D-Link DCS-100 User Manual page 15

Section 2 - Installation
17. Enter the following Network information for your camera:
• Name - Enter a name for your camera.
• IP Address - Enter the IP address of the camera.
If you want to use a domain name, then check
the DNS box and enter the domain name of the
camera.
• HTTP Port - 80 is the default port.
• User Name - Enter the user name for the camera.
• Password - Enter the password for the camera.
• Protocol - Select TCP, UDP, or HTTP.
Enter the following Device information for your camera:
• Auto Detect - Click the Auto Detect button to detect
the vender and model information.
• Vendor - Select the brand name/vendor from the
drop-down menu.
• Camera Model - Select the camera model from the
drop-down menu.
• Video Channel - Select the video channel you want
to assign the camera to.
18. Click OK to add your camera.
D-Link D-ViewCam User Manual 15