Connecting The Ductwork; Air De Ector Installation (Recirculating Accessories) - Electrolux RH30WC55GS Installation, Use & Care Manual

Remove the hood.
Drive "lower" wood screws, by hand. Remove
screws.
Mount the hood onto the "upper" screws.
Drive and tighten the "upper" wood screws, by
hand.
Drive and tighten the "lower" wood screws, by
hand.

Connecting the ductwork

Connecting the ductwork Connecting the ductwork Connecting the ductwork Connecting the ductwork
Install ductwork, making connections in the
direction of air ow as illustrated.
Push duct over the exhaust outlet.
Wrap all duct joints and the ange connections
with duct tape for an airtight seal.
Make the same connection in the wall or ceiling
vent exit.
Installing the hood
Air de ector installation Air de ector installation Air de ector installation Air de ector installation Air de ector installation
(Recirculating accessories) (Recir (Recir (Recir (Recir culating accessories) culating accessories) culating accessories) culating accessories)
Assemble the air de ector with the duct cover
bracket with 4 assembly screws provided as
shown.
Measure from the bottom of the air de ector to
the bottom of the hood outlet, as shown.
Cut the duct at the measured size.
Uninstall the air de ector removing the 4
assembly screws.
Slip the duct onto the bottom of the de ector.
Place the assembled de ector and duct over the
exhaust outlet from the hood.
Assemble the air de ector to the duct cover
bracket with 4 assembly screws provided as
shown.
11 11 11 11
11