Setup - Dell W3706MC Owner's Manual

FILE LOCATION: E:\Dell\W3706MC_DAO_OM\MC_DAO_proof (050622)\W3706MC_e40.fm

Setup

Setup allows you to adjust the appearance of the TV Menu, preset viewable cable channels, change
the language of the TV Menu (see "Selecting Your TV Menu Language" on page 28), and to
restore factory settings.
can preset the viewable channels. Select Channel Search to search the viewable channels. While
searching the channels, press the Menu or OK button on the remote control to stop the searching.
Select Channel Edit to edit the channels. If the signal is weak or distorted, select Fine Tuning to
fine-tune the channel manually.
If you are using the NTSC connector and the HDTV connector, you need to preset the viewable
channels for both the Digital TV and the TV input source.
Time Settings allow you to set the time zone and daylight saving settings.
NOTE:
The actual time is set through use of the ATSC tuner with a digital antenna. Without this antenna,
the time will not be available.
Timer Settings allow you to set the time when the TV switches off automatically.
Select Closed Caption to turn on and off closed captioning and set several other CC options.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 2 / 2 7 / 0 5 – F O R P R O O F O N LY
34
Using the TV Menu
In the TV Menu Settings menu, use TV Menu
Hold Time to increase or decrease the amount of
time the TV Menu appears.The maximum
amount of time is 60 seconds.
You can select TV Button lock to lock the
buttons on the bottom panel. When this option
is enabled, only the power button functions.
Hold the volume up and the channel up buttons
together for 10 seconds to unlock the buttons.
Channel Setup allows you adjust the settings for
individual channels and preset the viewable
channels. Select Antenna/Cable to select the
antenna or cable connected to your TV.
If you are using the TV (NTSC connector) or the
Digital TV (HDTV connector) input source, you