eSATA adapter.
5. Use the arrow keys to scroll to Storage > Storage Option > SATA/eSATA Speed Port4 Setup.
6. Use the arrow keys to select GEN1/1.5Gbps (eSATA).
7. Use the arrow keys to scroll to Storage > Storage Option > SATA/eSATA Speed Port5 Setup.
8. Use the arrow keys to select GEN1/1.5Gbps (eSATA).
9. To apply and save changes, select File > Save Changes and Exit.
Japanese 日本語
This document is available in Japanese. See http://www.hp.com/support/workstation_manuals, then
select your workstation product and select Japanese from the drop down Manual Language menu.
このドキュメントは日本語版が用意されています。http://www.hp.com/support/workstation_manuals
にアクセスし、ご使用のワークステーション製品を選択し、Manual Language ドロップダウン メニ
ューから Japanese を選択してください。
6 HP eSATA PCI cable kit installation
as soon as your display is active and you see F10=Setup appear in the lower-right
If you do not press F10
F10 again to access the utility. You can also press the
at the appropriate time, turn the workstation off, turn it on, and
Enter
Ctrl + Alt + Delete
key.
keys before
ENWW