Protecting Your Hp Ipaq With A Password; Finding The Serial Number And Model Number - HP iPAQ rx4200 - Mobile Media Companion Product Information Manual

synchronized properly, go to ActiveSync on your personal computer and
select Tools > Add/Remove Programs and select any programs to reinstall.

Protecting Your HP iPAQ with a Password

Keep your data more secure by requiring a password every time you turn on
your HP iPAQ.
1. Tap Start >Settings > Personal tab > Lock > Password tab.
2. Select the Prompt if device unused for check box, and select the
amount of time from the list box that your HP iPAQ must be unused
before the password is required.
3. In the Password type field, select the type of password you would like
to use. Enter the password and confirm the password.
4. On the Hint tab, enter a phrase to help you remember your password.
Be sure that your hint doesn't allow others to guess your password. The
hint is displayed after the wrong password is entered five times.
5. When prompted, tap OK. The next time your HP iPAQ is unused for the
specified amount of time, you are prompted to enter your password.
TIP Use the same steps as above to change or reset your password.

Finding the Serial Number and Model Number

Locate the serial and model numbers before contacting HP Customer
Support, particularly if you are calling for in-warranty support.
View the serial number and model ID by tapping Start > Programs > HP Help
And Support > Serial and Model Number.
You can also find this information next to the battery of your HP iPAQ. To
locate the serial number:
1. Remove the battery cover.
2. Locate the label containing the serial number next to the battery.
16 HP iPAQ Product Information Guide ENWW