Chapter 2
2. Plug the SCA extender into the Ultra3 drive.
3. Insert the two screws that hold the SCA extender in place, then tighten
snugly. Do not over tighten.
4. Insert the four screws that attach the Ultra3 drive to the hot-swap tray, then
tighten snugly. Do not over tighten.
2. SCA extender
plugs into drive
3. Two screws hold
SCA extender in place
4. Four screws attach the
drive to the tray
Figure 2-7. Ultra3 Drive and Tray Installation
10
Installation Procedure
1. Drive fits into tray