System Board - HP 1105 Maintenance And Service Manual

System Board

Description
System board
The system board is secured with nine screws.
To remove the system board:
1. Prepare the computer for disassembly (see
on page
2. Remove the rear cover (see
3. Remove the system board cover (see
4. Remove the memory module (see
5. Remove the WLAN module (see
6. Disconnect all cables from the system board, noting their location for reinstallation.
7. Remove the nine screws (circled in image) that secure the system board to the computer.
8. Lift the system board straight up and out of the computer.
To install the system board, reverse the removal procedures.
37).
Rear Cover on page
Preparing to Disassemble the Computer
38).
System Board Cover on page
Memory on page 45).
WLAN Module on page
Spare part number
669973-001
69).
47).
System Board 73