Connect Cables; Troubleshooting - HP D7171A - NetServer - LPr Installation Manual

9
Replace All Covers and

Connect Cables

1. Reassemble the HP NetServer.
Verify that the Processor Cooling Duct Cover is properly closed.
2. Replace all covers.
3. Connect the power cord and all other cables.
NOTE Even at low room temperatures, all covers and panels
must be in place to provide controlled airflow for system
reliability.
10
Configure the HP NetServer and
Install Additional ISA Boards
WARNING Do not install ISA boards until instructed to
1. Turn on the HP NetServer and monitor.
2. If the HP NetServer Navigator CD-ROM is not currently loaded, insert it into the CD-ROM drive and press the Reset
button on the front of the server. The HP NetServer automatically boots from the HP NetServer Navigator CD-ROM.
If a message requiring a user action appears, press the
3. Go to the HP NetServer Navigator Main Menu and select "Configuration Assistant."
4. If you have installed all accessories except ISA boards, go to the Express Configuration Menu and follow the on-screen
instructions to configure your HP NetServer.
NOTE
button. Follow the on-screen instructions to configure the HP NetServer. Repeat the process for each
accessory installed.
11

Troubleshooting

The following are tools available for troubleshooting HP NetServer installation.
HP NetServer LX Pro Series User Guide
Contains information on the following:
Troubleshooting
How to access Information Assistant
Warranty and service and support phone numbers
HP NetServer Navigator CD-ROM:
HP NetServer Information Assistant
Part Information
List of Error Messages and Beep Error Messages
Problem solving processes
Complete installation, management and service information
NetServer Utilities:
HP Diagnostic Assistant Utility: An easy-to-use hardware diagnostic for system verification, burn-in, and rapid
troubleshooting.
pouch. The utility is also available in a NetServer utilities module on the HP NetServer Navigator CD-ROM.
Print or View Configuration
detected in the system and the resources that are allocated to each.
Diskette Library
example, you can create the following diskettes: BIOS Update, EISA Configuration, NOS Drivers, NetServer Assistant, PowerWise
Assistant, Diagnostic Assistant and Remote Assistant Upgrade.
Error Message Utility
handle the errors.
Event Log Report Utility
do so by the Configuration Assistant.
If you are installing one accessory at a time, go to the Custom Configuration Menu and select the Help
The Diagnostic Assistant is also located on a flexible disk mounted inside your HP NetServer cabinet in a plastic
: Enables you to print or view the current system configuration, including details about the boards that are
: Enables you to conveniently generate any flexible diskette available on the NetServer Navigator CD-ROM. For
: Lets you view descriptions of errors that occur during the Power-On Self Test (POST) and tells you how to
: Describes server management events and lets you review a list of errors and other system events.
Product Reference Label:
System Reliability Description
Esc key and continue.
Processor Cooling Duct Cover
Service Reference Label
(beneath top cover)
Front Skirt