Hp netserver lc 3 technical reference label (1 page)
Summary of Contents for HP D7171A - NetServer - LPr
Page 1
Hewlett-Packard and Microsoft. This guide is prescriptive; it describes the configurations supported by HP. Any configuration not expressly allowed by this guide will not be supported by HP.
Model HP NetServer LX Pro Model 1 or HP NetServer LXe Pro Model 1 Clock speed 166 or 200 MHz. No. of CPUs 2 – 4 (at least 2 are required) BIOS version 1.00.08.CDOL or later CPU cache Any size 128 MB minimum.
Shared Storage Host Bus Adapter: Model A5246A HP Fibre Channel Adapter Kit for NT No. of HBA 1 – 2. (See Shared Storage Configurations.) Driver 2.xx SPU I/O slot P4 (1 HBA) and P5 (2 HBA) Disk Array Controller: Model SP630/FC Storage Processor (ordered with A3661B or A3662B) No.
Page 4
Shared Storage Configurations Configurations: Basic See "Basic Configuration Cabling Diagrams with Single or Cascaded Hubs." Redundant See "Redundant Configuration Cabling Diagrams with Single or Cascaded Hubs." Fibre Channel Hubs: Model A3724A HP 10-port Short Wave Fibre Channel (FC) Hub A4839A HP 10-port Long Wave FC Hub No.
Page 5
See Shared Storage Cables for a list of cables that can be connected to the Short Wave Ports of the hub. Port connections to this hub are for example only. You can use any port, except for port 10 on Long Wave Hubs. The remaining ports can be used for connection of additional Disk Arrays.
Page 6
See Shared Storage Cables for a list of cables that can be connected to the Short Wave Ports of the hub. See Shared Storage Cables for a list of cables that can be Port connections to connected between these hubs are for hubs.
Page 7
See Shared Storage Cables for a list of cables that can be connected to the Short Wave Ports of the hub. Port connections to these hubs are for example only. You can use any port, except for port 10 on Long Wave Hubs.
Page 8
See Shared Storage Cables for a list of cables that can be connected to the Short Wave Ports of the hub. See Shared Storage Cables for a list of cables that can be connected Port connections to between hubs. these hubs are for Port 10 is used example only.