Front-Panel Inserts
If you are installing a new floppy or CD/DVD drive instead of replacing a drive, remove the front-panel inserts:
1. Facing the front of the computer, use your fingers to remove the front-panel cover.
2. Press on the inserts until they pop free of the front-panel cover.
Floppy Drive
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.
1. Follow the procedures in
"Before You
2. If you are installing a new floppy drive rather than replacing a drive,
Removing a Floppy Drive
1. Disconnect the data cable from the CD/DVD drive bay located above the floppy drive.
2. Disconnect the power and floppy-drive cables from the back of the floppy drive.
3. Disconnect the floppy-drive cable from the connector labeled DSKT on the
Begin."
remove the front-panel
inserts.
system
board.