HP LC2000r - NetServer - 128 MB RAM Installation Manual page 2

Product Update: HP Netserver LXr 8500 Installation Guide: Gasket Installation (cont.)
4. Slide the top cover to the rear approximately ½ inch and remove it. See Figure 3-8 below.
5. Remove the existing gaskets on each side of the HP Netserver.
6. Place a new twenty-inch gasket 1/16
(Gaskets are supplied in the 900 MHz CPU Upgrade Kit.) See Figure 3-9 below.
HP Part Number 5971-3021
Printed in April 2001
Figure 3-8. Removing Screws and Sliding the Cover Back
th
inch from the edge of the cover slots on each side of the HP Netserver.
Figure 3-9. Place the New Gaskets on Each Side of the Server
'"&$ ( '