Installing The Scsi Extender - HP D7171A - NetServer - LPr Manual

Chapter 2
Installing the SCSI Extender Tray
Do the following steps to install the SCSI Extender tray:
1. On the satellite chassis, locate the SCSI Extender slot at the bottom of the
satellite chassis board cage (Figure 2-9).
2. Hold the SCSI Extender by the corners of the tray, component side facing
up, and SCSI connectors facing you.
3. Being careful not to touch board components, ease the SCSI Extender tray
into the bottom slot and carefully push on the front of the SCSI Extender
tray to seat it snugly into the system board connectors.
Satellite
Chassis
SCSI Extender
Slot
14
SCSI Extender Tray
Figure 2-9. SCSI Extender Installation

Installing the SCSI Extender