P2000 Drive Enclosure Port Information; D2700 Disk Enclosure Port Information - HP P2000 Deployment Manual
Hp bladesystem deployment guide for solutions with 6gb sas switches and external sas storage
Hide thumbs
Also See for P2000:
- Reference manual (448 pages) ,
- Release note (18 pages) ,
- Firmware release notes (10 pages)
Table of Contents
Advertisement
P2000 drive enclosure port information
P2000 drive enclosures are supported for use in P2000 G3 SAS MSA Array environments.
As shown in the following illustration:
SAS In port: One per I/O module. Labelled IN. Use this SAS expansion port to connect to a
P2000 G3 SAS controller enclosure or to a P2000 drive enclosure that is between this drive
enclosure and the controller enclosure.
SAS Out port: One per I/O module. Labelled OUT. Use this SAS expansion port to connect
(cascade) an additional P2000 drive enclosure.
NOTE:
Mini-SAS to mini-SAS cables are required when connecting P2000 drive enclosures.
D2700 disk enclosure port information
As shown in the following illustration:
SAS port 1: Labelled P1. Use this SAS expansion port for the connection to the host (through
the SAS Switch).
SAS port 2: Labelled P2. Use this SAS expansion port to connect (cascade) an additional disk
enclosure.
NOTE:
Mini-SAS to mini-SAS cables are required when connecting D2700 drive enclosures.
Device SAS port information
55
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
