Panasonic WV-SW175 Operating Instructions Manual page 110

11 Configure the settings relating to images and audio [Image/Audio]
•
ATW2: Selects the automatic tracing white balance mode under a sodium lamp. The camera will adjust
the white balance automatically under a sodium lamp. Operating color temperature range is approx. 2,000
K - 6,000 K.
•
AWC: Selects the automatic white balance control mode. This adjustment is suitable for a location where
a light source is stable. Operating color temperature range is approx. 2,000 K - 10,000 K.
•
Default: ATW1
Note
•
Under the following conditions, color may not be faithfully processed. In these cases, select "AWC".
–
When shooting a subject whose major part is a thick color
–
When shooting blue sky or sun at sunset
–
When shooting a subject whose luminance is too low
•
When "AWC" is selected, click the [Set] button.
[Red gain]
Adjust the red color of images.
When the cursor is moved in the "+" direction, the red color will become thicker.
When the cursor is moved in the "–" direction, the red color will be thinner.
Click the [Reset] button to reset the color to the default.
•
Default: 128
[Blue gain]
Adjust the blue color of images.
When the cursor is moved in the "+" direction, the blue color will become thicker.
When the cursor is moved in the "–" direction, the blue color will be thinner.
Click the [Reset] button to reset the color to the default.
•
Default: 128
[DNR]
The digital noise reduction function reduces noise automatically under the condition of low illuminance. Select
an effect level "High" or "Low" for the digital noise reduction.
•
High: High DNR, afterimage remains
•
Low: Low DNR, reduces afterimage
•
Default: High
[Chroma gain level]
Adjusts the chroma level (color density).
When the cursor is moved in the "+" direction, the colors will become thicker. When the cursor is moved in the
"–" direction, the colors will be thinner. Click the [Reset] button to reset the color to the default.
•
Default: 128
[Aperture level]
Adjust the aperture level (outline compensation).
Images will be sharper when the cursor is moved in the "+" direction, and will be softer when the cursor is
moved in the "–" direction.
Click the [Reset] button to reset the color to the default.
•
Default: 16
[Pedestal level]
Adjust the black level of images by moving the cursor. When the cursor is moved to the "+" direction, images
will become brighter. When the cursor is moved to the "–" direction, images will be darker. Click the [Reset]
button to reset the color to the default.
•
Default: 128
110 Operating Instructions