HP ProBook 6450b - Notebook PC User Manual
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Laptop
  5. ProBook 6450b
  6. User manual

HP ProBook 6450b - Notebook PC User Manual

Hp probook user guide - windows vista
Hide thumbs Also See for ProBook 6450b - Notebook PC:
Table of Contents

Advertisement

Quick Links

See also: Maintenance and Service Manual
HP ProBook User Guide

Advertisement

Table of Contents
loading

Related Manuals for HP ProBook 6450b - Notebook PC

Summary of Contents for HP ProBook 6450b - Notebook PC

  • Page 1 HP ProBook User Guide...
  • Page 2 This user guide describes features that are Bluetooth is a trademark owned by its common to most models. Some features proprietor and used by Hewlett-Packard may not be available on your computer. Company under license. Intel is a trademark of Intel Corporation in the U.S. and other countries or regions.
  • Page 3 Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
  • Page 4 Safety warning notice...

  • Page 5: Table Of Contents

    Table of contents 1 Features Identifying hardware ..........................1 Top components ........................1 TouchPad ......................1 Lights ........................3 Buttons and fingerprint reader (select models only) ..........6 Keys ........................10 Front components ......................11 Right-side components ...................... 12 Left-side components ......................14 Rear components ......................
  • Page 6 Current network security codes are unavailable ..............32 WLAN connection is very weak ..................33 Cannot connect to the wireless router ................33 Using the modem (select models only) ....................34 Connecting a modem cable ....................34 Connecting a country- or region-specific modem cable adapter ........35 Selecting a location setting ....................
  • Page 7 Troubleshooting ......................... 55 The optical disc tray does not open for removal of a CD, DVD, or BD ..... 56 The computer does not detect the optical drive ..........56 A disc does not play ..................57 A disc does not play automatically ..............57 A movie stops, skips, or plays erratically ............
  • Page 8 Step 3: Discharge the battery ................73 Step 4: Fully recharge the battery ..............74 Step 5: Reenable Hibernation and Sleep ............74 Conserving battery power ....................74 Storing a battery ........................ 74 Disposing of a used battery ....................75 Replacing the battery ......................
  • Page 9 9 Memory modules Adding or replacing a memory module in the expansion memory module slot ........ 106 Upgrading a memory module in the primary memory module slot ........... 109 10 Security Protecting the computer ........................113 Using passwords ..........................114 Setting passwords in Windows ..................
  • Page 10 Computer Setup menus ........................141 File menu ......................... 142 Security menu ........................142 System Configuration menu .................... 143 14 MultiBoot About the boot device order ......................147 Enabling boot devices in Computer Setup ..................149 Considering boot order changes ...................... 150 Choosing MultiBoot preferences ......................

  • Page 11: Features

    Features Identifying hardware Components included with the computer may vary by region and model. The illustrations in this chapter identify the standard features on most computer models. To see a list of hardware installed in the computer, follow these steps: Select Start >...
  • Page 12 Component Description Pointing stick (select models only)* Moves the pointer and selects or activates items on the screen. Left pointing stick button (select models only)* Functions like the left button on an external mouse. TouchPad* Moves the pointer and selects or activates items on the screen. Left TouchPad button* Functions like the left button on an external mouse.

  • Page 13: Lights

    Lights NOTE: Refer to the illustration that most closely matches your computer. Component Description ● Wireless lights (2)* Blue: An integrated wireless device (select models only), such as a wireless local area network (WLAN) device, the HP Mobile Broadband Module, and/or a Bluetooth® device, is on. ●...
  • Page 14 Component Description ● Drive light Blinking turquoise: The hard drive or optical drive (select models only) is being accessed. ● Amber: HP 3D DriveGuard has temporarily parked the hard drive. ● QuickLook light On: The computer is on or HP QuickLook is in use. ●...
  • Page 15 Component Description Wireless lights (2)* ● Blue: An integrated wireless device (select models only), such as a wireless local area network (WLAN) device, the HP Mobile Broadband Module, and/or a Bluetooth® device, is on. ● Amber: All wireless devices are off. ●...

  • Page 16: Buttons And Fingerprint Reader (Select Models Only)

    Component Description ● Drive light Blinking turquoise: The hard drive or optical drive (select models only) is being accessed. ● Amber: HP 3D DriveGuard has temporarily parked the hard drive. ● QuickLook light On: The computer is on or HP QuickLook is in use. ●...
  • Page 17 Component Description Power button ● When the computer is off, press the button to turn on the computer. ● When the computer is on, press the button to shut down the computer. ● When the computer is in the Sleep state, press the button briefly to exit Sleep.
  • Page 18 Component Description Wireless button Turns the wireless feature on or off but does not establish a wireless connection. Volume mute button Mutes and restores speaker sound. Volume down button Decreases computer volume. Volume up button Increases computer volume. Fingerprint reader (select models only) Allows a fingerprint logon to Windows, instead of a password logon.
  • Page 19 Component Description To learn more about your power settings, select Start > Control Panel > System and Maintenance > Power Options. QuickLook button ● When the computer is off, press the button to open HP QuickLook. ● When the computer is on, press the button to open Software Setup.

  • Page 20: Keys

    Keys NOTE: Refer to the illustration that most closely matches your computer. Component Description Displays system information when pressed in combination with the key. Executes frequently used system functions when pressed in combination with a function key or the key. Windows logo key Displays the Windows Start menu.

  • Page 21: Front Components

    Component Description Displays system information when pressed in combination with the key. Executes frequently used system functions when pressed in combination with a function key or the key. Windows logo key Displays the Windows Start menu. Windows applications key Displays a shortcut menu for items beneath the pointer. Integrated numeric keypad keys Can be used like the keys on an external numeric keypad.

  • Page 22: Right-Side Components

    Component Description ● Wireless light Blue: An integrated wireless device (select models only), such as a wireless local area network (WLAN) device, the HP Mobile Broadband Module, and/or a Bluetooth® device, is on. ● Amber: All wireless devices are off. ●...
  • Page 23 Component Description Media Card Reader Supports the following optional digital card formats: ● Memory Stick ● Memory Stick Pro ● Memory Stick Duo (adapter required) ● Memory Stick Duo Pro (adapter required) ● MultiMediaCard ● MultiMediaCard Plus ● Secure Digital (SD) Memory Card ●...

  • Page 24: Left-Side Components

    Component Description ● MultiMediaCard ● MultiMediaCard Plus ● Secure Digital (SD) Memory Card ● SD High Capacity Memory Card ● microSD Memory Card (adapter required) ● xD-Picture Card Upgrade bay Supports an optical drive or a hard drive. USB port Connects an optional USB device.

  • Page 25: Rear Components

    Component Description Audio-in (microphone) jack Connects an optional computer headset microphone, stereo array microphone, or monaural microphone. Audio-out (headphone) jack Produces sound when connected to optional powered stereo speakers, headphones, ear buds, a headset, or television audio. NOTE: When a device is connected to the headphone jack, the computer speakers are disabled.

  • Page 26: Bottom Components

    Bottom components Component Description SIM slot Contains a wireless subscriber identity module (SIM) (select models only). The SIM slot is located inside the battery bay. Battery release latch Releases the battery from the battery bay. Battery bay Holds the battery. Accessory battery connector Connects an optional accessory battery.

  • Page 27: Display Components

    Component Description NOTE: To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the computer by the governmental agency that regulates wireless devices in your country or region. If you replace the module and then receive a warning message, remove the module to restore computer functionality, and then contact technical support through Help and Support.

  • Page 28: Wireless Antennas (Select Models Only)

    Wireless antennas (select models only) NOTE: Your computer may look slightly different from the illustration in this section. Component Description WWAN antennas (2)* Send and receive wireless signals to communicate with wireless wide-area networks (WWAN). WLAN antennas (2)* Send and receive wireless signals to communicate with wireless local area networks (WLAN).

  • Page 29: Additional Hardware Components

    Additional hardware components Component Description Power cord* Connects an AC adapter to an AC outlet. AC adapter Converts AC power to DC power. Battery* Powers the computer when the computer is not plugged into external power. *Batteries and power cords vary in appearance by region and country. Identifying the labels The labels affixed to the computer provide information you may need when you troubleshoot system problems or travel internationally with the computer.
  • Page 30 Component Serial number Product number Warranty period Model description (select models only) Have this information available when you contact technical support. The serial number label is affixed to the bottom of the computer. ● Microsoft® Certificate of Authenticity—Contains the Windows Product Key. You may need the Product Key to update or troubleshoot the operating system.

  • Page 31: Wireless, Modem, And Local Area Network

    Wireless, modem, and local area network Using wireless devices (select models only) Wireless technology transfers data across radio waves instead of wires. Your computer may be equipped with one or more of the following wireless devices: ● Wireless local area network (WLAN) device—Connects the computer to wireless local area networks (commonly referred to as Wi-Fi networks, wireless LANs, or WLANs) in corporate offices, your home, and public places such as airports, restaurants, coffee shops, hotels, and universities.

  • Page 32: Identifying Wireless And Network Icons

    Identifying wireless and network icons Icon Name Description Wireless (connected) Identifies the location of the wireless lights and the wireless button on the computer. Also identifies the Wireless Assistant software on the computer and indicates that one or more of the wireless devices are on. Wireless Identifies the Wireless Assistant software on the computer and (disconnected)

  • Page 33: Using Wireless Assistant Software (Select Models Only)

    Using Wireless Assistant software (select models only) A wireless device can be turned on or off using the Wireless Assistant software. If a wireless device is disabled by Computer Setup, it must be reenabled by Computer Setup before it can be turned on or off using Wireless Assistant.

  • Page 34: Using A Wlan Device (Select Models Only)

    For more information, refer to Help and Support. Select Start > Help and Support. Using a WLAN device (select models only) With a WLAN device, you can access a wireless local area network (WLAN), which is composed of other computers and accessories that are linked by a wireless router or a wireless access point. NOTE: The terms wireless router and wireless access point are often used interchangeably.
  • Page 35 the public environment more secure and anonymous. If you are concerned about the security of your computer in a hotspot, limit your network activities to noncritical e-mail and basic Internet surfing. When you set up a WLAN or access an existing WLAN, always enable security features to protect your network from unauthorized access.

  • Page 36: Connecting To A Wlan

    Connecting to a WLAN To connect to the WLAN, follow these steps: Be sure that the WLAN device is on. If it is on, the wireless lights are on (blue). If the wireless lights are amber, press the wireless button. Select Start >...

  • Page 37: Using Hp Mobile Broadband (Select Models Only)

    Using HP Mobile Broadband (select models only) HP Mobile Broadband enables your computer to use wireless wide area networks (WWANs) to access the Internet from more places and over larger areas than it can by using WLANs. Using HP Mobile Broadband requires a network service provider (called a mobile network operator), which in most cases is a mobile phone network operator.

  • Page 38: Removing A Sim

    Remove the battery. Insert the SIM into the SIM slot, and gently push the SIM into the slot until it is firmly seated. Replace the battery. NOTE: HP Mobile Broadband will be disabled if the battery is not replaced. Turn the computer right-side up, and then reconnect external power and external devices. Turn on the computer.
  • Page 39 Press in on the SIM (1), and then remove it from the slot (2). Replace the battery. Turn the computer right-side up, and then reconnect external power and external devices. Turn on the computer. Using HP Mobile Broadband (select models only)

  • Page 40: Using A Bluetooth Wireless Device

    Using a Bluetooth wireless device A Bluetooth device provides short-range wireless communications that replace the physical cable connections that traditionally link electronic devices such as the following: ● Computers (desktop, notebook, PDA) ● Phones (cellular, cordless, smart phone) ● Imaging devices (printer, camera) ●...

  • Page 41: Troubleshooting Wireless Network Problems

    Troubleshooting wireless network problems Some possible causes for wireless connection problems include the following: ● Wireless device is not installed correctly or has been disabled. ● Wireless device or router hardware has failed. ● Network configuration (SSID or security) has been changed. ●...

  • Page 42: Cannot Connect To A Preferred Network

    Cannot connect to a preferred network Windows can automatically repair a corrupted WLAN connection: ● If there is a network status icon in the notification area, at the far right of the taskbar, right-click the icon, and then click Diagnose and repair from the menu. Windows resets your network device and attempts to reconnect to one of the preferred networks.

  • Page 43: Wlan Connection Is Very Weak

    If you are provided with new wireless network keys and SSID for a network, and if you have previously connected to that network, follow these steps to connect to the network: Select Start > Network > Network and Sharing Center > Manage wireless networks. A list showing the available WLANs is displayed.

  • Page 44: Using The Modem (Select Models Only)

    Using the modem (select models only) The modem must be connected to an analog telephone line using a 6-pin, RJ-11 modem cable (purchased separately). In some countries or regions, a country- or region-specific modem cable adapter (purchased separately) is also required. Jacks for digital PBX systems may resemble analog telephone jacks, but they are not compatible with the modem.

  • Page 45: Connecting A Country- Or Region-Specific Modem Cable Adapter

    Connecting a country- or region-specific modem cable adapter Telephone jacks vary by country or region. To use the modem and the modem cable (purchased separately) outside the country or region in which you purchased the computer, you must obtain a country- or region-specific modem cable adapter (purchased separately).

  • Page 46: Adding New Locations When Traveling

    Adding new locations when traveling By default, the only location setting available to the modem is a location setting for the country or region in which you purchased the computer. As you travel to different countries or regions, set the internal modem to a location setting that meets the operating standards of the country or region in which you are using the modem.

  • Page 47: Solving Travel Connection Problems

    Solving travel connection problems If you experience modem connection problems when using the computer outside of the country or region in which you purchased it, try the following suggestions. ● Check the telephone line type. The modem requires an analog, not a digital, telephone line. A line described as a PBX line is usually a digital line.

  • Page 48: Connecting To A Local Area Network (Lan)

    Connecting to a local area network (LAN) Connecting to a local area network (LAN) requires an 8-pin, RJ-45 network cable (purchased separately). If the network cable contains noise suppression circuitry (1), which prevents interference from TV and radio reception, orient the circuitry end of the cable (2) toward the computer. To connect the network cable: Plug the network cable into the network jack (1) on the computer.

  • Page 49: Pointing Devices And Keyboard

    Pointing devices and keyboard Using pointing devices Setting pointing device preferences Use Mouse Properties in Windows® to customize settings for pointing devices, such as button configuration, click speed, and pointer options. To access Mouse Properties, select Start > Control Panel > Hardware and Sound > Mouse. Using the TouchPad To move the pointer, slide your finger across the TouchPad surface in the direction you want the pointer to go.
  • Page 50 To use a hotkey command on the computer keyboard, follow either of these steps: ● Briefly press the key, and then briefly press the second key of the hotkey command. – or – ● Press and hold down the key, briefly press the second key of the hotkey command, and then release both keys at the same time.
  • Page 51 Hotkey Description fn+f9 Decreases the screen brightness level incrementally. fn+f10 Increases the screen brightness level incrementally. Using the keyboard...

  • Page 52: Using Hp Quicklook 3

    Using HP QuickLook 3 QuickLook 3 allows you to save calendar, contact, inbox, and task information from Microsoft Outlook to the hard drive of your computer. Then, when the computer is off, you can press the QuickLook button on the computer to view this information without waiting for the operating system to restart. Use QuickLook 3 to manage contact information, calendar events, e-mail information, and tasks without restarting your computer.

  • Page 53: Enabling And Disabling The Embedded Numeric Keypad

    Component Description Embedded numeric keypad When the keypad has been enabled, it can be used like an external numeric keypad. num lk Enables/disables the embedded numeric keypad when pressed in combination with the key. Enabling and disabling the embedded numeric keypad Press fn+num lk to enable the embedded numeric keypad.

  • Page 54: Using An Optional External Numeric Keypad

    Component Description num lk Alternates between the navigation and numeric functions on the integrated numeric keypad. NOTE: The keypad function that is active when the computer is turned off will be reinstated when the computer is turned back on. Integrated numeric keypad Can be used like the keys on an external numeric keypad.

  • Page 55: Multimedia

    Multimedia Multimedia features Your computer includes multimedia features that allow you to listen to music and view pictures. Your computer may include the following multimedia components: ● Optical drive for playing audio and video discs ● Integrated speakers for listening to music ●...

  • Page 56: Multimedia Software

    ◦ To increase volume, press and hold the volume up button (3) until the desired volume level is reached. You can also tap the volume up button. ● Windows volume control: Click the Volume icon in the notification area, at the far right of the taskbar. Increase or decrease the volume by moving the slider up or down.

  • Page 57: Accessing Your Preinstalled Multimedia Software

    Accessing your preinstalled multimedia software To access preinstalled multimedia software: Select Start > All Programs, and then open the multimedia program you want to use. ▲ NOTE: Some programs may be located in subfolders. NOTE: For details about using software included with the computer, refer to the software manufacturer’s instructions.

  • Page 58: Audio

    Audio Your computer enables you to use a variety of audio features: ● Play music using your computer speakers and/or connected external speakers ● Record sound using the internal microphones or connect an external microphone ● Download music from the Internet ●...
  • Page 59 NOTE: For best results when recording, speak directly into the microphone and record sound in a setting free of background noise. To confirm or change the audio settings on your computer, right-click the Sound icon on the ▲ taskbar, or select Start > Control Panel > Audio. Audio...

  • Page 60: Video

    Video Your computer enables you to use a variety of video features: ● Watch movies ● Play games over the Internet ● Edit pictures and video to create presentations ● Connect external video devices Connecting an external monitor or projector Your computer has both an external monitor port and a DisplayPort that allow you to connect external monitors and projectors.
  • Page 61 To connect a digital display device, connect the device cable to the DisplayPort. ▲ NOTE: If a properly connected external display device does not display an image, press fn+f4 transfer the image to the device. Repeatedly pressing fn+f4 alternates the screen image between the computer display and the device.

  • Page 62: Optical Drive (Select Models Only)

    Optical drive (select models only) Your computer may include an optical drive that expands the functionality of the computer. The optical drive allows you to read data discs, play music, and watch movies. Identifying the optical drive Select Start > Computer. ▲...

  • Page 63: Changing Dvd Region Settings

    Click Choose a default, and then select one of the available options for each media type listed. NOTE: Choose WinDVD to play DVDs. Click Save. NOTE: For more information about AutoPlay, select Start > Help and Support. Changing DVD region settings Most DVDs that contain copyrighted files also contain region codes.

  • Page 64: Copying A Cd, Dvd, Or Bd

    CAUTION: To prevent loss of information or damage to a disc, observe the following guidelines: Before writing to a disc, connect the computer to a reliable external power source. Do not write to a disc while the computer is running on battery power. Before writing to a disc, close all open programs except the disc software you are using.

  • Page 65: Removing An Optical Disc (Cd, Dvd, Or Bd)

    To burn a CD or DVD, follow these steps: Download or copy the source files into a folder on your hard drive. Insert a blank CD or DVD into the optical drive (select models only) or an optional external optical drive.

  • Page 66: The Optical Disc Tray Does Not Open For Removal Of A Cd, Dvd, Or Bd

    The optical disc tray does not open for removal of a CD, DVD, or BD Insert the end of a paper clip (1) into the release access in the front bezel of the drive. Press in gently on the paper clip until the disc tray is released, and then pull out the tray (2) until it stops.

  • Page 67: A Disc Does Not Play

    ● Scan for hardware changes. Windows scans your system for installed hardware and installs any required default drivers. ● Click Properties to see if the device is working properly. ◦ Click Troubleshoot to fix problems. ◦ Click the Driver tab to update, disable, or uninstall drivers for this device. A disc does not play ●...

  • Page 68: A Movie Stops, Skips, Or Plays Erratically

    A movie stops, skips, or plays erratically ● Clean the disc. ● Conserve system resources by trying the following suggestions: ◦ Log off the Internet. ◦ Change the color properties of the desktop: 1. Right-click on a blank area of the computer desktop, and select Personalize > Display Settings.

  • Page 69: A Device Driver Must Be Reinstalled

    A device driver must be reinstalled Remove any discs from the optical drive. Click Start and type device manager in the Start Search box. As you type, search results are listed in the pane above the box. In the results pane, click Device Manager. If prompted by User Account Control, click Continue. In the Device Manager window, click the plus sign (+) next to the type of driver you want to uninstall and reinstall (for example, DVD/CD-ROMs, Modems, and so on), unless a minus sign (-) is already showing.
  • Page 70 To use Microsoft Update: Open your Web browser and go to http://www.microsoft.com, and click Security & Updates. Click Microsoft Update to get the latest updates for your computer operating system, programs, and hardware. Follow the on-screen instructions to install Microsoft Update. If prompted by User Account Control, click Continue.

  • Page 71: Webcam (Select Models Only)

    Webcam (select models only) Your computer may include an integrated webcam, located at the top of the display. With the preinstalled software, you can use the webcam to take a photo or record a video. You can preview the photo or video recording and save it on your computer hard drive.
  • Page 72 tones without dramatically altering the shadows and highlights. A lower gamma setting makes grays look black, and makes dark colors even darker. For information about using the webcam, select Start > Help and Support. Chapter 4 Multimedia...

  • Page 73: Power Management

    Power management Setting power options Using power-saving states The computer has two power-saving states enabled at the factory: Sleep and Hibernation. When Sleep is initiated, the power lights blink and the screen clears. Your work is saved to memory, letting you exit Sleep faster than exiting Hibernation. If the computer is in the Sleep state for an extended period or if the battery reaches a critical battery level while in the Sleep state, the computer initiates Hibernation.

  • Page 74: Initiating And Exiting Hibernation

    When the computer exits Sleep, the power lights turn on and your work returns to the screen where you stopped working. NOTE: If you have set a password to be required when the computer exits Sleep, you must enter your Windows password before your work will return to the screen.

  • Page 75: Viewing The Current Power Plan

    You can change power plan settings or create your own power plan. Viewing the current power plan Move the pointer over the battery meter icon in the notification area, at the far right of the taskbar. ▲ – or – Select Start >...

  • Page 76: Using Power Assistant (Select Models Only)

    Using Power Assistant (select models only) Power Assistant allows you to configure system settings to optimize your computer's power consumption and battery charge. Power Assistant provides tools and information to help you make informed decisions on power management: ● Power consumption predictions in hypothetical system configurations ●...

  • Page 77: Connecting The Ac Adapter

    When you connect the computer to external AC power, the following events occur: ● The battery begins to charge. ● If the computer is turned on, the battery meter icon in the notification area changes appearance. When you disconnect external AC power, the following events occur: ●...

  • Page 78: Using Battery Power

    Using battery power When a charged battery is in the computer and the computer is not plugged into external power, the computer runs on battery power. When the computer is plugged into external AC power, the computer runs on AC power. If the computer contains a charged battery and is running on external AC power supplied through the AC adapter, the computer switches to battery power if the AC adapter is disconnected from the computer.

  • Page 79: Displaying The Remaining Battery Charge

    Displaying the remaining battery charge Move the pointer over the battery meter icon in the notification area, at the far right of the taskbar. ▲ – or – View the estimated number of minutes of battery charge remaining in Windows Mobility Center: Click the battery meter icon, and then click Windows Mobility Center.

  • Page 80: Charging A Battery

    Remove the battery from the computer (2). Charging a battery WARNING! Do not charge the computer battery while you are onboard aircraft. The battery charges whenever the computer is plugged into external power through an AC adapter, an optional power adapter, an optional expansion product, or an optional docking device. The battery charges whether the computer is off or in use, but it charges faster when the computer is off.

  • Page 81: Maximizing Battery Discharge Time

    ● Blinking amber: A battery that is the only available power source has reached a low battery level. When the battery reaches a critical battery level, the battery light begins blinking rapidly. ● Off: If the computer is plugged into an external power source, the light turns off when all batteries in the computer are fully charged.

  • Page 82: Resolving A Low Battery Level When A Charged Battery Is Available

    Resolving a low battery level when a charged battery is available Turn off the computer or initiate Hibernation. Remove the discharged battery, and then insert a charged battery. Turn on the computer. Resolving a low battery level when no power source is available Initiate Hibernation.

  • Page 83: Step 2: Disable Hibernation And Sleep

    Step 2: Disable Hibernation and Sleep Click the battery meter icon in the notification area, and then click More power options. – or – Select Start > Control Panel > System and Maintenance > Power Options. Under the current power plan, click Change plan settings. Record the Turn off the display and Put the computer to sleep settings listed in the On battery column so that you can reset them after the calibration.

  • Page 84: Step 4: Fully Recharge The Battery

    Step 4: Fully recharge the battery To recharge the battery: Plug the computer into external power and maintain external power until the battery is fully recharged. When the battery is recharged, the battery light on the computer turns off. You can use the computer while the battery is recharging, but the battery will charge faster if the computer is off.

  • Page 85: Disposing Of A Used Battery

    If a computer will be unused and unplugged from external power for more than 2 weeks, remove the battery and store it separately. To prolong the charge of a stored battery, place it in a cool, dry place. NOTE: A stored battery should be checked every 6 months. If the capacity is less than 50 percent, recharge the battery before returning it to storage.

  • Page 86: Testing An Ac Adapter

    Testing an AC adapter Test the AC adapter if the computer exhibits any of the following symptoms: ● The computer will not turn on when connected to the AC adapter. ● The display does not turn on when the computer is connected to the AC adapter and external power.
  • Page 87 If the computer is unresponsive and you are unable to use the preceding shutdown procedures, try the following emergency procedures in the sequence provided: ● Press ctrl+alt+delete, and then press the power button. ● Press and hold the power button for at least 5 seconds. ●...

  • Page 88: Drives

    Drives Identifying installed drives Your computer includes a hard drive (with a rotating disc) or a solid-state drive (SSD) with solid-state memory. Because it has no moving parts, an SSD does not generate as much heat as a hard drive. To view the drives installed on the computer, select Start >...
  • Page 89 CAUTION: To reduce the risk of damage to the computer, damage to a drive, or loss of information, observe these precautions: Before you move a computer that is connected to an external hard drive, initiate Sleep and allow the screen to clear, or properly disconnect the external hard drive. Before handling a drive, discharge static electricity by touching the unpainted metal surface of the drive.

  • Page 90: Improving Hard Drive Performance

    Improving hard drive performance Using Disk Defragmenter As you use the computer, files on the hard drive become fragmented. Disk Defragmenter consolidates the fragmented files and folders on the hard drive so that the system can run more efficiently. After you start Disk Defragmenter, it works without supervision. Depending on the size of your hard drive and the number of fragmented files, Disk Defragmenter may take more than an hour to complete.

  • Page 91: Using Hp 3D Driveguard

    Using HP 3D DriveGuard HP 3D DriveGuard protects the hard drive by parking the drive and halting I/O requests under either of the following conditions: ● You drop the computer. ● You move the computer with the display closed while the computer is running on battery power. A short time after the end of one of these events, HP 3D DriveGuard returns the hard drive to normal operation.

  • Page 92: Using Hp 3D Driveguard Software

    Using HP 3D DriveGuard software The HP 3D DriveGuard software enables you to perform the following tasks: ● Enable and disable HP 3D DriveGuard. NOTE: Permission to enable or disable HP 3D DriveGuard is dependent on certain user privileges. Members of an Administrator group can change privileges for non-Administrator users. ●...

  • Page 93: Replacing A Hard Drive In The Hard Drive Bay

    Replacing a hard drive in the hard drive bay CAUTION: To prevent information loss or an unresponsive system: Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the hard drive while the computer is on, in the Sleep state, or in Hibernation. If you are not sure whether the computer is off or in Hibernation, turn the computer on by briefly pressing the power button.
  • Page 94 Lift the hard drive (3) out of the hard drive bay. To install a hard drive: Insert the hard drive into the hard drive bay (1). Pull the hard drive tab (2) to the left to connect the hard drive. Tighten the hard drive screws (3).
  • Page 95 Align the tabs (1) on the hard drive cover with the notches on the computer. Replace the cover (2). Tighten the hard drive cover screws (3). Replace the battery. Turn the computer right-side up, and then reconnect external power and external devices. Turn on the computer.

  • Page 96: Replacing A Drive In The Upgrade Bay

    Replacing a drive in the upgrade bay The upgrade bay can hold either a hard drive or an optical drive. Removing the protective insert The upgrade bay may contain a protective insert. You must remove the insert before inserting a drive into the upgrade bay.
  • Page 97 To remove a hard drive from the upgrade bay: Save your work. Shut down the computer and close the display. Disconnect all external hardware devices connected to the computer. Unplug the power cord from the AC outlet. Turn the computer upside down on a flat surface, with the upgrade bay toward you. Remove the battery from the computer.
  • Page 98 Using a flat-bladed screwdriver, gently push the tab to release the hard drive (2). Remove the hard drive from the upgrade bay. Chapter 6 Drives...
  • Page 99 To install a hard drive in the upgrade bay: Insert the hard drive into the upgrade bay. Tighten the upgrade bay screw. Replacing a drive in the upgrade bay...

  • Page 100: Replacing An Optical Drive

    Replace the 4 hard drive screws (1), and then replace the protective screw caps (2). Replace the battery. Turn the computer right-side up, and then reconnect external power and external devices. Turn on the computer. Replacing an optical drive CAUTION: To prevent information loss or an unresponsive system: Shut down the computer before removing the optical drive from the upgrade bay.
  • Page 101 Using a flat-bladed screwdriver, gently push the tab to release the optical drive (2). Remove the optical drive from the upgrade bay. Replacing a drive in the upgrade bay...
  • Page 102 To install an optical drive in the upgrade bay: Insert the optical drive into the upgrade bay. Tighten the upgrade bay screw. Replace the battery. Turn the computer right-side up, and then reconnect external power and external devices. Turn on the computer. Chapter 6 Drives...

  • Page 103: External Devices

    External devices Using a USB device Universal Serial Bus (USB) is a hardware interface that can be used to connect an optional external device, such as a USB keyboard, mouse, drive, printer, scanner, or hub. Some USB devices may require additional support software, which is usually included with the device. For more information about device-specific software, refer to the manufacturer's instructions.

  • Page 104: Stopping And Removing A Usb Device

    Stopping and removing a USB device CAUTION: To prevent loss of information or an unresponsive system, stop a USB device before removing it. CAUTION: To prevent damage to a USB connector, do not pull on the cable to remove the USB device. To stop and remove a USB device: Double-click the Safely Remove Hardware icon in the notification area, at the far right of the taskbar.

  • Page 105: Using A 1394 Device

    Using a 1394 device IEEE 1394 is a hardware interface that connects a high-speed multimedia or data storage device to the computer. Scanners, digital cameras, and digital camcorders often require a 1394 connection. Some 1394 devices may require additional support software, which is usually included with the device. For more information about device-specific software, refer to the manufacturer's instructions.

  • Page 106: Using A Serial Device (Select Models Only)

    Click Stop, and then click OK. Remove the device. Using a serial device (select models only) Select computer models include a serial port that connects optional devices such as a serial modem, mouse, or printer. Some serial devices may require additional support software, which is usually included with the device. For more information about device-specific software, refer to the manufacturer's instructions.

  • Page 107: Using External Drives

    Using external drives Removable external drives expand your options for storing and accessing information. A USB drive can be added by connecting the drive to a USB port on the computer. USB drives include the following types: ● 1.44-megabyte diskette drive ●...

  • Page 108: Using A Docking Device

    Using a docking device The docking connector connects the computer to an optional docking device. An optional docking device provides additional ports and connectors that can be used with the computer. Chapter 7 External devices...

  • Page 109: External Media Cards

    External media cards Using Media Card Reader cards Optional digital cards provide secure data storage and convenient data sharing. These cards are often used with digital media–equipped cameras and PDAs as well as with other computers. The Media Card Reader supports the following formats: ●...

  • Page 110: Stopping And Removing A Digital Card

    Insert the card into the Media Card Reader, and then push in on the card until it is firmly seated. You will hear a sound when the device has been detected, and a menu of available options may be displayed. Stopping and removing a digital card CAUTION: To prevent loss of data or an unresponsive system, stop a digital card before removing it.

  • Page 111: Using Expresscards (Select Models Only)

    Using ExpressCards (select models only) An ExpressCard is a high-performance PC Card that is inserted into the ExpressCard slot. Like standard PC Cards, ExpressCards are designed to conform to the standard specifications of the Personal Computer Memory Card International Association (PCMCIA). Configuring an ExpressCard Install only the software required for your device.

  • Page 112: Stopping And Removing An Expresscard

    Insert the card into the ExpressCard slot, and then push in on the card until it is firmly seated. You will hear a sound when the device has been detected, and a menu of options may be displayed. NOTE: The first time you insert an ExpressCard, a message is displayed in the notification area to let you know the device is recognized by the computer.

  • Page 113: Using Smart Cards (Select Models Only)

    Using smart cards (select models only) NOTE: The term smart card is used throughout this chapter to refer to both smart cards and Java™ Cards. A smart card is a credit card–sized accessory that carries a microchip containing memory and a microprocessor.
  • Page 114 Grasp the edge of the smart card, and pull it out of the smart card reader. ▲ 104 Chapter 8 External media cards...

  • Page 115: Memory Modules

    Memory modules The computer has two memory module compartments. The primary memory module compartment is located under the keyboard. The expansion memory module compartment is located on the bottom of the computer. The memory capacity of the computer can be upgraded by adding a memory module to the empty expansion memory module slot or by upgrading the existing memory module in the primary memory module slot.

  • Page 116: Adding Or Replacing A Memory Module In The Expansion Memory Module Slot

    Adding or replacing a memory module in the expansion memory module slot To add or replace a memory module in the expansion memory module slot, follow these steps: Save your work. Shut down the computer and close the display. If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power button.
  • Page 117 Grasp the edge of the memory module (2), and gently pull the module out of the memory module slot. To protect a memory module after removal, place it in an electrostatic-safe container. Insert a memory module: Align the notched edge (1) of the memory module with the tab in the memory module slot. CAUTION: To prevent damage to the memory module, hold the memory module by the edges only.
  • Page 118 Gently press the memory module (3) down, applying pressure to both the left and right edges of the memory module, until the retention clips snap into place. Align the tabs (1) on the memory module compartment cover with the notches on the computer. Close the cover (2).

  • Page 119: Upgrading A Memory Module In The Primary Memory Module Slot

    Upgrading a memory module in the primary memory module slot To upgrade a memory module in the primary memory module slot, follow these steps: Save your work. Shut down the computer. If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power button.
  • Page 120 Gently lift the top edge of the keyboard (1) and slide the keyboard (2) out of the computer. Remove the memory module: Pull away the retention clips (1) on each side of the memory module. The memory module tilts up. CAUTION: To prevent damage to the memory module, hold the memory module by the edges only.
  • Page 121 Insert a memory module: Align the notched edge (1) of the memory module with the tab in the memory module slot. CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module and do not bend the memory module.
  • Page 122 Close the cover. Turn the computer upside down on a flat surface. Tighten the 3 keyboard access screws. Replace the batteries. Turn the computer right-side up, and then reconnect external power and external devices. Turn on the computer. 112 Chapter 9 Memory modules...

  • Page 123: 10 Security

    10 Security Protecting the computer NOTE: Security solutions are designed to act as deterrents. These deterrents may not prevent a product from being mishandled or stolen. NOTE: In some countries or regions, the computer supports CompuTrace, which is an online security- based tracking and recovery service.

  • Page 124: Using Passwords

    Using passwords Most security features use passwords. Whenever you set a password, write down the password and store it in a secure location away from the computer. Note the following password considerations: ● Setup and DriveLock password are set in Computer Setup and are managed by the system BIOS. ●...

  • Page 125: Bios Administrator Password

    BIOS administrator passwords Function DriveLock user password Protects access to the internal hard drive that is protected by DriveLock, and is set under DriveLock Password during the enable process. TPM embedded security password When enabled as a BIOS administrator password, protects access to the computer contents when the computer turns on, restarts, or exits Hibernation.

  • Page 126: Managing A Bios Administrator Password

    Managing a BIOS administrator password A BIOS administrator password is set, changed, and deleted in Computer Setup. To set or change this password in Computer Setup, follow these steps: Turn on or restart the computer, and then press while the “Press the ESC key for Startup Menu” message is displayed at the bottom of the screen.

  • Page 127: Entering A Bios Administrator Password

    Entering a BIOS administrator password At the BIOS administrator password prompt, type your password (using the same kind of keys you used to set the password), and then press enter. After 3 unsuccessful attempts to enter the BIOS administrator password, you must restart the computer and try again. Using Computer Setup DriveLock CAUTION: To prevent the DriveLock-protected hard drive from becoming permanently unusable,...

  • Page 128: Setting A Drivelock Password

    Setting a DriveLock password To set a DriveLock password in Computer Setup, follow these steps: Turn on the computer, and then press while the “Press the ESC key for Startup Menu” message is displayed at the bottom of the screen. Press to enter BIOS Setup.

  • Page 129: Entering A Drivelock Password

    Entering a DriveLock password Be sure that the hard drive is inserted into the computer (not into an optional docking device or external MultiBay). At the DriveLock Password prompt, type your user or master password (using the same kind of keys you used to set the password), and then press enter.

  • Page 130: Changing A Drivelock Password

    Changing a DriveLock password To change a DriveLock password in Computer Setup, follow these steps: Turn on the computer, and then press while the “Press the ESC key for Startup Menu” message is displayed at the bottom of the screen. Press to enter BIOS Setup.

  • Page 131: Removing Drivelock Protection

    Removing DriveLock protection To remove DriveLock protection in Computer Setup, follow these steps: Turn on the computer, and then press while the “Press the ESC key for Startup Menu” message is displayed at the bottom of the screen. Press to enter BIOS Setup. Use a pointing device or the arrow keys to select Security >...

  • Page 132: Removing Automatic Drivelock Protection

    Removing Automatic DriveLock protection To remove DriveLock protection in Computer Setup, follow these steps: Turn on or restart the computer, and then press while the “Press the ESC key for Startup Menu” message is displayed at the bottom of the screen. Press to enter BIOS Setup.

  • Page 133: Using Computer Setup Security Features

    Using Computer Setup security features Securing system devices You can disable or enable system devices from the following menus in Computer Setup: ● Boot Options ● Device Configurations ● Built-In Device Options ● Port Options To disable or reenable system devices in Computer Setup, follow these steps: Turn on or restart the computer, and then press while the “Press the ESC key for Startup Menu”...

  • Page 134: Using Computer Setup System Ids

    To view this general system information in Computer Setup, follow these steps: Turn on or restart the computer, and then press while the “Press the ESC key for Startup Menu” message is displayed at the bottom of the screen. Press to enter BIOS Setup.

  • Page 135: Using Antivirus Software

    Using antivirus software When you use the computer to access e-mail, a network, or the Internet, you expose the computer to computer viruses. Computer viruses can disable the operating system, programs, or utilities, or cause them to function abnormally. Antivirus software can detect most viruses, destroy them, and in most cases, repair any damage they have caused.

  • Page 136: Using Firewall Software

    Using firewall software When you use the computer to access e-mail, a network, or the Internet, unauthorized persons may be able to gain access to the computer, your personal files, and information about you. Use the firewall software preinstalled on the computer to protect your privacy. McAfee Total Protection antivirus software is preinstalled on the computer.

  • Page 137: Installing Critical Updates

    Installing critical updates CAUTION: Microsoft sends alerts regarding critical updates. To protect the computer from security breaches and computer viruses, install all critical updates from Microsoft as soon as you receive an alert. Updates to the operating system and other software may have become available after the computer was shipped.

  • Page 138: Using Hp Protecttools Security Manager (Select Models Only)

    Using HP ProtectTools Security Manager (select models only) HP ProtectTools Security Manager software is preinstalled on select computer models. This software can be accessed through Windows Control Panel. It provides security features that help protect against unauthorized access to the computer, networks, and critical data. For more information, refer to the HP ProtectTools software Help.

  • Page 139: Installing A Security Cable

    Installing a security cable NOTE: A security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. Loop the security cable around a secured object. Insert the key (1) into the cable lock (2). Insert the cable lock into the security cable slot on the computer (3), and then lock the cable lock with the key.

  • Page 140: 11 Software Updates

    11 Software updates Updating software Updated versions of the software provided with your computer are available either through the HP Software Update utility or on the HP Web site. The Software Update utility automatically checks for updates from HP. The utility runs at a specified interval and provides a list of support alerts, such as security enhancements, and optional software and driver updates.
  • Page 141 To update the software using the HP Web site, follow these steps: Identify your computer model, product category, and series or family. Prepare for a system BIOS update by identifying the BIOS version currently installed on the computer. For details, refer to the "Determining the BIOS version"...

  • Page 142: Updating The Bios

    Updating the BIOS To update the BIOS, first determine what BIOS version you currently have, and then download and install the new BIOS. Determining the BIOS version BIOS version information (also known as ROM date and System BIOS) can be displayed by pressing fn+esc (if you are already in Windows) or by using Computer Setup.
  • Page 143 Follow the on-screen instructions to access the BIOS update you want to download. Make a note of the download date, name, or other identifier. You may need this information to locate the update later, after it has been downloaded to your hard drive. At the download area, perform these steps: Identify the BIOS update that is newer than the BIOS version currently installed on your computer.

  • Page 144: Updating Programs And Drivers

    Updating programs and drivers Open your Web browser, go to http://www.hp.com/support, and then select your country or region. Click the option for software and driver downloads, type your computer model number in the product box, and then press enter. Click your specific product from the models listed. Click your operating system.

  • Page 145: 12 Backup And Recovery

    12 Backup and recovery To protect your information, use the Backup and Restore Center to back up individual files and folders, back up your entire hard drive (select models only), or create system restore points. In case of system failure, you can use the backup files to restore the contents of your computer. The Backup and Restore Center provides the following options: ●...

  • Page 146: Backing Up Your Information

    Backing up your information Recovery after a system failure is as complete as your most current backup. You should create your initial backup immediately after software setup. As you add new software and data files, you should continue to back up your system on a regular basis to maintain a reasonably current backup. You can back up your information to an optional external hard drive, a network drive, or discs.

  • Page 147: Performing A Recovery

    Performing a recovery In case of system failure or instability, the computer provides the following tools to recover your files: ● Windows recovery tools: You can use the Backup and Restore Center to recover information you have previously backed up. You can also use Windows Startup Repair to fix problems that might prevent Windows from starting correctly.

  • Page 148: Using F11 Recovery Tools

    Using f11 recovery tools CAUTION: Using completely erases hard drive contents and reformats the hard drive. All files you have created and any software installed on the computer are permanently removed. The recovery tool reinstalls the operating system and HP programs and drivers that were installed at the factory. Software not installed at the factory must be reinstalled.
  • Page 149 Click Next. Select Repair your computer. Follow the on-screen instructions. Performing a recovery 139...

  • Page 150: 13 Computer Setup

    13 Computer Setup Starting Computer Setup Computer Setup is a preinstalled, ROM-based utility that can be used even when the operating system is not working or will not load. NOTE: Some of the Computer Setup menu items listed in this guide may not be supported by your computer.

  • Page 151: Restoring Factory Settings In Computer Setup

    To exit Computer Setup menus, choose one of the following methods: ● To exit Computer Setup menus without saving your changes, click the Exit icon in the lower-left corner of the screen, and then follow the on-screen instructions. – or – Use the key and the arrow keys to select File >...

  • Page 152: File Menu

    File menu Select To do this System Information ● View identification information for the computer and the batteries in the system. ● View specification information for the processor, cache and memory size, system ROM, video revision, and keyboard controller version. Set System Date and Time Set or change the date and time on the computer.

  • Page 153: System Configuration Menu

    Select To do this HP SpareKey Enable/disable HP SpareKey (enabled by default). Always Prompt for HP SpareKey Enrollment Enable/disable HP SpareKey enrollment (enabled by default). Fingerprint Reset on Reboot (If Present) Reset/clear the fingerprint reader ownership (select models only; disabled by default). Change Password Enter, change, or delete a BIOS administrator password.
  • Page 154 Select To do this ● Enable/disable SD Card boot (enabled by default). ● Enable/disable floppy boot (enabled by default). ● Enable/disable PXE Internal NIC boot (enabled by default). ● Enable/disable Unified Extensible Firmware Interface (UEFI) Boot Mode (disabled by default). ●...
  • Page 155 Select To do this ● Enable/disable Num lock state at boot (disabled by default). ● Enable/disable TXT (Intel® Trusted Execution Technology) (select models only; disabled by default). ● Built-In Device Options Enable/disable the wireless button state (enabled by default). ● Enable/disable embedded WLAN device radio (select models only;...
  • Page 156 Select To do this ● Enable/disable the 1394 port. ● Enable/disable the ExpressCard slot. ● Enable/disable the smart card slot. ● Enable/disable the eSATA/USB port. Set Security Level Change, view, or hide security levels for all BIOS menu items. Restore Security Defaults Restore the default security settings.

  • Page 157: 14 Multiboot

    14 MultiBoot About the boot device order As the computer starts, the system attempts to boot from enabled boot devices. The MultiBoot utility, which is enabled at the factory, controls the order in which the system selects a boot device. Boot devices can include optical drives, diskette drives, a network interface card (NIC), hard drives, and USB devices.
  • Page 158 NOTE: An optical drive (such as a CD-ROM drive) can boot either as drive A or drive C, depending on the format of the boot CD. 148 Chapter 14 MultiBoot...

  • Page 159: Enabling Boot Devices In Computer Setup

    Enabling boot devices in Computer Setup The computer will boot to a USB device or a NIC device only if the device has first been enabled in Computer Setup. To start Computer Setup and enable a USB device or a NIC device as a boot device, follow these steps: Turn on or restart the computer, and then press while the “Press the ESC key for Startup Menu”...

  • Page 160: Considering Boot Order Changes

    Considering boot order changes Before changing the boot order, note the following considerations: ● When the computer restarts after the boot order has been changed, the computer attempts to start using the new boot order. ● If there is more than one type of boot device, the computer attempts to boot using the first of each type of boot device (except for optical devices).

  • Page 161: Choosing Multiboot Preferences

    Choosing MultiBoot preferences You can use MultiBoot in the following ways: ● To set a new boot order that the computer uses each time it is turned on, by changing the boot order in Computer Setup. ● To dynamically choose the boot device, by pressing while the “Press the ESC key for Startup Menu”...

  • Page 162: Dynamically Choosing A Boot Device Using The F9 Prompt

    Dynamically choosing a boot device using the F9 prompt To dynamically choose a boot device for the current startup sequence, follow these steps: Open the Select Boot Device menu by turning on or restarting the computer, and then pressing while the “Press the ESC key for Startup Menu” message is displayed at the bottom of the screen.

  • Page 163: 15 Management And Printing

    15 Management and printing Using Client Management Solutions Client Management Solutions software provides standards-based solutions for managing client (user) desktop, workstation, notebook, and tablet computers in a networked environment. Client management includes the following key capabilities and features: ● Initial software image deployment ●...

  • Page 164: Managing And Updating Software

    Managing and updating software HP provides several tools for managing and updating software on client computers: ● HP Client Manager for Altiris (select models only) NOTE: To download HP Client Manager for Altiris or to obtain more information about HP Client Manager for Altiris, see the HP Web site at http://www.hp.com.
  • Page 165 ● Help desk and problem resolution ◦ Management of help desk tickets ◦ Remote troubleshooting ◦ Remote problem resolution ◦ Client disaster recovery ● Software and operations management ◦ Ongoing client management ◦ HP system software deployment ◦ Application self-healing (the ability to identify and repair certain application problems) Altiris Solutions software provides easy-to-use software distribution capabilities.

  • Page 166: Hp Ccm (Client Configuration Manager) (Select Models Only)

    HP CCM (Client Configuration Manager) (select models only) HP CCM (Client Configuration Manager) automates the management of software such as operating systems, programs, software updates, and content and configuration settings to ensure that each computer is maintained in the correct configuration. With these automated management solutions, you can manage software throughout the life cycle of the computer.

  • Page 167: Hp Ssm (System Software Manager)

    HP SSM (System Software Manager) HP SSM (System Software Manager) lets you remotely update system-level software on multiple systems simultaneously. When executed on a client computer, SSM detects versions of both hardware and software, and then updates designated software from a central repository, known as a file store. Driver versions that are supported by SSM are denoted with a special icon on the HP driver download Web site and on the Support Software CD.

  • Page 168: Using The Hp Universal Print Driver (Select Models Only)

    Using the HP Universal Print Driver (select models only) The HP Universal Print Driver Series for Windows is a single intelligent driver that replaces individual drivers for HP networked printers. NOTE: The HP Universal Print Driver is preinstalled on select computer models only. To download the HP Universal Print Driver or obtain more information about using it, see the HP Web site at http://www.hp.com/go/universalprintdriver (English only).

  • Page 169: 16 Routine Care

    16 Routine care Cleaning products Use the following products to safely clean and disinfect your computer: ● Dimethyl benzyl ammonium chloride 0.3 percent maximum concentration (For example: germicidal disposable wipes. These wipes come in a variety of brand names.) ● Alcohol-free glass cleaning fluid ●...

  • Page 170: Cleaning Procedures

    Cleaning procedures Follow the procedures in this section to safely clean your computer. WARNING! To prevent electric shock or damage to components, do not attempt to clean your computer while it is turned on: Turn off the computer. Disconnect external power. Disconnect all powered external devices.

  • Page 171: Index

    Index Symbols/Numerics battery bay 16, 20 wireless button 145 1394 cable, connecting 95 battery charge, maximizing 71 WLAN device radio 145 1394 devices battery light 12, 70, 71 built-in device options 145 connecting 95 battery power 68 buttons stopping 95 battery release latch 16, 69 mute 8, 9 1394 port 95...
  • Page 172 top 1 display components 17 external monitor port, wireless antennas 18 display release latch, identifying 15 computer information 132 identifying 11 external optical drive 97 Computer Setup DisplayPort, identifying 14 BIOS administrator docking connector, identifying 16 f11 recovery 138 password 115 drive light 12, 81 File menu 142 device security 123...
  • Page 173 inserting a memory module serial number 19 monitor port, external 15 expansion 107 SIM 20 monitor, connecting 50 primary 111 wireless certification 20 mouse, external integrated numeric keypad keys, WLAN 20 connecting 39 identifying 11 LAN Power Save 145 setting preferences 39 integrated numeric keypad, LAN, connecting 38 MultiBoot Express 147, 152...
  • Page 174 ports restoring the hard drive 138 slots 1394 95 RJ-45 (network) jack, memory 105 DisplayPort 14 identifying 15 security cable 13, 15 eSATA/USB 14 SIM 16 external monitor 15, 50 smart card SATA (Serial Advanced USB 14, 93 defined 103 Technology Attachment) devices power inserting 103...
  • Page 175 turning off the computer 76 Wireless Assistant software 22, TXT (Intel Trusted Execution Technology) 145 wireless button 22 wireless button, identifying 8, 9 wireless certification label 20 Unified Extensible Firmware wireless compartment, Interface (UEFI) mode 144 identifying 16 unresponsive system 76 wireless controls updates, software 154 button 22...

This manual is also suitable for:

Probook 6455bProbook 6550bProbook 6555b

Table of Contents