System Board; System Board Switch Settings - HP D5970A - NetServer - LCII Service & Reference Manual

System Board

VRM (166 MHz Processor) or
Shunt (133 MHz Processor)
Power Supply
Connector
Processor chip
(133 or 166 MHz)
Cache memory
Bank C
Memory SIMM
Bank B
Connectors
Bank A
Power Switch
and Activity LED
Connector
Power Supply
Connector
IDE 1 Connector
IDE 2 Connector
Flexible disk connector

System Board Switch Settings

Switch Factory
position preset
1, 2, 3. & (See table
4 below)
5 Open
6 Open
7 Closed
8 Open
9 Closed
10 Open
System Board
Retaining Latch
Select processor speed settings. The switch positions may need to be
changed when upgrading the processor. See the table below for required
settings for your Intel 166 MHz CPU.
Clears the password. Set the switch to the closed position and restart the
NetServer to clear the password. Return the switch to the open position and
restart the NetServer to return to normal operation.
Resets the CMOS configuration to the default values. Set the switch to the
closed position and restart the NetServer to reset the CMOS. Return the
switch to the open position and restart the NetServer to return to normal
operation.
Reserved
Reserved
Enable or disable space bar power-on. If you want to enable this feature, set
this switch to Closed. If you want to disable it, set this switch to Open. This
feature must also be configured in the BIOS using the SETUP utility.
Reserved
Battery
DIP Switch Package
Definition:
Display Monitor
Connector
Keyboard Connector
Mouse Connector
Com 1 Serial
Port Connector
Com 2 Serial
Port Connector
Parallel Port
Connector
33