Input Panel; Control Codes - NEC NP-UM330W Installation Manual

Desktop and ceiling mount

Hide thumbs Also See for NP-UM330W:

UM330W Installation Guide

Desktop and Ceiling Mount

Input Panel

Note: Contact your NEC rep for codes not listed.

Cable Connection

Communication Protocol:

Baud Rate:

38400 bps

Data Length:

8 bits

Parity:

No Parity

Stop Bit:

One bit

X on/off:

None

Communications: Full duplex

NOTE 1: It is recommended to set the projector to "Idle Mode" in the Setup menu for best Power ON response.

NOTE 2: Pins 2, 3, 5, 6 and 8 are used inside the projector.

NOTE 3: For long cable runs it is recommended to set communication speed in the Setup menu to 9600 bps.

www.necdisplay.com

NEC Display Solutions of America, Inc.

To TxD of PC

To RxD of PC

To GND of PC

6 7

To RTS of PC

To CTS of PC

UM330W

Page 8 of 8

v1.1

Table of Contents

Um330w