1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. PSAAKC-VA104C
  6. User manual

Toshiba PSAAKC-VA104C User Manual

User manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for Toshiba PSAAKC-VA104C

Summary of Contents for Toshiba PSAAKC-VA104C

  • Page 2 TOSHIBA A100 Copyright © 2006 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.
  • Page 3 TOSHIBA A100 Trademarks IBM is a registered trademark, and IBM PC and PS/2 are trademarks of International Business Machines Corporation. Intel, Intel SpeedStep and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries/regions.

  • Page 4: Safety Instructions

    TOSHIBA A100 Safety Instructions Use the following safety guidelines to help protect yourself and your computer. When Using Your Computer Do not operate your portable computer for an extended period of time with the base resting directly on your body. With extended operation, heat can potentially build up in the base.
  • Page 5 Low Voltage Directive 73/23/EEC for the supplied power adapter. CE Marking is the responsibility of TOSHIBA EUROPE GmbH, Hammfelddamm 8, 41460 Neuss, Germany, phone +49-(0)-2131-158-01. For a copy of the related CE Declaration of Conformity please refer to the following website: http://epps.toshiba-teg.com.

  • Page 6: Optical Disc Drive Safety Instructions

    TOSHIBA A100 Network Compatibility Statement This product is designed to work with, and is compatible with the following networks. It has been tested to and found to conform with the additional requirements conditional in EG 201 121. Germany ATAAB AN005,AN006,AN007,AN009,AN010 and...
  • Page 7 IEC 825 and EN60825 on class 1 laser product. This computer is equipped with one of the optical drive in the following list according to the model: Manufacturer Type TSST (TOSHIBA SAMSUNG DVD-ROM STORAGE TECHNOLOGY) SD-2732 Panasonic DVD-ROM&CD-R/RW...

  • Page 8: Important Notice

    Dispose of used batteries according to the manufacturer’s instructions. Use only the battery pack that came with the computer or an optional battery pack. Use of wrong battery could damage your computer. TOSHIBA assumes no liability for any damage in such case. User’s Manual viii...
  • Page 9 This manual tells how to set up and begin using your TOSHIBA A100 computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.

  • Page 10: Manual Contents

    TOSHIBA A100 Manual contents This manual is composed of nine chapters, five appendixes, a glossary, and an index. Chapter 1, Introduction, is an overview of the computer’s features, capabilities, and options. Chapter 2, The Grand Tour, identifies the components of the computer and briefly explains how they function.
  • Page 11 TOSHIBA A100 Conventions This manual uses the following formats to describe, identify, and highlight terms and operating procedures. Abbreviations On first appearance, and whenever necessary for clarity, abbreviations are enclosed in parentheses following their definition. For example: Read Only Memory (ROM). Acronyms are also defined in the Glossary.
  • Page 12 TOSHIBA A100 Messages Messages are used in this manual to bring important information to your attention. Each type of message is identified as shown below. Pay attention! A caution informs you that improper use of equipment or failure to follow instructions may cause data loss or damage your equipment.

  • Page 13: General Precautions

    General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury, damage to the computer or impared performance. Be certain to read the general precautions below and to note the cautions included in the text of the manual.
  • Page 14 For optimum performance, use your computer product only under recommended conditions. Read additional restrictions in bundled documents. Contact TOSHIBA Service and Support for more information. Non-applicable Icons Certain notebook chassis are designed to accommodate all possible configurations for an entire product series.

  • Page 15: Copy Protection

    TOSHIBA A100 Wireless LAN/Atheros For 802.11a, b and g The transmission speed over the wireless LAN and the distance over which wireless LAN can reach may vary depending on surrounding electromagnetic environment, obstacles, access point design and configuration, and client design and software/hardware configurations.

  • Page 16: Main Memory Disclaimer

    TOSHIBA A100 LCD Brightness and Eye Strain Your LCD display has a brightness approaching that of a TV device. We recommend that you adjust the brightness of your LCD to a comfortable level to prevent possible strain on your eyes.

  • Page 17: Table Of Contents

    Table of Contents Preface General Precautions Introduction Chapter 1 Equipment checklist........1-1 Features.
  • Page 18 (+-R Double Layer) drive ........4-19 RecordNow! Basic for TOSHIBA ......4-23 Video .
  • Page 19 TOSHIBA support ........

  • Page 20: Introduction

    Some of the features described in this manual may not function properly if you use an operating system that was not pre- installed by TOSHIBA. Equipment checklist Carefully unpack your computer. Save the box and packing materials for future use.
  • Page 21 TOSHIBA Controls ■ TOSHIBA Virtual Sound ■ TOSHIBA Acoustic Silencer ■ TOSHIBA Hotkey Utility ■ TOSHIBA SD Memory Card Format Utility ■ RecordNow!Basic for TOSHIBA * ■ DLA for TOSHIBA * ■ TOSHIBA DVD-RAM driver * ■ WinDVD Creator 2 Platinium * ■...

  • Page 22: Features

    ■ Express Media Player Recovery CD * Features The computer uses TOSHIBA’s advanced Large Scale Integration (LSI), Comple-mentary Metal-Oxide Semiconductor (CMOS) technology extensively to provide compact size, minimum weight, low power usage, and high reliability. This computer incorporates the following features and...
  • Page 23 Introduction Disks Hard disk The computer has an integrated, 2 1/2" hard disk drive drive (HDD) for nonvolatile storage of data and software. It comes in the following sizes. 40 GB (37.26 billion bytes) 60 GB (55.89 billion bytes) 80 GB (74.52 billion bytes) 100 GB (93.15 billion bytes) 120 GB (111.78 billion bytes) Diskette...
  • Page 24 Introduction CD-RW/ Some models are equipped with a full-size, CD-RW/ DVD-ROM DVD-ROM drive module that lets you run CD/DVDs drive without using an adaptor. It reads DVD-ROMs at maximum 8 speed and CD-ROMs at maximum 24 speed. It writes CD-R at up to 24 speed and CD-RW at up to 24 speed.
  • Page 25 Introduction DVD Super Some models are equipped with a full-size DVD Super Multi (+-R Multi (+- R Double Layer) drive module that lets you Double record data to rewritable CD/DVDs as well as run either Layer) 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an drive adaptor.

  • Page 26: Pointing Device

    Introduction Keyboard ® Built-in 85 keys or 86 keys, compatible with IBM enhanced keyboard, embedded numeric overlay, dedicated cursor control, keys. See Chapter 5, Keyboard, for details. Pointing Device Built-in A Touch Pad/Dual Mode Pad and control buttons in the palm rest enable control of the on-screen pointer.
  • Page 27 Introduction Slots PC card A PC card slot accommodates: One 5 mm Type II card Refer to Chapter 8, Optional Devices, for details Multiple This slot lets you easily transfer data from devices, such Digital as digital cameras and Personal Digital Assistants, that Media Card use flash memory (SD/MS/MS Pro/MMC/xD memory cards).
  • Page 28 Introduction Wireless Some computers in this series are equipped with a Wireless LAN mini card that is compatible with other LAN systems based on Direct Sequence Spread Spectrum/Orthogonal Frequency Division Multiplexing radio technology that complies with the IEEE 802.11 Standard (Revision A, B and G), and Turbo Mode. Automatic Transmit Rate Select mechanism in the transmit range of 54, 48, 36, 24, 18, 12, 9 and 6 Mbit/s (Revision A/B, B/G, A/B/G combo type).

  • Page 29: Special Features

    Special Features The following features are either unique to TOSHIBA computers or are advanced features, which make the computer more convenient to use. Hot keys Key combinations let you quickly modify the system configuration directly from the keyboard without running a system configuration program.
  • Page 30 You can specify the setting in the When I close the lid item of the Setup Action tab in TOSHIBA Power Saver. When battery power is exhausted to the point that...

  • Page 31: Utilities

    Diagnostic some of the built-in devices functionality to be tested. Tool You can boot TOSHIBA PC Diagnostic Tool from the menu bar as follows: [Start] - [All Programs] - [TOSHIBA] - [Utilities] - [PC Diagnostic Tool] User’s Manual...
  • Page 32 You can boot ConfigFree from the menu bar as follows: [Start] - [All Programs] - [TOSHIBA] - [Networking] - [ConfigFree] Dual Mode The DualMode TouchPad is a TouchPad that provides...

  • Page 33: Options

    ■ 9 cells Type (PA3478U-1BAS/PA3478U-1BRS), ■ 12 cells Type (PA3400U-1BAS/PA3400U-1BRS) can be purchased from your TOSHIBA dealer. The battery pack is identical to the one that came with your computer. Use it as a spare or replacement. AC adaptor If you use your computer at more than one site, it may...

  • Page 34: Chapter 2 The Grand Tour

    Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Front with the display closed The figure below shows the computer’s front with its display panel in the closed position familiar with each component before you operate the computer.

  • Page 35: Left Side

    The Grand Tour Microphone A standard 3.5 mm mini microphone jack enables jack connection of a monaural microphone or other device for audio input. Headphone A standard 3.5 mm mini headphone jack enables jack connection of a stereo headphone (16 ohm minimum) or other device for audio output.
  • Page 36 The Grand Tour Video-out jack Plug a 4-pin S-Video connector into this jack. i.LINK Connect an external device, such as a digital video (IEEE 1394) camera to this port for high-speed data transfer. Some Port models are equipped with a i.LINK port. (Provided with some models) When multiple IEEE1394 devices are connected to a PC, the devices may ®...

  • Page 37: Right Side

    The Grand Tour Right side The figure below shows the computer’s right side. Wireless communication switch * Security lock slot USB Ports Optical Media Drive Modem jack The right side of the computer Universal The two Universal Serial Bus (USB) ports comply with Serial Bus USB Serial 2.0 standards, which enables data transfer Ports...

  • Page 38: Back Side

    The Grand Tour Back side The figure below shows the computer’s back side. USB Ports LAN jack DC IN 15V The computer’s back side Universal The two Universal Serial Bus (USB) ports comply with Serial Bus USB Serial 2.0 standards, which enables data transfer Ports speeds 40 times faster than the USB 1.1 standards.

  • Page 39: Underside

    Chapter 6, Power and Power-Up Modes, describes how to access the battery pack. Additional battery packs can be purchased from your TOSHIBA dealer to extend the computer’s battery operating time. Battery pack Slide this latch to release the battery pack.

  • Page 40: Front With The Display Open

    The Grand Tour Front with the display open The figure below shows the front of the computer with the display open. To open the display, slide the display latch on the front of the computer and lift the display up. Position the display at a comfortable viewing angle. Display Screen Display Hinge Display Hinge...

  • Page 41: Av Buttons

    The Grand Tour Touch Pad Function like the left and right buttons on an external Control mouse. Buttons Power Button Press the power button to turn the computer’s power on and off. The Power button LED indicates the status. AV Buttons Some models are equipped with some of the following buttons.

  • Page 42: System Indicators

    The Grand Tour System indicators The figure below shows the system indicators, which light when various computer operations are in progress. Multiple Digital Media card slot * Disk Main battery Power DC IN Systems indicators DC IN The DC IN indicator glows blue when DC power is supplied from the AC power adaptor.

  • Page 43: Keyboard Indicators

    The Grand Tour Keyboard indicators The figures below show the positions of the keypad overlay indicators and the CapsLock indicator. When the F10 key indicator glows the keypad overlay lets you control the cursor. When the F11 key indicator glows the keypad overlay lets you enter numbers.

  • Page 44: Usb Diskette Drive

    The Grand Tour USB diskette drive A 3 1/2" diskette drive accommodates 1.44-megabyte or 720-kilobyte diskettes. It connects to the USB port. Disk-In-Use Indicator Diskette slot Eject button USB diskette drive Disk-In-Use This indicator lights when the diskette is being Indicator accessed.

  • Page 45: Optical Media Drive

    Writable discs This section describes the types of writable CD/DVD discs. Check the specifications for your drive to for the type of discs it can write. Use RecordNow! Basic for TOSHIBA to write compact discs. Refer to Chapter 4, Operating Basics.
  • Page 46 The Grand Tour Formats The drives support the following formats: ■ ■ DVD-ROM DVD-Video ■ ■ CD-DA CD-Text ■ ■ Photo CD™ (single/multi-session) CD-ROM Mode 1, Mode 2 ■ ■ CD-ROM x A Mode 2 (Form1, Enhanced CD (CD-EXTRA) Form2) ■...

  • Page 47: Remote Control

    The Grand Tour The read speed is slower at the center of a disc and faster at the outer edge. DVD read 8 speed (maximum) DVD-R write 8 speed (maximum) DVD-RW write 6 speed (maximum) DVD+R write 8 speed (maximum) DVD+RW write 8 speed (maximum) DVD+R DL write...
  • Page 48 The Grand Tour Part Names of Remote Control The figure below shows the buttons on the remote control. Refer to the descriptions on the next page of the functions of each button. Express Media Player WinDVD Windows Media Player Button Turns the computer on and off.

  • Page 49: Ac Adaptor

    Power and Power-Up Modes for details. The AC adaptor Use of the wrong adaptor could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 15 volts DC. Please use only the AC adaptor supplied with the computer or an AC adaptor certified by TOSHIBA.

  • Page 50: Chapter 3 Getting Started

    Chapter 3 Getting Started This chapter provides basic information to get you started using your computer. It covers the following topics: ■ Setting up your work space — for your health and safety Be sure also to read Instruction Manual for Safety & Comfort. This guide, which is included with the computer, explains product liability.

  • Page 51: Setting Up Your Work Space

    Getting Started Setting up your work space Establishing a comfortable work site is important for you and your computer. A poor work environment or stressful work habits can result in discomfort or serious injury from repetitive strain to your hands, wrists or other joints.

  • Page 52: Placement Of Computer

    Getting Started Placement of computer Position the computer and peripheral devices to provide comfort and safety. ■ Set the computer on a flat surface at a comfortable height and distance. The display should be no higher than eye level to avoid eye strain. ■...

  • Page 53: Work Habits

    Getting Started Lighting Proper lighting can improve legibility of the display and reduce eye strain. ■ Position the computer so that sunlight or bright indoor lighting does not reflect off the screen. Use tinted windows, shades or other screen to eliminate sun glare.

  • Page 54: Connecting The Ac Adaptor

    Chapter 6, Power and Power-Up Modes. Use of the wrong adaptor could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 15 volts DC.

  • Page 55: Opening The Display

    Getting Started Opening the display The display panel can be rotated in a wide range of angles for optimal viewing. 1. Slide the display latch on the front of the computer to the right to unlatch the display panel. 2. Lift the panel up and adjust it to the best viewing angle for you. When you open the display, hold it with both hands and lift up slowly.

  • Page 56: Starting Up For The First Time

    Getting Started Starting up for the first time When you first turn on the power, the computer’s initial screen is the ® Microsoft Windows XP Startup Screen Logo. Follow the on-screen directions. Turning off the power The power can be turned off in one of the following modes: Shut down (Boot), Hibernation or Standby mode.

  • Page 57: Starting Hibernation

    For the computer to shut down in hibernation mode, the hibernation feature must be enabled in two places: the Hibernate tab in Power Options and Setup Action tab in TOSHIBA Power Saver. Otherwise, the computer will shut down in Standby mode. If battery power becomes depleted, data saved in Standby mode will be lost.

  • Page 58: Standby Mode

    2. Close the display panel. This feature must be enabled. Refer to the System Power Mode item in Power Saver Utility described in the Control Panel. ® In Windows XP, open Performance and Maintenance and open TOSHIBA Power Saver. User’s Manual...

  • Page 59: Restarting The Computer

    Control Panel. ® In Windows XP, open Performance and Maintenance and open TOSHIBA Power Saver. When you turn the power back on, you can continue where you left when you shut down the computer. ■ When the computer is shut down in standby mode, the power indicator glows orange.

  • Page 60: Restoring The Preinstalled Software

    Getting Started Restoring the preinstalled software If preinstalled files are damaged, use the Product Recovery Media to restore them. To restore the operating system and all preinstalled software, follow the steps below. Please use the Express Media Player Recovery CD first to reinstall the "Express Media Player"...

  • Page 61: Restoring The Operating System

    Restoring TOSHIBA utilities and drivers If Windows is working properly, individual drivers or applications can be separately restored. The TOSHIBA Tools & Utilities folder (C:\TOOLSCD) contains drivers and applications, which are included with your computer system. If your system drivers or applications have become damaged in some way, you can reinstall most of the components from this folder.

  • Page 62: Chapter 4 Operating Basics

    Chapter 4 Operating Basics This chapter gives information on basic operations including using the Touch Pad/Dual Mode Pad, USB diskette drive, optical media drives, the microphone, the internal modem, wireless communication and LAN. It also provides tips on caring for your computer, diskettes and CD/DVDs. Using the Touch Pad/Dual Mode Pad To use the Touch Pad/Dual Mode Pad, simply touch and move your finger tip across it in the direction you want the on-screen pointer to go.

  • Page 63: Dual Mode Pad Button Function

    Operating Basics Touch Pad/Dual Fingerprint Mode Pad Sensor * Touch Pad Control Buttons Touch Pad/Dual Mode Pad and Touch Pad control buttons Dual Mode Pad Button function Some models in this series are provided with a Dual Mode Pad. Mail Button Print Out Config Free Switch Button...

  • Page 64: Using The Usb Diskette Drive

    Operating Basics Print out To send the item in the active window to the printer. Application Three application buttons have default setting. You can buttons assign other functions and programs to button 1 to 3. Please refer to "Properties for Synaptics Dual Mode Pad" for details Using the USB diskette drive A 3 1/2"...

  • Page 65: Using Optical Media Drives

    Operating Basics Disconnecting 3 1/2" diskette drive When you have finished using the diskette drive, follow the procedures below to disconnect it: 1. Wait for the indicator light to go out to make sure all diskette activity has stopped. If you disconnect the diskette drive or turn off the power while the computer is accessing the drive you may lose data or damage the diskette or the drive.
  • Page 66 Operating Basics b. Pressing the eject button will not open the drawer when the DVD-ROM drive’s power is off. If the power is off, you can open the drawer by inserting a slender object (about 1.5 mm) such as a straightened paper clip into the eject hole just to the right of the eject button.
  • Page 67 Operating Basics When the drawer is fully opened, the edge of the computer will extend slightly over the CD/DVD tray. Therefore, you will need to turn the CD/DVD at an angle when you place it in the tray. After seating the CD/DVD, however, make sure it lies flat, as shown in figure above.

  • Page 68: Removing Discs

    Operating Basics Removing discs To remove the CD/DVD, follow the steps below and refer to figure below. Do not press the eject button while the computer is accessing the DVD-ROM drive. Wait for the optical media drive indicator to go out before you open the drawer.

  • Page 69: Av Button Function

    Operating Basics AV Button function Some models are provided with a some of the AV buttons described below. AV Button Windows mode Express Media Player mode Icon AV Button DVD *CD/DVD (WinDVD5) (WMP10) CD/DVD Detect and Detect and Detect and Detect and activate media activate media...

  • Page 70: Remote Control

    Operating Basics Remote Control Some models are optional provided with a Remote Control. The remote control unit allows you to control some of your computer’s functions from a distant location. Using the Remote control The remote control is designed specifically for this computer. Some application programs may not support remote control functions.

  • Page 71: Precautions For Use

    Operating Basics Precautions for use Even if within the effective scope as described above, the remote control may malfunction or not work correctly in the following cases. ■ When an obstacle stands between the infrared receiver window of your computer and the remote controller. ■...

  • Page 72: Installing The Batteries

    Operating Basics Installing the batteries 1. Open the battery cover on the back side of the remote controller. Push and remove the battery cover. Opening the battery cover 2. Insert the batteries in place. Be sure to place the batteries with their polarities (+ and -) in the correct position.
  • Page 73 Operating Basics 2. Replace the batteries. Be sure to place the batteries with their polarities (+ and -) in the correct position. Replacing the batteries 3. Close the battery cover. Close the cover securely until it clicks. Closing the battery cover Installing/Removing Remote Controller This Remote Conroller can be installed in PC Card Slot.

  • Page 74: Express Media Player

    Operating Basics Express Media Player Express Media Player is a quick play feature that enables users to perform DVD and CD playback without loading Windows. The availability of the Express Media Player depends on the model of computer you have purchased. Express Media Player offers a 'quick play' feature that enables users to playback CD and DVD content without having to use the main Windows operating system.

  • Page 75: Express Media Player Settings

    Operating Basics Express Media Player (DVD) Usage ■ Express Media Player (DVD) plays the disc according to the way the DVD-Video has been programmed by the producer, hence sometimes it might not work as expected. ■ ( ) might appear on screen during operation. When ( ) is displayed, it means that Express Media Player (DVD) or DVD-Video prohibits that particular operation from being carried out.
  • Page 76 Operating Basics Display Language Code Language English English Español Spanish Français French Italiano Italian Nederlands Dutch Português Portuguese Simplified Chinese Traditional Chinese Deutsch German Display Language Keyboard Code Keyboard Code US English Portuguese UK English Russian Spanish Swedish French Turkish Canadian- Arabic French...
  • Page 77 Operating Basics Front panel Computer Fn + F7 Increases the Increases the brightness brightness Fn + F6 Decreases the Decreases the brightness brightness Select track 1 Select chapter 1 Select track 2 Select chapter 2 Select track 3 Select chapter 3 Select track 4 Select chapter 4 Select track 5...

  • Page 78: Writing Cds On Cd-Rw/Dvd-Rom Drive

    Operating Basics Front panel Computer Skip by about Skips forwards 10 seconds quickly Space Play or pauses Play or pauses Ctrl + Space Stop Stop Next track Next chapter Previous track Previous chapter Ctrl + R Repeat Ctrl + S Shuffle Changes the Changes the...

  • Page 79: Before Writing Or Rewriting

    MITSUBISHI CHEMICAL CORPORATION, RICOH Co., Ltd. ■ Ultra-speed CD-RW: MITSUBISHI CHEMICAL CORPORATION TOSHIBA has confirmed the operation of CD-R and CD-RW media of the manufacturers above. Operation of other media cannot be guaranteed. ■ CD-RW can generally be rewritten about 1,000 times. However, the actual number of rewrites is affected by the quality of the media and the way it is used.

  • Page 80: Writing Cd/Dvds On Dvd Super Multi (+-R Double Layer) Drive

    Keep mobile phones and other wireless communication devices away from the computer. Disclaimer (CD-RW/DVD-ROM drive) TOSHIBA does not bear responsibility for the following: ■ Damage to any CD-R/RW disc that may be caused by writing or rewriting with this product.
  • Page 81 Based on TOSHIBA’s limited compatibility testing, we suggest the following manufacturers of CD-R/RW and DVD-R/+R/-RW/+RW/-RAM/ +R DL/-R DL disc. ■ However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates. CD-R: TAIYOYUDEN CO., LTD.
  • Page 82 Operating Basics ■ There are two types of DVD-R discs: authoring and general use discs. Do not use authoring discs. Only general use discs can be written to by a computer drive. ■ We can support only format 1 of DVD-R DL. Therefore you can not do the additional writing.
  • Page 83 Always copy data from the HDD to the DVD-RAM. Do not use cut-and- paste. The original data will be lost if there is a write error. Disclaimer (DVD Super Multi (+-R Double Layer) drive) TOSHIBA does not bear responsibility for the following: ■ Damage to any CD-R/RW or DVD-R/-R DL/-RW/+R/+R DL/+RW/DVD- RAM disc that may be caused by writing or rewriting with this product.

  • Page 84: Recordnow! Basic For Toshiba

    Operating Basics RecordNow! Basic for TOSHIBA Note the following limitations when you use RecordNow!: ■ DVD-Video cannot be created using RecordNow!. ■ DVD-Audio cannot be created using RecordNow!. ■ You cannot use RecordNow!’s “Audio CD for Car or Home CD Player”...

  • Page 85: Data Verification

    3. Mark the Verify data written to the disc after burning check box in the Data Options. 4. Click the OK button. DLA for TOSHIBA Note the following limitations when you use DLA: ■ This software supports only rewritable discs (DVD+RW/+R DL, DVD- RW/-R DL, and CD-RW).

  • Page 86: Video

    Operating Basics Video You can record video using WinDVD Creator 2 Platinum. When using WinDVD Creator 2 Platinum: You can record video back to your digital camcorder via i.LINK (IEEE1394) using WinDVD Creator 2 Platinum. However, there is a case where its playback sound is choppy.
  • Page 87 Operating Basics ■ Make sure that your computer is running on AC power when using WinDVD Creator. ■ Operate the computer at Full Power. Do not use power-saving features. ■ While you are editing DVD, you can display previews. However, if another application is running, the preview might not display properly.

  • Page 88: Media Care

    Operating Basics ■ A maximum of about 2 hours of video data can be written in DVD Video format to DVD-R/+R/-RW/+RW disc. ■ WinDVD Creator cannot export to DVD-Audio, VideoCD, miniDVD format. ■ WinDVD Creator can write DVD-RAM/+RW in VR format, but the disc may only play on your computer.

  • Page 89: Using The Microphone

    Operating Basics 6. If your CD/DVDs become dusty or dirty, wipe them with a clean dry cloth. Wipe from the center out, do not wipe in a circular direction around the CD/DVD. If necessary, use a cloth dampened in water or a neutral cleaner.

  • Page 90: Modem

    To select a region, follow the steps below. 1. In Windows XP, click start, point to All Programs, point to TOSHIBA, point to Networking and click Modem Region Select Utility. Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available.

  • Page 91: Properties Menu

    Operating Basics Properties menu Click the icon with the secondary mouse button to display the following menu. The menu list (Windows XP) Setting You can enable or disable the following settings: AutoRun Mode The Region Select utility starts automatically when you start up the operating system.

  • Page 92: Wireless Communications

    Operating Basics Connecting To connect the internal modem cable, follow the steps below. 1. Plug one end of the modular cable into the modem jack. 2. Plug the other end of the modular cable into a telephone jack. Telephone Jack Modem Jack Connecting the internal modem Do not pull on the cable or move the computer while the cable is...

  • Page 93: Bluetooth Wireless Technology

    TOSHIBA strongly recommends the customer to enable the WEP function. ■ TOSHIBA is not liable for the eavesdropping of data due to the use of Wireless LAN and the damage thereof. Bluetooth wireless technology Bluetooth™ wireless technology eliminates the need for cables between electronic devices such as desktop computers, printers and mobile phones.

  • Page 94: Worldwide Operation

    Operating Basics Worldwide operation The Bluetooth radio transmitter and receiver operates in the 2.45 GHz band, which is license-free and compatible with radio systems in most countries in the world. Radio links You can easily establish links between two or more devices. The link is maintained even if the devices are not within line of sight.

  • Page 95: Lan

    Operating Basics The computer has built-in support for Ethernet LAN (10 megabits per second, 10BASE-T) ,Fast Ethernet LAN (100 megabits per second, 100BASE-TX) or Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T).(depend on model you purchased) This section describes how to connect/disconnect to a LAN. Do not install or remove an optional memory module while Wake-up on LAN is enabled.

  • Page 96: Cleaning The Computer

    Operating Basics When the computer is exchanging data with the LAN, the LAN active indicator glows amber. When the computer is connected to a LAN hub but is not exchanging data, the Link indicator glows green. Disconnecting LAN cable To disconnect the LAN cable, follow the steps below. Make sure the LAN active indicator (orange LED) is out before you disconnect the computer from the LAN.

  • Page 97: Heat Dispersal

    CPU speed. Or, by lowering the CPU speed first, then if necessary, turning on the fan. Use the Cooling Method item of the Basic Setup window in TOSHIBA Power Saver. Maximum Turn on the fan first, then if necessary, lower the Performance CPU processing speed.

  • Page 98: Chapter 5 The Keyboard

    Chapter 5 The Keyboard The computer’s keyboard layouts are compatible with a 101/102-key enhanced keyboard. By pressing some keys in combination, all the 101/102-key keyboard functions can be executed on the computer. The number of keys on your keyboard depends on which country/region’s keyboard layout your computer is configured with.

  • Page 99: F1 ... F12 Function Keys

    Soft keys: Fn key combinations The Fn (function) is unique to Toshiba computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features.
  • Page 100 The Keyboard Press Fn + F12 (ScrLock) to lock the cursor on a specific line. The power on default is off. Press Fn + Enter to simulate Enter on the enhanced keyboard’s numeric keypad. Press Fn + Ctrl to simulate the enhanced keyboard’s right Ctrl key. Press Fn + Alt to simulate the enhanced keyboard’s right Alt key.
  • Page 101 The Keyboard Power save mode: Pressing Fn + F2 changes the power save mode. If you press Fn + F2, the Power Save Mode is displayed in a dialog box. Continue holding down Fn and press F2 again to change the setting. You can also change this setting through the Plugged in or Running on batteries item of the Power Saver Properties window in Power Saver.
  • Page 102 The Keyboard Display Brightness: Pressing Fn + F7 increases the display brightness in increments. When you press these hotkeys, the current setting will be displayed for two seconds by a pop-up icon. You can also change this setting through the Screen brightness item of the Basic Setup window in Power Saver.

  • Page 103: Windows Special Keys

    Fn key. Fn Sticky key You can use the Toshiba Accessibility Utility to make the Fn key sticky, that is, you can press it once, release it, and they press an “F number” key. To start the Toshiba Accessibity Utility, click start, point to All Programs, point to TOSHIBA, point to Utilities and click Accessibility.

  • Page 104: Keypad Overlay

    The Keyboard Keypad overlay Your computer’s keyboard does not have an independent numeric keypad, but its numeric keypad overlay functions like one. The keys in the center of the keyboard with white letters make up the numeric keypad overlay. The overlay provides the same functions as the numeric keypad on the 101/102-key enhanced keyboard in figure 5-1.

  • Page 105: Generating Ascii Characters

    The Keyboard Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard without turning off the overlay: 1. Hold Fn and press any other key. All keys will operate as if the overlay were off.

  • Page 106: Chapter 6 Power And Power-Up Modes

    Chapter 6 Power and Power-Up Modes The computer’s power resources include the AC adaptor and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes. Power conditions The computer’s operating capability and battery charge status are affected by the power conditions: whether an AC adaptor is connected, whether a...

  • Page 107: Power Indicators

    Amber DC IN off Battery charge is Computer goes into exhausted Hibernation or shuts down (depending on the Toshiba power Management Utility Setting) No battery installed • No operation • LED: Battery off DC IN off Power indicators The Battery, DC IN and Power indicators on the system indicator panel alert you to the computer’s operating capability and battery charge status.

  • Page 108: Battery Types

    Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements The battery recharges the RTC batteries. The battery maintains the state of the computer when you enable Resume.

  • Page 109: Real Time Clock Battery

    Check system. Then press [F1] key ..The computer’s RTC battery is a lithium ion battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of.

  • Page 110: Safety Precautions

    Power and Power-Up Modes Safety precautions Mishandling of batteries can cause death, serious injury or property damage. Carefully observe the following advisories: Danger: Indicates an imminently hazardous situation, Which could result in death or serious injury, if you do not follow instructions. Warning: Indicates a potentially hazardous situation, Which could result in death or serious injury, if you do not follow instructions.
  • Page 111 Never use the computer again until it has been checked by a TOSHIBA service provider. It might generate smoke or fire, or the battery pack might rupture. 3. Make sure the battery is securely installed in the computer before attempting to charge the battery pack.

  • Page 112: Charging The Batteries

    The computer enters Hibernate mode only if Hibernation is enabled in two places: the Hibernate tab in Power Options and Setup Action tab in TOSHIBA Power Saver. You must recharge a battery pack when it becomes discharged. Procedures...

  • Page 113: Battery Charging Notice

    Power and Power-Up Modes Time The following table shows the approximate time required to fully charge a discharged battery. Charging time (hours) Battery type System on System off Battery pack (6 cell) 8 hours or more 4 hours Battery pack (9 cell) 8 hours or more 4 hours Battery pack (12 cell)

  • Page 114: Monitoring Battery Capacity

    Therefore, an often used, older battery will not operate for as long as a new battery even when both are fully charged. In this case, TOSHIBA Power Saver will indicate a 100% charge for both the old and new battery, but the displayed estimated time remaining will be shorter for the older battery.

  • Page 115: Retaining Data With Power Off

    Power and Power-Up Modes Retaining data with power off When you turn off your computer with fully charged batteries, the batteries retain data for the following approximate time periods: Battery pack (6 cell) about 2 days (Standby mode) about 20 days (Shutdown mode) Battery pack (9 cell) about 2 days (Standby mode) about 30 days (Shutdown mode)

  • Page 116: Replacing The Battery Pack

    Power and Power-Up Modes Replacing the battery pack When the battery pack reaches the end of its operating life you will need to install a new one. If the Battery indicator flashes amber shortly after fully recharging the battery, the battery pack needs to be replaced. You might also replace a discharged battery pack with a charged spare when you are operating your computer away from an AC power source.

  • Page 117: Installing The Battery Pack

    7. Pull the battery pack forward to remove it. For environmental reasons, do not throw away a spent battery pack. Please return spent battery pack to your TOSHIBA dealer. Installing the battery pack To install a battery pack, follow the steps below.

  • Page 118: Starting The Computer By Password

    Chapter 3, Getting Started. Windows utilities You can specify the setting in TOSHIBA Power Saver. Hotkeys You can use hotkeys Fn + F3 to enter Standby mode and Fn + F4 to enter Hibernation. See Chapter 5, Keyboard, for details.

  • Page 119: Chapter 7 Hw Setup And Passwords

    TOSHIBA HW Setup lets you configure settings for display, boot priority, keyboard, USB, LAN, general and password. If the supervisor password is set, access to the TOSHIBA HW Setup program can be prevented when the user password is used to log on to the computer.

  • Page 120: User Password

    HW Setup and Passwords HW Setup window The HW Setup window contains the following tabs: Display, CPU, Boot Priority, Keyboard, USB, LAN, General, and Password. There are three buttons: OK, Cancel and Apply Accepts your changes and closes the HW Setup window.
  • Page 121 HW Setup and Passwords If you click the OK button before entering the password, Not registered will appear on the display. 2. Click the OK button. The following message appears, allowing you to verify the password. Verify Password: 3. If character strings match, the password is registered click OK button. If they do not match, the following message appears.

  • Page 122: Power On Display

    HW Setup and Passwords Display This tab lets you customize your computer’s display settings for either the internal LCD screen or for an external monitor. Power On Display Lets you set the display to be used when the computer is booted. Auto-Selected Selects an external monitor if one is connected.

  • Page 123: Boot Priority

    HW Setup and Passwords Boot Priority Boot Priority Options This option sets the priority for booting the computer. PC card HDD boot is not supported. To change the boot drive, follow the steps below. 1. Hold down F12 and boot the computer. 2.

  • Page 124: Legacy Usb Support

    HW Setup and Passwords Legacy USB Support Use this option to enable or disable USB KB/Mouse Legacy Emulation. If your operating system does not support USB, you can still use a USB mouse and keyboard by setting the USB KB/Mouse Legacy Emulation item to Enabled...

  • Page 125: Chapter 8 Optional Devices

    Chapter 8 Optional Devices Optional devices can expand the computer’s capabilities and its versatility. The following optional devices are available from your TOSHIBA dealer: Cards/memory ■ PC cards ■ SD, MS, MS Pro, MMC, xD memory cards ■ Memory expansion ■...

  • Page 126: Pc Cards

    The computer is equipped with a PC card expansion slot that can accommodate one 5 mm Type II card. Any PC card that meets industry standards (manufactured by TOSHIBA or other vendor) can be installed. The slots support 16-bit PC cards, including PC card 16’s multifunction card and CardBus PC cards.

  • Page 127: Express Card

    Optional Devices Removing a PC card To remove the PC card, follow the steps below. ® 1. In Windows XP, open the Safely Remove Hardware icon on the system tray and disable the PC card. 2. Press the eject button of the PC card you want to remove to extend the button.

  • Page 128: Multiple Digital Media Card Slot

    Optional Devices 3. Check the configuration in the HW Setup window to make sure it is appropriate for your card. Express Card slot Inserting the Express Card Removing an Express Card To remove the Express Card, follow the steps below. ®...
  • Page 129 Memory Stick Duo/Memory Stick Pro Duo/Mini SD card is not supported. Insert only one card when using Multiple Digital Media Card Slot. Use TOSHIBA SD Memory Card Format Utility for formatting. Do not ® format a memory card with Windows as it might result in that the card not being able to be used with some peripheral dvides.

  • Page 130: Memory Expansion

    Optional Devices Removing a SD/MS/MS Pro/MMC/xD card To remove the memory card, follow the steps below. ® 1. In Windows XP, open the Safely Remove Hardware icon on the system tray and disable the inserted memory card. 2. Gently press the memory card inside the socket to eject it. 3.

  • Page 131: Installing Memory Module

    Optional Devices Installing memory module To install a memory module, make sure the computer is in boot mode then: 1. Turn the computer off in boot mode. Refer to the Turning off the power section in Chapter 3. ■ If you use the computer for a long time, the memory modules will become hot.

  • Page 132: Removing Memory Module

    Optional Devices Inserting the memory module 8. Seat the cover and secure it with one screw. 9. When you turn the computer on, it should automatically recognize the total memory capacity. Use the HW Setup program to verify that the added memory is recognized.

  • Page 133: Additional Battery Pack (6 Cell, 9 Cell And 12 Cell)

    Optional Devices Removing the memory module 7. Seat the cover and secure it with one screw. Additional battery pack (6 Cell, 9 Cell and 12 Cell) You can increase the portability of the computer with one of the following additional battery packs: ■...

  • Page 134: Usb Fdd Kit

    Optional Devices USB FDD Kit The 3 1/2" external FDD drive module can be connected to the USB port. For details on connecting the 3 1/2" external diskette drive module, refer to Chapter 4, Operating Basics. External monitor An external analog monitor can be connected to the external monitor port on the computer, Port Replicator.

  • Page 135: I.link (Ieee1394)

    There is a possibility that the original data will be damaged. There is a particular risk that some frames will be deleted in the case of digital video transfer. TOSHIBA assumes no liability for such loss of data. 2. Do not transfer data in areas where static electricity is easily generated or in areas subjected to electronic noise.
  • Page 136 Optional Devices 6. Make sure data transfer has ended or turn off the computer, before you: a. Connect/disconnect an i.LINK device to/from the computer. b. Connect/disconnect an i.LINK device to/from another i.LINK device that is connected to the computer. Connecting 1.

  • Page 137: Security Lock

    Optional Devices Security lock A security lock enables you to anchor your computer to a desk or other heavy object to help prevent unauthorized removal of the computer. Attach one end of a cable to the desk and the other end to the security lock slot on the left side of the computer.

  • Page 138: Troubleshooting

    Chapter 9 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring.

  • Page 139: Analyzing The Problem

    Troubleshooting ■ Make sure all options are set properly in the setup program. ■ Check all cables. Are they correctly and firmly attached? Loose cables can cause signal errors. ■ Inspect all connecting cables for loose wires and all connectors for loose pins.

  • Page 140: Hardware And System Checklist

    Troubleshooting Software The problems may be caused by your software or diskette. If you cannot load a software package, the media (usually a diskette) may be damaged or the program might be corrupted. Try loading another copy of the software. If an error message appears while you are using a software package, check the software documentation.

  • Page 141: Self Test

    When the computer starts up, the self-test will be run automatically, and the following will be displayed: In Touch with Tomorrow TOSHIBA This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system.
  • Page 142 Troubleshooting AC power If you have trouble turning on the computer with the AC adaptor connected, check the DC IN indicator. Refer to Chapter 6, Power and Power-Up Modes for more information. Problem Procedure AC adaptor doesn’t Check the connections. Make sure the cord is power the computer firmly connected to the computer and a power (DC IN indicator does...
  • Page 143 Troubleshooting Problem Procedure Check the Battery indicator. If it does not glow, let the computer charge the battery for at least 20 minutes. If the Battery indicator glows after 20 minutes, let the battery continue to charge at least another 20 minutes before turning on the computer.

  • Page 144: Lcd Panel

    Troubleshooting LCD panel Apparent LCD problems may be related to the computer’s setup. Refer to Chapter 7, HW Setup and Passwords, for more information. Problem Procedure No display Press hotkeys Fn + F5 to change the display priority, to make sure it is not set for an external monitor.
  • Page 145 Troubleshooting DVD-ROM drive For more information, refer to Chapter 4, Operating Basics. Problem Procedure ’ You cannot access a Make sure the drive s drawer is securely closed. CD/DVD in the drive Press gently until it clicks into place. Open the drawer and make sure the CD/DVD is properly seated.

  • Page 146: Cd-Rw/Dvd-Rom Drive

    Troubleshooting CD-RW/DVD-ROM drive For more information, refer to Chapter 4, Operating Basics. Problem Procedure You cannot access a ’ Make sure the drive s drawer is securely closed. CD/DVD in the drive Press gently until it clicks into place. Open the drawer and make sure the CD/DVD is properly seated.
  • Page 147 Tour. Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording.

  • Page 148: Diskette Drive

    Troubleshooting Diskette drive For more information, refer to Chapter 4, Operating Basics. Problem Procedure Drive does not operate There may be a faulty cable connection. Check the connection to the computer and to the drive. Some programs run The software or hardware configuration may be correctly but others do causing a problem.
  • Page 149 Troubleshooting Touch Pad/Dual Mode Pad Problem Procedure On-screen pointer does The system might be busy. If the pointer is not respond to Pad shaped as an hourglass, waitfor it to resum its operation normal shape and try again to move it. Double-tapping does Try changing the double-click speed setting in not work...
  • Page 150 Troubleshooting USB mouse ® This section applies only with Windows XP operating systems. Problem Procedure On-screen pointer does The system might be busy. If the pointer is not respond to mouse shaped as an hourglass, wait for it to resume its operation normal shape and try again to move it.
  • Page 151 Troubleshooting SD/MS/MS Pro/MMC/xD card Refer also to Chapter 4, Operating Basics. Problem Procedure Memory card error Reseat the memory card to make sure it is firmly occurs connected. ’ Check the card s documentation. You cannot write to the Make sure the card is not write protected. memory card You cannot read a file Make sure the target file is on the memory card...

  • Page 152: Sound System

    Troubleshooting Sound system Problem Procedure No sound is heard Adjust the volume control dial. Check the software volume settings. Make sure the headphone connection is secure. Check Windows Device Manager. Make sure the sound function is enabled and that settings for I/O address, Interrupt level and DMA are correct for your software and do not conflict with other hardware devices that you may have connected...
  • Page 153 Troubleshooting Problem Procedure If you are using an operating system that does not support USB, you can still use a USB mouse and/or USB keyboard. If these devices do not work, make sure the USB KB/Mouse Legacy Emulation item in HW Setup is set to Enabled. If problems persist, contact your dealer.
  • Page 154 Troubleshooting Standby/Hibernation Problem Procedure The system will not Is Windows Media™ Player open? The system enter Standby/ might not enter Standby/Hibernation, if Windows Hibernation Media Player is either playing a selection or finished playing a selection. Close Windows Media Player before you select Standby/ Hibernation.

  • Page 155: Bluetooth

    Troubleshooting Bluetooth For more information on wireless communication, refer to Chapter 4, Operating Basics. Problem Procedure Cannot access Make sure the computer’s wireless Bluetooth device communication switch is set to on. Make sure the Bluetooth Manager is running and the power to the Bluetooth device is turned on. Make sure no optional Bluetooth PC card is installed in the computer.

  • Page 156: Toshiba Support

    Troubleshooting TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system, it is important to investigate other sources of assistance first.

  • Page 157: Specifications

    Appendix A Specifications This appendix summarizes the computer’s technical specifications. Physical Dimensions Size With TFT display 360 (w) × 267 (d) × 29.8 (front) / 36.8 (rear) millimeters Weight < 3 kilograms, configured with: 15.4" panel, DVD Combo drive, (typical*) 6-cell battery, and modem.
  • Page 158 Specifications Built-in Modem Network control unit (NCU) Type of NCU Type of line Telephone line (analog only) Type of dialing Pulse Tone Control command AT commands EIA-578 commands Monitor function Computer’s speaker Communication specifications Communication System Data: Full duplex Fax: Half duplex Communication protocol Data...

  • Page 159: Display Controller And Modes

    Appendix B Display Controller and Modes Display controller The display controller interprets software commands into hardware commands that turn particular pels on or off. The controller is an advanced Video Graphics Array (VGA) that provides Super VGA (SVGA) and Extended Graphics Array (XGA) support for the internal LCD and external monitors.

  • Page 160: Video Modes

    Display Controller and Modes Video Modes The computer supports video modes defined in the table below. If your application offers a selection of mode numbers that do not match the numbers on the table, select a mode based on, resolution, number of colors and refresh rates.

  • Page 161: Wireless Lan

    Appendix C Wireless LAN This appendix is intended to help you get your Wireless LAN network up and running, with a minimum of parameters. Card specifications ■ From Factor Mini PCI TypeIII ■ Compatibility IEEE 802.11 Standard for Wireless LANs ■...

  • Page 162: Radio Characteristics

    Wireless LAN Radio characteristics Radio characteristics of Wireless LAN cards may vary according to: ■ Country/region where the product was purchased ■ Type of product Wireless communication is often subject to local radio regulations. Although Wireless LAN wireless networking products have been designed for operation in the license-free 2.4 GHz and 5 GHz band, local radio regulations may impose a number of limitations to the use of wireless communication equipment.

  • Page 163: Supported Frequency Sub-Bands

    Subject to the radio regulations that apply in your country/region, your Wireless LAN card may support a different set of 5 GHz/2.4 GHz channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office for information about the radio regulations that apply in your country/region.
  • Page 164 Wireless LAN Wireless IEEE 802.11 Channels Sets (Revision A) Frequency Range 5150-5850 MHz Note Channel ID 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5745 US only 5765 US only 5785 US only 5805...
  • Page 165 Wireless LAN Wireless Channels Sets (Turbo Mode) Frequency Range 5150-5850 MHz Note Channel ID 5210 US only 5250 US only 5290 US only 5760 US only 5800 US only Factory-set default channels Refer to the sheet Approved Countries/Regions for use for the countries/regions that in which these channels can be used.

  • Page 166: Ac Power Cord And Connectors

    Appendix D AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Length: Minimum 2 meters...
  • Page 167 AC Power Cord and Connectors For the United States and Canada, two pin plug configuration must be a 2-15P (250V) or 1-15P (125V) and three pin plug configuration must be 6-15P (250V) or 5-15P (125V) as designated in the U.S. National Electrical code handbook and the Canadian Electrical Code Part II.

  • Page 168: If Your Computer Is Stolen

    What is your address, phone, and fax number? To register the theft on paper, please follow these procedures: ■ Fill in the TOSHIBA Theft Registration form (or a copy of it) below. ■ Attach a copy of your receipt showing where your computer was purchased.

  • Page 169: Toshiba Theft Registration

    In the Computer Systems page, open the Support & Downloads menu and choose the Stolen Units Database option. Your entries are used to track your computer at our service points. TOSHIBA Theft Registration Send to: TOSHIBA Europe GmbH Technical Service and Support Leibnizstr.
  • Page 170 Glossary The terms in this glossary cover the topics discussed in this manual. Alternate naming is included for reference. Abbreviations AC: alternating current AGP: accelerated graphics port ANSI: American National Standards Institute APM: advanced power manager ASCII: American Standard Code for Information Interchange BIOS: basic input output system CMOS: complementary metal-oxide semiconductor CPU: central processing unit...
  • Page 171 Glossary IRQ: interrupt request KB: kilobyte LCD: liquid crystal display LED: light emitting diode LSI: large scale integration MDA: monochrome display adapter MPEG: moving picture coding experts group MS-DOS: Microsoft Disk Operating System OCR: optical character recognition (reader) PCB: printed circuit board PCI: peripheral component interconnect PCMCIA: Personal Computer Memory Card International Association RAM: random access memory...
  • Page 172 Glossary adapter: A device that provides an interface between two dissimilar electronic devices. For example, the AC adapter modifies the power from a wall outlet for use by the computer. This term also refers to the add-in circuit cards that control external devices, such as video monitors and magnetic tape devices.
  • Page 173 Glossary BIOS: Basic Input Output System. The firmware that controls data flow within the computer. See also firmware. bit: Derived from ìbinary digit,î the basic unit of information used by the computer. It is either zero or one. Eight bits is one byte. See also byte.
  • Page 174 Glossary CGA: Color/graphics adapter. A video display protocol defined by the IBM Color/Graphics Monitor Adapter and its associated circuitry. This protocol supports two-color 640 × 200 and four-color 320 × 200 graphics, and 16-color 640 × 200 and 320 × 200 text modes. character: Any letter, number, punctuation mark, or symbol used by the computer.
  • Page 175 Glossary CRT: Cathode Ray Tube. A vacuum tube in which beams projected on a fluorescent screen-producing luminous spots. An example is the television set. cursor: A small, blinking rectangle or line that indicates the current position on the display screen. data bits: A data communications parameter controlling the number of bits (binary digits) used to make up a byte.
  • Page 176 (FDD): See diskette drive. floppy disk: See diskette. Fn-esse: A TOSHIBA utility that lets you assign functions to hotkeys. folder: An icon in Windows used to store documents or other folders. format: The process of readying a blank disk for its first use. Formatting establishes the structure of the disk that the operating system expects before it writes files or programs onto the disk.
  • Page 177 Fn, can be used to set system parameters, such as speaker volume. HW Setup: A TOSHIBA utility that lets you set the parameters for various hardware components. I/O devices: Equipment used to communicate with the computer and transfer data to and from it.
  • Page 178 Glossary input: The data or instructions you provide to a computer, communication device or other peripheral device from the keyboard or external or internal storage devices. The data sent (or output) by the sending computer is input for the receiving computer. instruction: Statements or commands that specify how to perform a particular task.
  • Page 179 Glossary main board: See motherboard. MDA: Monochrome Display Adapter. A video display protocol defined by the IBM Monochrome Display Adapter and its associated circuitry for direct drive TTL displays that supports a monochrome 720 × 350 text mode. megabyte (MB): A unit of data storage equal to 1024 kilobytes. See also kilobyte.
  • Page 180 Glossary OCR wand: A device that reads, using an optical device, hand written or machine printed symbols into a computer. See also OCR. OCR: Optical Character Recognition (reader). A technique or device that uses laser or visible light to identify characters and input them into a storage device.
  • Page 181 A Class A device is sufficient for office use. Class B provides a more stringent classification for home equipment use. TOSHIBA portable computers comply with Class B computing device regulations. Random Access Memory (RAM): High speed memory within the computer circuitry that can be read or written to.
  • Page 182 Glossary serial interface: Refers to a type of information exchange that transmits information sequentially, one bit at a time. Contrast: Parallel interface. serial port: A communications port to which you can connect devices, such as a modem, mouse, or serial printer. serial: The handling of data bits one after the other.
  • Page 183 Glossary VGA: Video graphics array is an industry standard video adapter that lets you run any popular software. volatile memory: Random access memory (RAM) that stores information as long as the computer is connected to a power source. Warm dock/undock: Connecting or disconnecting a device to or from the computer while the computer is suspended.
  • Page 184 Index Disk indicator, 2-9 Diskette drive, 9-11 AC adaptor, 1-7, 2-5 Display, 1-6, 2-7 DC IN 15V port, 2-5 automatic power off, 1-10 additional, 1-14, 8-9 opening, 3-6 connecting, 3-5 See also Video modes and Monitor Accessing, 7-1 external Analyzing the problem, 9-2 Display Brightness, 5-4 Arrow mode, 5-7 Display selection, 5-4...
  • Page 185 Index Fingerprint sensor Infrared port, See also Ports location, 4-2 problems, 9-11 using, 4-3 Instant security, 5-3 Fn + Alt, 5-3 Interfaces, See Ports, 2-12 Fn + Ctrl, 5-3 Fn + Enter, 5-3 Keyboard, 1-7, 5-1, 7-5, 9-6 Fn + Esc, 5-3 Keypad overlay, 1-10, 5-7 Fn + F1, 5-3 Fn + F10, 5-2...
  • Page 186 CD-RW/DVD-ROM drive, 9-9 (overlay on), 5-8 DVD-ROM drive, 9-8 Temporarily using overlay (overlay off), Processor, 1-3 TOSHIBA Power Saver, 1-12 TOSHIBA support, 9-19 Real time clock, 6-4 TOSHIBA Theft Registration, E-2 Real time clock battery, See Battery Turning on, 5-7 TV, 8-10 User’s Manual...
  • Page 187 Index TV output signal, 9-15 types, 6-3 Typewriter keys, 5-1 Utilities list, 1-12 USB, 1-7, 7-6, 9-15 location, 2-4, 2-5 user, 7-2 using, 4-32 Video modes, Appendix B Video RAM, 1-3 Video-out jack, 1-7, 2-3 Volume control, See Sound system Windows special keys, 5-6 Wireless LAN, 1-9, 9-17 using, 4-32...

This manual is also suitable for:

A100 va3 - satellite - pentium dual core 1.6 ghzA100

Table of Contents