A Word About Security; Requirements - HP D7171A - NetServer - LPr User Manual

Chapter 1

A Word About Security

Once the server has been setup and enabled to receive these packets, you should
ensure that no one other than specified administrators can access the software used
to shut down or power cycle your servers. Do this by installing the AOL2 client
software only on designated, secure, password-protected, management consoles.
For the most protection, HP recommends that you only connect the LAN A port of
your HP NetServers to an isolated LAN dedicated to management tasks and only
available to authorized administrators.

Requirements

The HP NetServer Navigator CD-ROM version L.19.00, M.01.00 or above
l
(comes with the server)
At the NetServer:
Must be an HP NetServer LP1000r or LP2000r
l
The server must be running Windows Server; either NT 4.0 or 2000
l
The server's LAN A port must have a network connection and be
l
configured to enable power and WOL functions (HP recommends that the
network that you connect LAN A port to should be only accessible by
administrators)
A the management console:
Must be running either Windows 95, 98, 2000 or NT 4.0
l
Alert On LAN2 Features and Requirements
3