Sanyo PLC-XU88 Specification Sheet

3 0 0 0 A N S I L U M E N S
PLC-XU88
XGA Ultraportable Multimedia Projector
ULTRA-COMPACT, FULLY PORTABLE XGA DESIGN
Not much larger than a laptop PC, the PLC-XU88 weighs less than 7.5 pounds
and delivers true XGA, 3000 A. L. picture quality in a versatile, go-anywhere
system. May also be ceiling or inverse mounted for enhanced versatility.
AUTO VERTICAL KEYSTONE CORRECTION
The PLC-XU88 automatically compensate for keystone picture distortion.
F1.6-2.5 ZOOM LENS WITH 1/2X TO 16X DIGITAL ZOOM
Comes with its own 1:1.57 zoom lens which can throw a crisp bright 100"
diagonal image from a distance of only 9.2'. The 1/2X to 16X digital zoom helps
highlight important program segments. Also auto vertical keystone and keystone
correction (vertical + 20 degrees), allow for optimal set-up.
TWO COMPUTER INPUTS (DVI-I AND D-SUB)
The PLC-XU88 has two computer input terminals – DVI-I input and D-sub input.
The D-sub terminal can be switched to be used as an analog RBG monitor out
for the DVI-I input. This terminal outputs only incoming RGB analog signals from
COMPUTER IN 1 / DVI-I terminal.
NETWORKING CAPABILITY
The PLC-XU88 is equipped with SANYO's exclusive PJ-Net Master Network
Interface software for wired and wireless networking, a common feature among
SANYO's extensive line of commercial projectors. Networking allows the
monitoring of projector functions and operation from a long distance via a web
browser for up 15,000 Sanyo projectors. Emails can be sent automatically to
report operating status. The wireless interface is compatible with IEEE802.11b/g
standards, offering transfer speeds up to 54Mbps and providing WEP 64/128-bit
security as well as, WPA and WPA2 security.
MEMORY VIEWER ALLOWS SD CARD
The PLC-XU88's built-in Memory Viewer can use an SD card memory dedicated
to the projector. With Memory Viewer, projected images can be edited with a
slide converter (Index data), bitmap data and JPEG data.
SECURITY FEATURES
A PIN code lock provides a setting for security. The PLC-XU88 projector cannot
be operated without a four digit number.
USER-SPECIFIED START-UP SCREEN
To create a smoother, more professional presentation, logo and image files may
be captured for display during the projector's countdown sequence at start-up.
POWER-OFF AND GO
No need to wait for the projector to cool down. You can disconnect the power
cord right after your presentation.
VARIABLE AUDIO OUT
This convenient feature allows the user to control the audio level right from the
projector. The centralization of video and audio controls from the projector helps
in educational applications by ensuring the technical quality of the presentation
and eliminating the fuss of separate outside audio controls.
Issued 1/08
T R U E X G A
PRESENTATION TECHNOLOGIES
21605 Plummer Street
Chatsworth, CA 91311
Ph: 888-337-1215 (toll-free)
Fax 818.717.2719
www.sanyoprojectors.com
M U L T I M E D I A P R O J E C T O R
S p e c i f i c a t i o n s
Resolution
Brightness
Uniformity
LCD Panel System
Number of Pixels
Contrast Ratio
Image Size (diagonal)
Aspect Ratio
Throw Distance
Zoom/Focus
Zoom Ratio
Up/Down Ratio
Digital Keystone Correction
Projection System
Projection Lens
Lens Throw Ratio
Projection Lamp
Scanning Frequency
Dot Clock
Color System
Computer Compatibility
Sound Output
Voltage
BTU Rating
dB Rating
Power Consumption
Dimensions (WxHxD)
Net Weight
User Maintenance
PC Input Terminals
Video Input Terminals
Output Terminals
Service Port Terminal
Mouse Control Port
Other Terminals
Included Accessories
Optional Accessories • 610 334 9565 – Replacement Lamp
• 645 093 6951 – Replacement Remote
• POA-CA-COMPVGA – VGA/Component Video Cable
• POA-RCKIT04 – Presentation Kit (Remote Control w/USB
Warranty
Because its products are subject to continuous improvement, SANYO reserves the right to
modify product design and specifications without notice and without incurring any obligations.
Remote Control
645 093 6951
XGA (1024 x 768)
3000 ANSI Lumens
85% (Corner to Center)
0.63" TFT p-Si x 3 w/Micro Lens
2,359,296 (786,432 x 3)
500:1
(Lamp Mode "Auto", Image Mode "Dynamic")
40" – 300"
4:3
3.6' – 43.0'
Manual
1:1.57
9:1
Vertical: +/- 20 w/Auto Keystone correction
Dichroic mirror & X prism system w/PBS
F1.6-2.5 / f0.70"-1.11"
1.38-2.17:1
220W UHP
H Sync: 15-100kHz, V Sync: 50-100Hz
140MHz
PAL/PAL-M/PAL-N/SECAM/NTSC/NTSC4.43
UXGA, WXGA, SXGA, XGA, SVGA, VGA, MAC
One-piece, 1-watt Mono
100-120 200-240V AC (auto Voltage) ; 50/60 Hz
938 / 665 (Eco mode)
29 dB (Eco mode)
275W / 195W (Eco mode)
13.2" x 3.1" x 9.4" (not including protrusion)
7.5 lbs
Clean air filters, replace lamp assembly
DVI-I x 1 (Digital with HDCP / Analog)
• D-sub15 x 1(In/Monitor out)
• Audio x 1 (Stereo mini-jack : common)
Composite Video (RCA x 1)• S-Video (Mini-DIN 4-pin)
• R & L/mono audio (RCA x 2)
• Component Video (D-Sub15 input w/optional cable)
• Audio for Component Video(stereo mini-jack)
D-Sub15 x 1 (switchable In/monitor out)
• Variable Audio (stereo mini-jack)
Mini DIN 8-pin
USB Type B x 1
• RJ45 for Wired LAN • SD Card Slot for Viewer
I/R Remote Control • 2 AAA Batteries
• Owner's Manual(CD-ROM & Quick Reference Guide)
• VGA Cable • Strap & Screw for Lens Cap • PIN Code
Label • AC Power Supply Cord • Lamp replace Label
Infrared Receiver)
Three years parts and labor; 90 days original lamp;
Quick Repair Program under warranty
Rear Back Panel
©2008 SANYO