Panasonic DMP-MST60 Owner's Manual page 25

Audio
∫ Dynamic Range Compression
You can listen at low volumes but still hear dialog
clearly.
(Dolby ® Digital and Dolby
∫ Digital Audio Output
Press [OK] to show the following settings:
Dolby D/Dolby D +
DTS
Select the audio signal to output.
≥ Select "PCM", when the connected equipment
cannot decode the respective audio format.
This unit decodes the audio format and
transmits to the connected equipment.
≥ Not making the proper settings may result in noise.
∫ Downmix
Select the downmix system of multi-channel to
2-channel sound.
≥ Select "Surround encoded", when the connected
equipment supports the virtual surround function.
≥ The downmix effect is not available when
"Digital Audio Output" is set to "Bitstream".
[MST60]
3D
∫ 3D Playback Precautions
Set to display or hide the 3D viewing warning
screen when playing back 3D images.
∫ Pop-Out Level
Language
∫ Subtitle Text
Select a suitable item according to the language
used for MKV subtitles text.
≥ This item is displayed only after playing back a file.
∫ On-screen Language
Choose the language for menus and on-screen
messages.
® Digital Plus only)
( 23)
Settings
Network
∫ Easy Network Setting (
∫ Network Settings
Perform network-related settings individually.
Press [OK] to show the following settings:
LAN Connection Mode
Select the LAN connection method.
≥ Select "Wireless Master" when you make a
direct wireless connection between this unit
and a Home Network device. Internet
connection is not available when this item is
selected.
Wireless Settings
This allows the wireless router and connection
settings to be set. Current connection settings
and connection state can be checked.
Connection Setting
The wireless router connection wizard will be
displayed.
Double Speed Mode Setting (2.4GHz)
Set the connection speed for a 2.4 GHz
wireless format.
≥ If you connect using the "Double Speed
Mode (40MHz)", 2 channels use the same
frequency band, and there is consequently
a greater risk of reception interference. This
can cause the connection speed to drop or
become unstable.
IP Address/DNS Settings
This is for checking the state of the network
connection and setting the IP address and
DNS-related.
Press [OK] to show the respective setting.
Proxy Server Settings
This is for checking the state of connection with
the Proxy server and performing settings.
Press [OK] to show the respective setting.
- 25 -
10)