Epson V11H181020SC - MovieMate 25 WVGA LCD Projector Product Support Bulletin page 4

EPSON
Date: 11/23/2005
PSB.2005.11.004
PSB #:
Reference: TI 05-51e Rev. A
Epson MovieMate 25
Product(s):
Do's and Don'ts of tilt angle for the Epson MovieMate projector
Subject:
Reason:
This bulletin is being released with guidelines on using the projector in a tilt position to avoid
possible issues in performance with the built-in DVD player and damage to media.
Question 1: Can the unit be lifted higher by tilting it to position the screen higher on the wall
or projection screen?
Answer 1: Yes, however Epson America, Incorporated (EAI) does not recommend using the
product in a tilted position due to performance issues such as video playback skipping, audio
not tracking properly and breaking up.
Question 2: What is the maximum number of degrees that the unit can be tilted up?
Answer 2: Although EAI cannot guarantee the performance of the projector when used under
such conditions, the projector could be tilted upward up to 5 degrees without problems.
However, the customer shall take full responsibility for such use or any damage incurred.
Question 3: What possible problems might a user have by using it in a tilted position?
Answer 3: Small, 8 cm disc media may pop off the tray when the tray is opened and the
projector is used in a tilted position. The disc may be scratched or damaged, which is not a
fault of the manufacturer. When using the product in a tilted position, discs may not sit well in
the player tray and may rattle while in playback operation.
P S
RODUCT UPPORT
B
ULLETIN
Page 1 of 1
PSB.2005.11.004A
Originator: JAM
Authorization:
Total Pages: 1