Table of Contents
Advertisement
3.2
Telephone Features
Conference, Unattended
When you are in a conference with two outside parties, you can leave the conference call
allowing the other two parties to continue their conversation.
To establish an Unattended Conference
PT
During a conversation with two outside parties
Press CONF to leave the conference.
• An outside-to-outside (CO-to-CO) line call between the other two parties is established.
To return to the conference
PT
Press the CO flashing green moderately.
Conditions
• System Programming is required to execute this feature.
PT
• When an Unattended Conference is established, an alarm tone is sent to both outside
parties fifteen seconds before the assigned time limit (default: 10 minutes). "Hold
Recall" is activated at the extension that leaves the conference fifty seconds before the
time-out. The call is disconnected when the time-out expires unless the extension
returns to the conference.
PT
• For example, if you are on-hook and hear "Hold Recall" during the Unattended
Conference mode, the display will show "CO 2 & CO 3" for fifty seconds before the
time-out.
Programming References
• System Programming — Installation Manual
[205] Outside-to-Outside (CO-to-CO) Line Duration Time Limit
[606] Call Transfer to an Outside (CO) Line
Feature References
Conference
Hold Alarm/Hold Recall (
CONF
CO
See the Installation Manual.)
Telephone Features
C
3-53
Advertisement
Table of Contents
