HP Model 705 - Workstation User Manual page 16

Introduction
Preparing to Install the CD-ROM Drive
The following information is provided to prepare the CD-ROM for installation.
Tools Required
The following tools are needed to install the CD-ROM drive:
#2 Phillips screwdriver
Small needlenose pliers
Verifying Kit Contents
Verify that the kit contains one of each of the following:
CD-ROM drive (drive P/N A4xxx–60001)
Set of 4 screws (M4x6)
Power adapter cable
SCSI I/O cable
Static strap
HP 12x Speed CD-ROM Disk Drive User's Guide (A1658–90703)
NOTICE: If any contents of your kit are missing, contact your sales
representative.
Minimum Requirements
Minimum requirement for the HP-UX operating system is level 9.03 for the HP 12x
Speed CD-ROM drive.
NOTICE: ****You must use software patch PHSS_6620 under HP-UX
9.03, 9.05 and 9.07 and software patch PHSS_6607 under HP-
UX 10.01 to run SupportWave successfully.***???
1–6