Key Features
(WX-LP100)
Integrated dual channel infrared wireless receiver
•
Two stereo (mixed to mono) multimedia inputs
•
Remote control of wireless microphones and multimedia
•
sources from presenter microphone
Wide horizontal signal dispersion for even coverage
•
Compact, lightweight and rugged design for flexible placement
•
Infrared technology provides an environment where frequency
•
interference & eavesdropping are problems of the past
Front panel controls for easy access
•
Adjustable output for recording
•
Adjustable output for assistive listening devices
•
Specifications
(WX-LP100)
Amplifier/Receiver Unit
Power Source
24 V DC (Using the attached AC adaptor unit)
Power Consumption
450 mA
75 Ω F type connector (with Sensor WX-LS100)
Infrared Sensor Input
Output power for Sensor: 22 V DC, 100 mA Max.
Receiving Channel
Ch1: 2.3 MHz, Ch2: 2.8 MHz
(Sub Carrier Frequencies)
Receiving System
TRF (Tuned Radio Frequency)
Squelch Level
24 dBµV (including Sensor)
Tone Squelch Frequency
32.768 kHz
Line Input 1, 2
-12 dBV, unbalanced, ø3.5 mini jack
(L and R mixing for stereo input)
Line Output
0 dBV, unbalanced, ø3.5 mini jack
(Monaural audio output for L and R)
Volume Control*
changeable microphone volume by the 2 dB step
(+6 dB ~ -16 dB) (Reset by power OFF/ON)
Speaker Type
12 cm Full Range Bass Reflex
SPL
93 dB SPL, 1 m, 1 W
Distortion
Less than 1 %
Frequency Response
100 Hz ~ 15 kHz (Line input ~ Speaker output)
+5 °C ~ +35 °C
Operating Temperature
Dimensions
187 (W) x 309 mm (H) x 209 mm (D) (7-3/8"(W) x 12-3/16"(H) x 8-1/4"(D))
Weight
approx. 3.7 kg (8.14 lbs.)
Finish
AV medium gray ABS resin (similar to Munsell N7)
* Volume controllable Microphone: WX-LT350
Infrared Sensor (attached)
Power Source
22 V DC (supplied from Amplifier/Receiver unit)
Power Consumption
20 mA
Infrared Ray Wavelength
850 nm
75 Ω F type connector
Sensor Output
Receiving Channel
Ch1: 2.3 MHz, Ch2: 2.8 MHz
(Sub Carrier Frequencies)
Dimensions
Max. ø113.5 mm x 34.5 mm (H) (ø4-7/16" x 1-3/8"(H))
(excluding a projection for F type connector)
Weight
approx. 0.2 kg (0.44 lbs.)
Finish
Black color / Infrared ray transmission acrylic resin
Infrared Wireless Portable Sound System
Infrared Wireless Powered Speaker
WX-LP100
All-in-one portable speaker incorporating
2-channel receiver, sensor,
amplifier and speaker.
®
As an ENERGY STAR
®
Partner
, Panasonic has
determined that this product
®
meets the ENERGY STAR
guidelines for energy efficiency.
Trademarks and registered trademarks
– ENERGY STAR and the ENERGY STAR mark are registered U.S. marks.
Important
– Safety Precaution: carefully read the operating instructions and installation manual before using this product.
DISTRIBUTED BY:
Infrared Wireless Portable Sound System
Infrared Wireless Microphone (Pendant)
WX-LT350
Hands-free pendant-style microphone.
Equipped with remote volume controls.
Ideal for teacher or presenter use.
Components and Functions
Front Panel
Rear Panel
Appearance
(WX-LP100)
Top
Front
187(7-3/8")
Bottom
Battery Charger
WX-LZ150
Direct connection.
Allows simultaneous charging
of 2 microphones.
•
• Weights and dimensions are approximate.
• Specifications are subject to change without notice.
• These products may be subject to export control regulations.
(WX-LP100)
POWER
MIC 1 Volume Control
MIC 2 Volume Control
LINE 1 Volume Control
LINE 2 Volume Control
Sensor Input
Line Input 2
Line Input 1
Line Output
Line Output Volume Control
Rear
Side
Unit: mm (inches)
Optional Accessory
Infrared Wireless Microphone (Handheld)
WX-LT150
Lightweight, simple design.
Ideal for student, teacher or
audience use.
All TV pictures are simulated.
www.panasonic.com/systemsintegration
3/2009 Printed in USA (1N-790C)