Table of Contents
Advertisement
*
When WiFI-AP @n is set to WPA2-PSK authentication with AES
2
encryption, Follow the instructions below if you want to connect other
computers to WiFi-AP @n.
•
•
1.
Launch Windows Zero
Configuration and click
Change advanced settings.
2.
Switch to the Wiress
Networks tab and click Add.
3.
In Network name (SSID), input
the SSID you set in the Wifi-AP
@n utility. Set the Network
Authertication to WPA2-PSK
and Data encryption to AES.
Input the Network key. Click
OK to close all windows.
3-12
Windows XP does not support WPA2-PSK authentication with AES
encryption, but you could download the Windows XP Hot fix KB893357
from Microsoft
official website at http://www.microsoft.com/en/us/
®
default.aspx. After installing the patch, follow the next steps to set up the
wireless network connection.
Windows
Vista natively supports WPA2-PSK authentication with AES
®
encryption. No further setting is needed.
Chapter 3: Setting up
Advertisement
Table of Contents
