Related Manuals for Epson C31C391A8791 - TM U230P Two-color Dot-matrix Printer
Summary of Contents for Epson C31C391A8791 - TM U230P Two-color Dot-matrix Printer
- Page 1 EPSON OPOS ADK MANUAL APPLICATION DEVELOPMENT GUIDE POSPrinter (TM-U230) Version 2.61 Feb. 2008...
- Page 2 (3) Comments and notification of any mistakes in this documentation are gratefully accepted. (4) This software cannot be used with other equipment that the specified. (5) EPSON will not be responsible for any consequences resulting from the use of any information in this documentation. Trademarks Microsoft®, Windows®, Windows Vista™, Visual Basic®...
-
Page 3: Table Of Contents
Version 2.61 Feb. 2008 Contents SECTION 1. INTRODUCTION ..................1 SECTION 2. DETAILS ON SETTINGS .................2 2.1 References of Firmware Versions ................2 2.2 Settings of DIP Switches ....................2 2.3 Port Information......................4 2.4 Device Settings ......................6 2.4.1 Usable Device Specific Settings ................6 SECTION 3. -
Page 4: Section 1. Introduction
Throughout the manual, the various model names will be referred to as TM-U230. Compatibility mode The compatibility mode for upward compatibility was added in OPOS Ver2.60. For the details of the compatibility mode, please refer to “EPSON OPOS ADK MANUAL APPLICATION DEVELOPMENT GUIDE Compatibility Mode”. APPLICATION DEVELOPMENT GUIDE... -
Page 5: Section 2. Details On Settings
Version 2.61 Feb. 2008 Section 2. Details on Settings This section describes connection configurations and how to make the settings for the TM-U230 printers. 2.1 References of Firmware Versions Refer to the release notes (Relnote.txt). 2.2 Settings of DIP Switches Confirm that the following settings have been made correctly. - Page 6 Version 2.61 Feb. 2008 2) Parallel Port DIP-SW1 DIP-SW2 Setting Setting Recommended Fixed at OFF Recommended Fixed at ON Fixed at OFF Fixed at OFF Fixed at OFF Fixed at ON Fixed at OFF Settable Fixed at OFF Fixed at OFF Fixed at OFF Fixed at OFF Recommended...
-
Page 7: Port Information
Version 2.61 Feb. 2008 buzzer) to match the environment of use. Make other settings in accordance with the settings described above. 4) Ethernet Port DIP-SW1 DIP-SW2 Setting Setting Recommended Fixed at OFF Recommended Fixed at ON Fixed at OFF Fixed at OFF Fixed at OFF Fixed at ON Fixed at OFF... - Page 8 Version 2.61 Feb. 2008 The default settings are as shown in the following table. Item Setting range Baud rate [bps] 9600 Bit length [bit] Parity NONE Stop bit [bit] Handshake DTR/DSR Output buffer length [byte] 1024 Output interval time [ms] 2500 2) Port information when using parallel port The port information that can be set with the SetupPOS utility is as follows.
-
Page 9: Device Settings
The following explanation is about the settings for TM-U230. 2.4.1 Usable Device Specific Settings For the TM-U230, the following device specific settings are settable by the SetupPOS utility. For the detail, please refer to the Section 2 of “EPSON OPOS ADK MANUAL APPLICATION DEVELOPMENT GUIDE POSPrinter (TM Series)”. -
Page 10: Section 3. Function Details
Version 2.61 Feb. 2008 Section 3. Function Details This section describes the functions of the TM-U230 printers in details. Supplementary explanation of the parts not described in detail in the "UPOS" is also given here. 3.1 Property Set Values and Default Values The following explanation is about the property set values and the default values. - Page 11 Version 2.61 Feb. 2008 CapRecUnderline TRUE CapRecStamp FALSE CapRecRotate180 TRUE CapRecRight90 FALSE CapRecPapercut TRUE CapRecNearEndSensor TRUE CapRecMarkFeed CapRecLeft90 FALSE CapRecItalic FALSE CapRecEmptySensor TRUE CapRecDwideDhigh TRUE CapRecDwide TRUE CapRecDhigh TRUE CapRecColor PTR_COLOR_PRIMARY PTR_COLOR_CUSTOM1 CapRecCartridgeSensor CapRecBold TRUE CapRecBitmap TRUE CapRecBarCode FALSE CapRec2Color TRUE CapRecPresent TRUE...
-
Page 12: List Properties
Version 2.61 Feb. 2008 CapSlpBold FALSE CapSlpBitmap FALSE CapSlpBarCode FALSE CapSlp2Color FALSE CapSlpFullslip FALSE CapSlpPresent FALSE CapSlpPageMode FALSE If Multilingual character model, “PTR_CCS_KANJI” is set. 3.1.2 List Properties The List Properties are explained in the following. List Property Settings CharacterSetList “254,255,437,850,858,860,863,865,998”... -
Page 13: Width And Height Properties
When the RecLineSpacing is “0”, the RecLinesToPaperCut is “–1”. 3.1.4 Common Property Strings The Device information properties are described below. DeviceName DeviceDescription TM-U230 EPSON TM-U230 POS Printer TM-U230M EPSON TM-U230M POS Printer TM-U230P EPSON TM-U230P POS Printer TM-U230PM EPSON TM-U230PM POS Printer... -
Page 14: Methods
Version 2.61 Feb. 2008 TM-U230ME EPSON TM-U230ME POS Printer I/F indicate the connected interface. The following is the list of the four connecting interfaces. S: Serial P: Parallel U: USB E: Ethernet 3.2 Methods The following explanation is about supported/unsupported Methods, and the detailed information. -
Page 15: Escape Sequences
Version 2.61 Feb. 2008 3.3 Escape Sequences The following figure is about supported/unsupported Escape Sequences. Escape Sequence Receipt 0~100 0~100 0~9999 0~ approx. 50cm #rF Maximum [inch] 0~65535 !rvC !tbC !tpC O: Supported X : Unsupported Numbers: Settable range APPLICATION DEVELOPMENT GUIDE POSPrinter (TM-U230) -
Page 16: Power Condition Reports
3.8 Printable Bitmap Types and Sizes The TM-U230 models support the following bitmap commands. For the detail, please refer to the Section 3 of “EPSON OPOS ADK MANUAL APPLICATION DEVELOPMENT GUIDE POSPrinter (TM Series)”. The allowance ranges for bitmaps are as follows. -
Page 17: Automatic Recovery Function
Version 2.61 Feb. 2008 3.9 Automatic Recovery Function The TM-U230 models feature a function for automatic recovery when the power is turned on again after an interruption of power. Recovery processing is performed automatically when the printer’s power is turned on again after an interruption. -
Page 18: Section 4. Warnings
Version 2.61 Feb. 2008 Section 4. Warnings This section describes precautions in use of the TM-U230. There is no specific warning. APPLICATION DEVELOPMENT GUIDE POSPrinter (TM-U230)