PC437. You can run a printer check as described on page 5 to verify the current character Printing method table. s exclusive drop-on-demand Micro Piezo ink jet EPSON’ technology 3/97 EPSON Stylus Photo - 1...
Page 2
If you encounter problems, switch to a higher grade of paper. Do not load curled or folded paper. EPSON ink jet papers and other special media are only usable under normal conditions: Temperature: 59 to 77°F (15 to 25°C)
The minimum top margin is 0.12 inch (3.0 mm). Note: Always load paper into the sheet feeder short edge first. When loading multiple sheets of EPSON Photo Quality Glossy Film, However, envelopes should be loaded long edge first. the minimum top margin is 1.2 inches (30 mm).
Page 4
4 to 140 °F ( 20 to 60 °C), stored in – – Bit rate: Approx. 900 Kbps shipping container 1 month at 104 °F (40 °C) Handshaking: X-ON/X-OFF, DTR protocol 120 hours at 140 °F (60 °C) 3/97 4 - EPSON Stylus Photo...
Then release both buttons. out light button The printer prints one page containing a nozzle check pattern, the printer’s ROM version, ink counter code, and character table. 3/97 EPSON Stylus Photo - 5...
(Windows 3.1). To open it at any time, double-click the Spool Manager4 icon in the EPSON program group or folder. Note: In Windows 3.1, you may not see the Spool Manager icon if the Program Manager or current window is maximized. Make the window smaller to see the Spool Manager icon.
If you’re using background printing, Monitor2 starts automatically when you send a job to the printer. It handles printing while you continue to work on your Macintosh and lets you track documents that are waiting to be printed. 3/97 EPSON Stylus Photo - 7...
Page 8
Follow these steps: 1. Choose from the File menu or click the print icon in Print your application. You see the printer settings dialog box. 2. Click the button. Utility 3/97 8 - EPSON Stylus Photo...
These files can then be printed from another computer attached to the printer. First you need to install the EPSON Stylus Photo printer software on each computer that is going to print on the network. Then run Spool Manager and identify the shared directory to use for journal files.
S041067 Legal extension. EPSON Photo Quality Glossy Paper S041126 Letter S041124 EPSON Photo Quality Glossy Film S041071 EPSON 360 dpi, High Quality, and Photo Quality Ink Jet Letter S041072 Paper EPSON Photo Paper S041134 Caution: EPSON Ink Jet Transparencies S041063 Don’t use the cleaning sheets that may be included with...
Page 11
EPSON Photo paper: 1. Load the paper with the whiter side facing up and the EPSON Photo Quality Glossy Paper, Film, and perforated margins positioned as shown: Transparencies Follow these steps to print on glossy media or transparencies: 1.
Replacing an Ink Cartridge Caution: To ensure good results, use genuine EPSON cartridges and do not refill them. Other products may cause damage to your printer not covered by EPSON’s warranty. When a...
Page 13
EPSON Stylus Photo Use these EPSON ink cartridges within six months of Warning: If ink gets on your hands, wash them thoroughly with soap installing them and before the expiration date on the and water. If ink gets into your eyes, flush them package: immediately with water.
5. Follow the instructions on the screen to clean the print 2. Lower the output tray and raise the printer cover. heads. Cleaning takes about two minutes, during which the printer makes some noise and the power light flashes. 3/97 14 - EPSON Stylus Photo...
Page 15
TM-STYPHOTO EPSON Stylus Photo Service Manual Aligning the Print Heads PL-STYPHOTO EPSON Stylus Photo Parts Price List If your printouts contain misaligned vertical lines, you may 4007083 EPSON Stylus Photo User’s Guide need to align the print heads.