Viewing Filtering Statistics and Configuration
•
•
•
•
•
Viewing Filtering Server Statistics
To show information about the filtering server, enter the following command:
hostname# show running-config url-server
The following is sample output from the show running-config url-server command:
hostname# show running-config url-server
url-server (outside) vendor n2h2 host 128.107.254.202 port 4005 timeout 5 protocol TCP
To show information about the filtering server or to show statistics, enter the following command:
hostname# show url-server statistics
The following is sample output from the show url-server statistics command, which shows filtering
statistics:
hostname# show url-server statistics
URL Server Statistics:
----------------------
Vendor
URLs total/allowed/denied
HTTPSs total/allowed/denied
FTPs total/allowed/denied
URL Server Status:
------------------
10.130.28.18
URL Packets Sent and Received Stats:
-----------------------------------
Message
STATUS_REQUEST
LOOKUP_REQUEST
LOG_REQUEST
-----------------------------------
Viewing Buffer Configuration and Statistics
The show running-config url-block command displays the number of packets held in the url-block
buffer and the number (if any) dropped due to exceeding the buffer limit or retransmission.
The following is sample output from the show running-config url-block command:
hostname# show running-config url-block
This shows the configuration of the URL block buffer.
Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM
18-10
Viewing Filtering Server Statistics, page 18-10
Viewing Buffer Configuration and Statistics, page 18-10
Viewing Caching Statistics, page 18-11
Viewing Filtering Performance Statistics, page 18-11
Viewing Filtering Configuration, page 18-11
UP
Sent
65155
0
0
url-block url-mempool 128
url-block url-size 4
url-block block 128
websense
50/35/15
1/1/0
3/1/2
Received
34773
0
NA
Chapter 18
Applying Filtering Services
OL-20748-01