General Care & Cleaning; To Remove And Replace Warmer Drawer - Electrolux 318 201 018 Use And Care Manual

TO REMOVE AND REPLACE WARMER DRAWER

WARNING WARNING
WARNING WARNING WARNING
!
Turn the warmer drawer to OFF before removing the drawer. DO NOT touch
the warmer drawer element. The element may still be hot enough to cause
burns, even if it is dark in color.
To Remove Warmer Drawer:
1. Turn power off before removing the warmer drawer.
2. Open the drawer to the fully opened position.
3. Locate glide lever on each side of drawer, pull up on the
right glide lever and push down on the left glide lever (See
Figure 1).
4. Pull the drawer away from the range.
To Replace Warmer (Warm & Ready™) Drawer:
1. Pull the plastic slider to the front of the glide slots on
each side of the drawer cavity (See Figure 2).
2. Align the glide on each side of the drawer with the drawer
cavity glide slot.
3. Push the drawer into the drawer cavity until glide levers
"click" (approximately 2"). If you do not hear the glide
levers "click" or the drawer does not feel seated
remove the drawer and repeat steps 1 thru 3.
WARNING WARNING
WARNING WARNING WARNING
!
Electrical Shock Hazard can occur and result in
serious injury or death. Disconnect appliance
from electric power before cleaning and
servicing the warmer drawer.
General Care & Cleaning
9
Lever
Pull down lever
Left glide
with finger
Pull up lever
with finger
Lever
Figure 1
Figure 2
Right glide