Desktop Computer - Dell GX280DT - GX280 Desktop Computer Setup Manual

7. Close the computer cover.
8. Attach the computer stand (optional).
NOTICE: To connect a network cable, first plug the cable into the network wall jack, and then plug it into the computer.
9. Connect the monitor cable to the card's video connector.
10. Connect your computer and devices to their electrical outlets, and turn them on.

Desktop Computer

With a Card Cage
1. Open the computer cover.
2. Remove the card cage:
a. Check any cables that are connected to cards through the back-panel openings. Disconnect any cables that will not reach the card cage once
they are removed from the computer.
b. Gently rotate and pull on the handle to lift the card cage away from the computer.
Removing the Card Cage
1 card cage
2 handle
3. Remove the filler bracket to create an empty card-slot opening in the card cage:
a. Press the release tab at the top of the card cage.
b. Rotate the card retention lever upward to unlock and lift the filler bracket.
Removing the Card-Cage Filler Bracket