Download Print this page

HP D7171A - NetServer - LPr Configuration Manual page 2

With hp rack storage/12fc windows 2000 advanced server cluster
Hide thumbs Also See for D7171A - NetServer - LPr:

Advertisement

LANs:
Client LAN
Intra-cluster
(Heartbeat) LAN
Power source
System software:
Navigator version
Operating System
SPU
Model
Clock speed
No. of CPUs
BIOS version
CPU cache
RAM
No. of power supplies
Local storage
I/O slot
Default Boot Order
M/S Certified
Configuration
Storage
Local
Controller
Driver
Cabinets (Physical drive
location)
Disk drives
SCSI bus
SCSI Ids
Any NIC that is HP and Microsoft approved. See
For a SPOFless cluster, two D5013B NICs configured with AFT is
recommended.
Embedded NIC with crossover cable, or, configure as a VLAN through an
ethernet switch. See
Intra-cluster LAN
Direct from power mains, power conditioner or uninterruptible power
supply (UPS) using any power conditioner or UPS. Redundant power
distribution units (PDU's) are strongly recommended.
L.18.02 or later
Microsoft Windows 2000 Advanced Server
HP NetServer LH 3000
733, 800, 933 MHz
2
4.06.21 PT or later (733 MHz)
4.06.24 PT or later (800, 933 MHz)
Any size
256 MB minimum. Must be HP.
2 standard, 3 required for redundancy, 4 for power cord redundancy.
See
Local Storage
below.
Added cards may be installed in any appropriate slot, keeping in mind the
server's default boot order as listed below:
IDE CD-ROM, FDD, SE SCSI C, Embedded A, Embedded B, PCI-8,
PCI-7, PCI64-6, PCI64-5, PCI64-4, PCI64-3, PCI64-2, PCI64-1
M/S Certified Configuration:
P5 - Local Storage – NetRAID-1Si
P6 – Client LAN
P8 – Shared Storage- FC HBA
Booted from embedded DAC
May use embedded SCSI, embedded DAC, NetRAID-3Si or NetRAID-1Si.
For SPOFless, recommend embedded DAC with drives in RAID-1 mirror,
or another fault tolerant RAID level.
For embedded SCSI, use sym_hi.sys from Windows 2000 Adv. Server CD
version 5.00.2134.1 or later.
For embedded DAC and NetRAID-xSi, use mraid35x.sys version 2.62
(Navigator L.18.04.5 or later).
SPU internal drive bays or HP external drive cabinet (e.g., HP Rack
Storage/12), any number.
Must be HP (hot swap or fixed)
Any HP cables that meet SCSI specifications and any SCSI bus speed.
Any
2
Client LAN
below.
below.

Advertisement

loading