Dell 2130cn - Color Laser Printer User Manual page 37

Values:
Auto
Automatically performs color registration correction.
Correct
Prints a color registration chart. The color registration chart prints a lattice pattern of yellow, magenta, and cyan lines. On the chart, find the
values on the right side that are next to the straightest lines for each of the three colors. If the value for the straightest line is 0, color
ColorRegi
Chart registration adjustment is not required. If the value for the straightest line is any value other than 0, specify the adjustment values under
Enter Number.
Fast Scan
Enter
Number
Slow Scan
Adjust Altitude
Purpose:
To specify the altitude of the location where the printer is installed.
The discharge phenomenon for charging the photo conductor varies with barometric pressure. Adjustments are performed by specifying the altitude of the
location where the printer is being used.
NOTICE: An incorrect altitude adjustment setting leads to poor printing quality, incorrect indication of remaining toner, etc.
Values:
0m*
1000m
Specifies the altitude of the location where the printer is installed.
2000m
3000m
Clean Developer
Purpose:
To set whether to stir toner in a new toner cartridge.
Toner Refresh
Purpose:
To clean the toner in each toner cartridge.
Drum Refresh
Purpose:
To clean the surface of the PHD unit.
Init PrintMeter
Purpose:
To initialize the print meter of the printer. When the print meter is initialized, the meter count is reset to 0.
Reset Defaults
Purpose:
To initialize the NV (non-volatile) memory. After executing this function and rebooting the printer, all the menu parameters, except the parameters for the
network, are reset to their default values.
Y -9-+9 Specifies the values that are found in the color registration chart for Yellow.
M -9-+9 Specifies the values that are found in the color registration chart for Magenta.
C -9-+9 Specifies the values that are found in the color registration chart for Cyan.
Y -9-+9 Specifies the values that are found in the color registration chart for Yellow.
M -9-+9 Specifies the values that are found in the color registration chart for Magenta.
C -9-+9 Specifies the values that are found in the color registration chart for Cyan.