What To Do If; Installation - AEG 30006VE User Manual

24

What to do if...

Put a cloth on the bottom of the oven for protection of the oven light and glass cover.
Replacing the oven light bulb/cleaning the glass cover
1. Turn the glass cover anti-clockwise to remove it.
2. Clean the glass cover.
3. Replace the oven light bulb with applicable 300°C heat-resistant oven light bulb.
4. Install the glass cover.
WHAT TO DO IF...
Problem
The residual heat indicators
does not come on
The appliance does not operate
The oven does not heat up
The oven does not heat up
The oven lamp does not oper-
ate
Steam and condensation settle
on the food and in the oven
cavity
If you cannot find a solution to the problem yourself, contact your dealer or the service
centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the
front frame of the oven cavity.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

INSTALLATION

First read "Safety information" chapter carefully.
Possible cause
The cooking zone is not hot be-
cause it operated only for a
short time
The fuse in the fuse box is re-
leased
The oven is not switched on
The necessary settings are not
set
The oven lamp is defective
You left the dish in the oven
for too long
Remedy
If the cooking zone must be
hot, speak to the after sales
service
Control the fuse. If the fuse is
released more than one time,
refer to a qualified electrician.
Switch on the oven
Control the settings
Replace the oven lamp
Do not leave the dishes in the
oven for longer than 15-20 mi-
nutes after the cooking process
ends
.........................................
.........................................
.........................................