Panasonic PT-FW430U Operating Instructions Manual page 13

NETWORK menu (continued)
AUTHENTICATION
q w
OPEN
SHARED
WPA-PSK
_ 2
WPA2-PSK
_
WPA-EAP/
WPA2-EAP
_
WPA-EAP
_ 2
WPA2-EAP
_
ENCRYPTION
q w
NONE
WEP
_
1
TKIP
_
1
AES
_
1
1: "Glossary" (
_
2: Available when the mode is set to [INFRASTRUCTURE].
_
Important video/audio data is protected because AES encryption pr ng takes place in advance for all
network numbers, even if [ENCRYPTION] is set to [NONE].
4
Press ▲ ▼◄► to select [NEXT], and press <ENTER> button.
At this point, select [RETURN] to go back to the previous screen (1/3), or select [CANCEL] to cancel the
configuration change.
In addition, further perform the following setting depending on [AUTHENTICATION] and [ENCRYPTION]
settings.
WIRELESS DETAILED SETUP
SELECT
: Set the user authentication method used by the network to be connected.
: Select when making a connection using [AD HOC], or when the access
point authentication method is OpenSystem
: Select when making a connection using [AD HOC], or when the access
point authentication method is Shared Key
: Select when the access point authentication method is WPA-PSK
: Select when the access point authentication method is WPA2-PSK
2
: Select when the access point authentication method is WPA-EAP
WPA2-EAP
2
: Select when the access point authentication method is WPA-EAP
: Select when the access point authentication method is WPA2-EAP
2
: Select the encryption method to be used for communication between the
projector and the network.
: Select when transmit without encryption. It is selectable only when
[AUTHENTICATION] is [OPEN] or [SHARED].
: Select when ENCRYPTION is WEP.
: Select when ENCRYPTION is TKIP.
Selectable when [AUTHENTICATION] is either [WPA-PSK], [WPA2-PSK],
[WPA-EAP], [WPA2-EAP].
: Select when ENCRYPTION is AES.
Selectable when [AUTHENTICATION] is either [WPA-PSK], [WPA2-PSK],
[WPA-EAP], [WPA2-EAP].
See page 44 – 45)
USER1
DEFAULT KEY
KEY 1
KEY 2
KEY 3
CANCEL
KEY 4
RETURN
.
_ 1
3/3
1
OK CANCEL
.
_
1
.
_ 1
_
_
_
.
1
.
_
1
/
1
.
1
.
_ 1
13