User Manual SyncMaster S27A850D The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. BN46-00082C-01...
Table Of Contents BEFORE USING THE Copyright PRODUCT Icons used in this manual Symbols for safety precautions Cleaning Cleaning Securing the Installation Space Precautions for storage Safety Precautions Electricity and Safety Installation Operation Correct posture to use the product PREPARATIONS Checking the Contents Removing the Packaging Checking the Components...
Page 3
Connecting the Product to a PC as a USB HUB Connecting a PC to the Product Utilizing the Product as a USB HUB Connecting the Power SCREEN SETUP MAGIC SAMSUNG MAGIC Bright SAMSUNG MAGIC Color Brightness Configuring Brightness Contrast Configuring Contrast Sharpness...
Page 4
Table Of Contents Gamma Configuring Gamma RESIZING OR RELOCATING THE Mode Contrast SCREEN Image Size Changing the Picture Size H-Position & V-Position Configuring H-Position or V-Position SETUP AND RESET Eco Motion Sensor Eco Light Sensor Eco Saving Eco Icon Display Menu Transparency Changing Menu Transparency Language...
Page 5
Initializing Settings (Reset) INFORMATION MENU AND INFORMATION OTHERS Displaying INFORMATION Configuring Brightness in the Startup Screen TROUBLESHOOTING Requirements Before Contacting Samsung Customer Service Center GUIDE Testing the Product Checking the Resolution and Frequency Check the followings. Q & A SPECIFICATIONS General PowerSaver...
Page 6
Table Of Contents Terminology INDEX Table Of Contents...
ⓒ 2012 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics.
Before Using the Product Icons used in this manual The following images are for reference only. Real-life situations may differ from what is shown in the images. Symbols for safety precautions A serious or fatal injury may result if instructions are not followed. Warning Personal injury or damage to properties may result if instructions are Caution...
Before Using the Product Cleaning Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. 1. Power off the monitor and computer. 2. Disconnect the power cord from the monitor. Hold the power cable by the plug and do not touch the cable with wet hands.
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby. Be sure to contact Samsung Customer Service Center (82page) if the inside of the monitor needs cleaning. (service fee will be charged). Before Using the Product...
Before Using the Product Safety Precautions Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged power cord or plug, or a loose power socket. An electric shock or fire may result.
The product may become damaged by an electric shock. Do not use the power cord for products other than authorized products supplied by Samsung. An electric shock or fire may result. Keep the power socket where the power cord is connected unobstructed.
Page 13
Before Using the Product Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.). The product may fall and break or cause a personal injury. Using the product in an area with excess vibration may damage the product or cause a fire.
Be sure to consult Samsung Customer Service Center (82page) before installation if you want to install the product at such a place.
Page 15
Before Using the Product During a lightning or thunderstorm, power off the product and remove the power cable. An electric shock or fire may result. Do not drop objects on the product or apply impact. An electric shock or fire may result. Do not move the product by pulling the power cord or any cable.
Page 16
(paper, match, etc.) into the vent or ports of the product. If water or any foreign substance enters the product, be sure to power off the product, remove the power cord, and contact Samsung Customer Service Center (82page). Product failure, an electric shock or fire may result.
Page 17
Before Using the Product Do not let water enter the DC power device or get the device wet. An electric shock or fire may result. Avoid using the product outdoors where it can be exposed to rain or snow. Be careful not to get the DC power adapter wet when you wash the floor. Do not put the DC power adapter near to any heating apparatus.
Before Using the Product Exercise caution when adjusting the product angle or stand height. Otherwise, children's fingers or hands may become stuck and injured. Tilting the product excessively may cause it to fall and result in personal injury. Do not place heavy objects on the product. Product failure or personal injure may result.
Preparations Checking the Contents 1.1.1 Removing the Packaging Open the packaging box. Be careful not to damage the product when you open the packaging with a sharp instrument. Remove the Styrofoam from the product. Check the components and remove the Styrofoam and plastic bag. The appearance of actual components may differ from the image shown.
Preparations 1.1.2 Checking the Components Contact the dealer from whom you purchased the product if any item is missing. The appearance of the components and items sold separately may differ from the image shown. Components Quick Setup Guide Warranty Card User Manual (Not available in all locations) Power cable...
Preparations Parts 1.2.1 Frontal Buttons The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Icons Description Open or close the onscreen display (OSD) menu, or return to the last menu.
Page 22
Preparations Icons Description Configure Customized Key and press [ ]. The following options will be enabled. MAGIC Image Size To configure Customized Key, go to SETUP&RESET Customized Key and select the mode you want. Adjust the screen brightness. Volume can be adjusted if a cable is connected to the [DP IN] or [AUDIO IN] port.
Preparations 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Description Connects to the DC power adapter. Connects to a PC via a DVI cable. Connects to a PC via a DP cable.
Preparations Installation 1.3.1 Attaching the Stand Place a protective cloth or Insert the stand base into the Do not remove the fixing pin until cushion on a flat surface. Next, stand in the direction of the you are finished attaching the place the product with the face arrow.
Preparations 1.3.2 Adjusting the Product Tilt and Height The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. To adjust the height, remove the fixing pin. The monitor tilt and height can be adjusted. Hold the top center of the product and adjust the height carefully.
Preparations 1.3.4 Installing a Wall-mount Kit or Desktop Stand Before Installation Power the product off and remove the power cable from the power socket. Place a protective cloth or Unfasten the screw from the Lift and detach the stand. cushion on a flat surface. Next, back of the product.
Samsung shall not be held liable for any product damage or personal injury caused by using a wall- mount kit other than the one specified or from an attempt to install the wall-mount kit on your own.
Preparations "MagicRotation Auto" The "MagicRotation Auto" function detects the rotation of monitors that are fitted with a rotation sensor and rotates the Windows screen accordingly. [Software Installation] Insert the user manual CD provided with the product into the CD-ROM drive. Follow the instructions given on the screen to proceed with installation.
Connecting and Using a Source Device Before Connecting 2.1.1 Pre-connection Checkpoints Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device. Do not connect the power cable until all connections are completed. Connecting the power cable during connection may damage the product.
Connecting and Using a Source Device Connecting and Using a PC 2.2.1 Connecting to a PC Select a connection method suitable for your PC. Connecting parts may differ in different products. Connection using a Dual-link DVI cable (digital type) DVI IN Connect the DVI cable to the [DVI IN] port on the back of the product and the DVI port on the PC.
An installation driver is contained on the CD supplied with the product. If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com) and download the file. Insert the user manual CD provided with the product into the CD-ROM drive.
Connecting and Using a Source Device 2.2.3 Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language and change the resolution to the optimum value. The optimal resolution for this monitor is as follows: 2560 x 1440 60Hz Follow the above settings to set the resolution.
Connecting and Using a Source Device 2.2.4 Changing the Resolution Using a PC Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. Changing the Resolution on Windows XP Go to Control Panel Display...
Page 34
Connecting and Using a Source Device Changing the Resolution on Windows Vista Go to Control Panel Personalization Display Settings and change the resolution. 2 Connecting and Using a Source Device...
Page 35
Connecting and Using a Source Device Changing the Resolution on Windows 7 Go to Control Panel Display Screen Resolution and change the resolution. 2 Connecting and Using a Source Device...
Connecting and Using a Source Device Connecting Headphones AUDIO IN Connect the stereo cable to the [AUDIO IN] port on the back of the product and the AUDIO OUT port on the PC. If the stereo cable is connected, the Volume can be adjusted using the [ ] buttons on the front...
Connecting and Using a Source Device Connecting the Product to a PC as a USB HUB 2.4.1 Connecting a PC to the Product The product can function as a HUB by connecting to a PC via a USB cable. You can connect a source device directly to the product and control the device from the product, without having to connect the device to the PC.
Connecting and Using a Source Device Connecting the Power Put the DC power adapter in the groove, with the switch facing upward. - Push the adapter until you hear a “click.” Connect the power cable to the DC power adapter. Next, connect the DC power adapter to the product.
Configure the screen settings such as brightness and color tone. MAGIC This feature optimizes the brightness and colors according to how the product will be used. 3.1.1 SAMSUNG MAGIC Bright This menu provides an optimum picture quality suitable for the environment where the product will be used.
Page 40
Screen Setup 3.1.2 SAMSUNG MAGIC Color Color is a new picture-quality improvement technology developed independently by Samsung, which delivers vivid natural colors without picture quality degradation. This menu is not available when Bright is in Cinema Dynamic Contrast mode. This menu is not available when is set to On.
Screen Setup Brightness Adjust the general brightness of the picture. (Range: 0~100) A higher value will make the picture appear brighter. This menu is not available when Bright is set to Dynamic Contrast mode. This menu is not available when Eco Light Sensor Eco Saving is set to On.
Screen Setup Contrast Adjust the contrast between the objects and background. (Range: 0~100) A higher value will increase the contrast to make the object appear clearer. This menu is not available when Bright is in Cinema Dynamic Contrast mode. This menu is not available when Color is in Full...
Screen Setup Sharpness Make the outline of objects more clear or blurry. (Range: 0~100) A higher value will make the outline of objects clearer. This menu is not available when Bright is in Cinema Dynamic Contrast mode. This menu is not available when Color is in Full...
Screen Setup Response Time Accelerate the panel response rate to make video appear more vivid and natural. It is best to set Response Time Normal Faster when you are not viewing a movie. The functions available on the monitor may vary depending on the model. Refer to the actual product.
Configuring Tint Adjust the tint of the screen. This menu is not available when Bright is set to Cinema Dynamic Contrast mode. Adjust the value of the color red in the picture. (Range: 0~100) A higher value will increase the intensity of the color. This menu is not available when Color is in...
Configuring Tint Green Adjust the value of the color green in the picture. (Range: 0~100) A higher value will increase the intensity of the color. This menu is not available when Color is in Full Intelligent mode. This menu is not available when is set to On.
Configuring Tint Blue Adjust the value of the color blue in the picture. (Range: 0~100) A higher value will increase the intensity of the color. This menu is not available when Color is in Full Intelligent mode. This menu is not available when is set to On.
Configuring Tint Color Tone Adjust the general color tone of the picture. This menu is not available when Color is in Full Intelligent mode. This menu is not available when is set to On. 4.4.1 Configuring the Color Tone Settings Press [ ] on the product.
Configuring Tint Gamma Adjust the mid-range brightness (Gamma) of the picture. This menu is not available when is set to On. 4.5.1 Configuring Gamma Press [ ] on the product. Press [ ] to move to COLOR and press [ ] on the product.
Resizing or Relocating the Screen The PBP (Picture by Picture) function separates the screen in half displaying output from two different source devices simultaneously on the left and right sides of the screen. Compatible with Windows 7 only. 5.1.1 Mode Press [ ] on the product.
Resizing or Relocating the Screen The PBP function may not be available depending on the specifications of the graphics card used. If the screen is blank in PBP mode when the optimum resolution (1280 x 1440) is selected, go to Control Panel Display Screen Resolution and click Detect on the PC.
Resizing or Relocating the Screen Image Size Change the picture size. This menu is not available when is set to On. 5.2.1 Changing the Picture Size Press [ ] on the product. Press [ ] to move to SIZE&POSITION and press [ ] on the product.
Resizing or Relocating the Screen H-Position & V-Position H-Position: Move the screen to the left or right. V-Position: Move the screen up or down. This menu is only available when Image Size is set to Screen Fit. This menu is not available when is set to On.
Setup and Reset Eco Motion Sensor, Eco Light Sensor, and Eco Saving options are displayed on the same menu page so that you can conveniently configure the power saving settings. 6.1.1 Eco Motion Sensor Eco Motion Sensor activates to save power when it does not detect any movement within a specified area for a specified period of time.
Page 55
Setup and Reset The selected option will be applied. Configuring Backlight Press [ ] on the product. Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to and press [ ] on the product.
Setup and Reset 6.1.2 Eco Light Sensor Eco Light Sensor feature optimizes the view condition and contributes to power saving by adjusting the screen brightness depending on the ambient light intensity. This menu is not available when Bright is set to Dynamic Contrast mode.
Page 57
Setup and Reset Configuring Sensitivity Press [ ] on the product. Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to and press [ ] on the product. Press [ ] to move to Sensitivity and press [...
Page 58
Setup and Reset Configuring Brightness Level Press [ ] on the product. Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to and press [ ] on the product. Press [ ] to move to Brightness Level and press [...
Setup and Reset 6.1.3 Eco Saving Eco Saving function reduces power consumption by controlling the electric current used by the monitor panel. This menu is not available when Bright is set to Dynamic Contrast mode. This menu is not available when Eco Light Sensor is set.
Setup and Reset 6.1.4 Eco Icon Display Configuring Eco Icon Display Press [ ] on the product. Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to and press [ ] on the product.
Page 61
Setup and Reset bar level will decrease with a moon image displayed. The brightness slide bar will be displayed for 3 seconds after the sensor activates. You've saved * tree(s). A pop-up as shown above will appear when an energy tree completes while Eco Icon Display is On.
Setup and Reset Menu Transparency Set the transparency for the menu windows: 6.2.1 Changing Menu Transparency Press [ ] on the product. Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to Menu Transparency and press [ ] on the product.
Setup and Reset Language Set the menu language. A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions on your PC. 6.3.1 Changing the Language Press [ ] on the product.
Setup and Reset PC/AV Mode PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie. This menu is not available when is set to On. 6.4.1 Configuring PC/AV Mode Press [ ] on the product.
Setup and Reset Auto Source Activate Auto Source. This menu is not available when is set to On. 6.5.1 Configuring Auto Source Press [ ] on the product. Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to Auto Source...
Setup and Reset Display Time Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified period of time. Display Time can be used to specify the time after which you want the OSD menu to disappear. 6.6.1 Configuring Display Time Press [ ] on the product.
Setup and Reset Key Repeat Time Control the response rate of a button when the button is pressed. 6.7.1 Configuring Key Repeat Time Press [ ] on the product. Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to Key Repeat Time...
Setup and Reset Customized Key You can set Customized Key to the mode you want as follows. This menu is not available when is set to On. 6.8.1 Configuring Customized Key Press [ ] on the product. Press [ ] to move to SETUP&RESET and press [ ] on the product.
Setup and Reset Off Timer On/Off Enable or disable the off timer that automatically powers off the product. 6.9.1 Configuring Off Timer On/Off Press [ ] on the product. Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to Off Timer On/Off...
Setup and Reset 6.10 Off Timer Setting The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number of hours. This menu is only available when Off Timer On/Off is set to On.
Setup and Reset 6.11 Reset Return all the settings for the product to the default factory settings. This menu is not available when is set to On. 6.11.1 Initializing Settings (Reset) Press [ ] on the product. Press [ ] to move to SETUP&RESET and press [ ] on the product.
INFORMATION Menu and Others INFORMATION View the current input source, frequency and resolution. 7.1.1 Displaying INFORMATION Press [ ] on the product. Press [ ] to move to INFORMATION. The current input source, frequency and resolution will appear. PICTURE COLOR SIZE&POSITION SETUP&RESET INFORMATION...
Requirements Before Contacting Samsung Customer Service Center 8.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check if your product is operating normally by using the product test function.
Page 74
Troubleshooting Guide Screen issue Not Optimum Mode is displayed. This message appears if the signal from the graphics card exceeds the maximum resolution or frequency for the product. Change the maximum resolution and frequency to suit the product performance, referring to Standard Signal Mode Table (80page).
Page 75
Troubleshooting Guide Source device issue A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is booting, have your PC serviced. 8 Troubleshooting Guide...
Page 76
Troubleshooting Guide Q & A Question Answer How can I change the Set the frequency on your graphics card. frequency? Windows XP: Select Control Panel Appearance and Themes Display Settings Advanced Monitor, and adjust Refresh rate under Monitor settings. Windows ME/2000: Select Control Panel Display Settings Advanced...
Page 77
Troubleshooting Guide Question Answer How can I change the Windows XP: Go to Control Panel Appearance and Themes resolution? Display Settings and adjust the resolution. Windows ME/2000: Go to Control Panel Display Settings and adjust the resolution. Windows Vista: Go to Control Panel Appearance and Personalization Personalize...
Specifications General Model Name S27A850D Size 27 inches (68 cm) Panel Display area 596.74mm(H) x 335.66mm(V) Horizontal 31~90 kHz Frequency Synchronization Vertical 56~76 Hz Frequency Display Color 16.7 M (True 8 bit) Optimum 2560 x 1440 @ 60 Hz resolution Resolution Maximum 2560 x 1440 @ 60 Hz...
Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.com/recyclingdirect or call, (877) 278 - 0799 PowerSaver The power-saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used for a specified period of time.
Specifications Standard Signal Mode Table This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality.
Page 81
Specifications Horizontal Vertical Pixel Clock Sync Polarity Resolution Frequency Frequency (MHz) (H/V) (kHz) (Hz) VESA,1600 x 1200 75.000 60.000 162.000 VESA,1680 x 1050 65.290 59.954 146.250 VESA,1920 x 1200 74.556 59.885 193.250 VESA, 2560 x 1440(RB) 88.787 59.951 241.500 Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle.
Appendix Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca (English) http://www.samsung.com/ca_fr (French) MEXICO 01-800-SAMSUNG (726-7864) http://www.samsung.com...
Page 83
(Dutch) http://www.samsung.com/be_fr (French) BOSNIA 05 133 1999 http://www.samsung.com BULGARIA 07001 33 11 , normal tariff http://www.samsung.com CROATIA 062 SAMSUNG (062 726 7864) http://www.samsung.com CYPRUS 8009 4000 only from landline http://www.samsung.com (+30) 210 6897691 from mobile and land line Appendix...
. use of supplies or separatly sold product unspecified by Samsung. repair from a person besides an engineer of outsourcing service company or partner of Samsung Electronics Co., Ltd. remodeling or repairing the product by customer.
Page 89
Appendix If customer requests a service in case the product has no defect, service fee may be charged. So please read User Manual first. Appendix...
Appendix Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Page 91
Appendix Terminology OSD(On Screen Display) On screen display (OSD) allows you to configure on-screen settings to optimize the picture quality as required. It allows you to change the screen brightness, tint, size and many other settings using menus displayed on the screen. HUB refers to a device that is a common connection point for multiple devices connected over a network.
Page 92
Appendix Vertical Frequency One image is made of numerous horizontal lines. The vertical frequency is measured in Hz and represents how many images can be created per second by those horizontal lines. A vertical frequency of 60 means that an image is transmitted 60 times per second. The vertical frequency is also called "refresh rate"...
Page 93
Correct Disposal of This Product (Waste Off Timer Setting Electrical & Electronic Equipment) Correct posture to use the product Customized Key Parts PC/AV Mode Display Time PowerSaver Q & A Gamma General Requirements Before Contacting Samsung Green Customer Service Center Reset Response Time Index...
Page 94
Index Safety Precautions Sharpness Standard Signal Mode Table Terminology Utilizing the Product as a USB HUB Index...