HP D5970A - NetServer - LCII Configuration Manual page 68

Microsoft cluster for server with hp a3661b model 30/fc high availability disk array

Hide thumbs Also See for D5970A - NetServer - LCII:

Table of Contents

Set the HP FC-AL hub on the cabinet. Align the hole in each mounting ear bracket with the holes in the assembled

rail, nut, and column, and insert a 10-32 x .625 machine screw. Securely tighten the screws (see figure 7).

The plenum shroud is a back cover that slides onto the HP FC-AL hub. Set the plenum shroud on the front side of

the cabinet. Align the holes in the brackets with the holes in the assembled rails and outer posts.

Secure the brackets to the posts with 10-32 x .625 machine screws (see figure 8).

Reinstall filler panels over the plenum shroud.

Figure 7. Installing the HP FC-AL hub into the cabinet

Figure 8. Installing the plenum shroud

Plenum shroud

Table of Contents

Chapters

Table of Contents