Labeling Channels - Toshiba 19C100UM Owner's Manual

To block channels in the channel memory:
You can block specific channels. You will not be
able to tune blocked channels unless you unlock
them.
1
From the Channel Options menu, press
to move to the channel lock list.
2
Press
be locked and then press
digit PIN code. A tick will appear in the box.
To remove the tick, press
3
To save the setting, press
To manually add digital subchannels on a
physical channel:
Use the Channel Numbers and the Dash (
the remote control to enter the channel number
(for example, 56–1).
If the channel is found, the number will be added
to the list.
If the channel is not found, a message will appear.
To remove encrypted channels from the
channel memory:
If an encrypted channel is accidentally added to
the channel list by programming channels, you can
remove the unwanted encrypted (non-viewable)
channel while you are channel surfing. When you
tunes to an encrypted channel, the following
message will appear.
Digital Channel Is Encrypted - Press 1 on remote to remove channel
Press while the message is on the screen to
1
remove the unnecessary channel from the channel
list.
30
Downloaded from www.Manualslib.com
Chapter 5: Setting up your TV
or to select a channel position to
. Enter your four-
again.
.
manuals search engine

Labeling channels

A list of common channel labels (logos) for
various channels (ABC, CBS, etc.) will be
programmed into the TV. You will be able to view
and assign these logos from the Channel Labeling
window. If the desired channel label is not
provided in the list, you will be able to manually
enter/edit labels using the software keyboard.
To assign channel labels:
1
From the Preferences menu, press
to select Channel Labeling and then press
.
The Channel Labeling window opens.
2
Press or
to label.
3
Press
channel label and then press
4
Repeat steps 2 and 3 for other channels.
5 To save your settings, highlight Done and
then press
) on
Note: The maximum number of labels that
can be stored is 128.
To remove channel labels:
1 Open the Channel Labeling window.
2 Press or
you want to remove the label.
3
Press
then press
4
Repeat steps 2 and 3 for other channels.
5
To save your settings, highlight Done and
then press
to select the channel you want
to select the desired
.
.
to select the channel for which
to select {No Label} and
.
.
or