You can load up to:
5 sheets of custom sized paper
in the bypass tray
Your printer has two output locations; the rear output slot and the front output tray. Before you begin
copying, printing, or printing received faxes, refer to the table below about how much paper the printer
output trays can hold:
Output Location
front output tray (face down)
rear output slot (face up)
Setting the Paper Size and Type
Setting the Paper Size
After loading paper in the paper tray or the bypass tray, you need to set the paper size using the operator
panel buttons. This setting will apply to Fax and Copy modes. For PC-printing, you need to select the
paper type in the application program you use.
Press Scroll (
or
1
Press Select (
) to access Paper Setting.
2
Press Select (
) to access Paper Size.
3
Press Scroll (
or
4
Press Scroll (
or
5
Press Cancel (
) to return to Standby mode.
6
Setting the Paper Type
After loading paper in the paper tray or the bypass tray, you need to set the paper type using the operator
panel buttons. This setting will apply to Fax and Copy modes. For faxing, you can only set the paper type
to the Plain Paper. For PC-printing, you need to select the paper type in the application program you use.
Press Scroll (
or
1
Press Select (
) to access Paper Setting.
2
Press Scroll (
or
3
Press Scroll (
or
4
Press Cancel (
) to return to Standby mode.
5
Make sure:
Your paper size should fit within these dimensions:
Width
3.0-8.5 in. (76-216 mm)
Capacity
150 sheets of plain paper
1 sheet of paper
) to highlight Menu and press Select (
) to select the paper tray you want to use and press Select (
) to find the paper size you are using and press Select (
) to highlight Menu and press Select (
) to highlight Paper Type and press Select (
) to find the paper type you are using and press Select (
Length
5.0-14.0 in. (127-356 mm)
).
).
).
Loading Print Media
).
).
).
47