Advertisement
PS2-WLC Controller
The
comes when on you are setting the TURBO function; the
RX-LED
flashes when performing the TURBO function.
Button programming function:
12.
You can program and save the button sequence using the PROGRAM function.
Setting the PROGRAM functions: Press the
light will come on. Now press the button which you want to programme with a combined
function. Then press the desired button sequence (a maximum of 15 buttons) finish by
pressing the
.
P
button
ROGRAM
The
light will go out.
RX-LED
Clearing the
PROGRAM functions:
light will come on. Press the button which you previously programmed and want
RX-LED
to clear. Press the
button once again. The
P
ROGRAM
PROGRAM function has been cleared.
The following buttons can be programmed with combined functions:
following buttons can be used for programming:
,
,
,
and
. When you switch off the unit the controller retains the last
L2
L3
R1
R2
R3
PROGRAM function setting. The
RX-LED
PROGRAM function; the
flashes when you are using the PROGRAM function.
RX-LED
Note:
Not every game supports button sequence programming.
Vibration mode
13.
The unit vibrates once briefly to confirm when you press the
is to indicate that all vibrations (strong and weak) have been deactivated. Press the same
button again to reactivate the vibration mode. This is confirmed by two short vibrations.
Safety advice
14.
Do not attempt to dismantle, modify or repair the unit yourself.
Do not use this unit together with other electronic equipment of the same operating
frequency to avoid damaging both units.
Please ensure no fluids or small pieces of metal can get inside the unit. Avoid knocks to
the unit and do not place heavy objects on the device. Do not place containers of liquid like
vases or drinking glasses on or near the unit and never immerse the unit in fluid.
Do not use or store the unit in high-temperature areas, or in steamy, smoky or dusty areas.
RX-LED
button
. The
P
RX-LED
ROGRAM
Press the
button
once. The
P
ROGRAM
goes out, i.e. the
RX-LED
,
,
,
L2
L3
R2
R3
,
, X,
, all 4 directional buttons,
remains on when you are setting the
and
buttons. This
R3
S
ELECT
Never mix battery types and never mix old and new batteries. Replace the batteries as
soon as they become too weak or where the unit has not been used for some time.
There is a risk of explosion if the batteries are not replaced in the proper manner. Please
ensure the batteries are always inserted according to the correct polarity. Replace the
batteries with the same brand or similar batteries. Risk of explosion when batteries are
replaced incorrectly.
Do not attempt to recharge a non-rechargeable battery. There is a risk of explosion.
Batteries / rechargeable batteries can be fatal if swallowed. Please store batteries out of
reach of small children. Seek medical help immediately if a battery has been swallowed.
Do not expose the batteries to heat or flames. Never short-circuit batteries; never try to
force open batteries; never attempt to recharge non-rechargeable batteries. Batteries may
otherwise explode and cause serious injury.
Disposing of batteries
15.
Please note that you, as the end user, are required to return used batteries to a public
or privately run battery disposal unit.
Disposing of the unit
16.
Please note that this device is subject to European Directive 2002/96/EC on the
. The
reduction of electronic waste.
,
L1
You are not permitted to dispose of this unit together with household
waste.
Information on safe disposal of all devices is available from your local
council, waste disposal unit and the shop in which you purchased this
product.
You may deposit this product free of charge in your community collection
facility.
Correct disposal of used goods protects the environment as well as your
health.
Guarantee
17.
This product comes with a three-year guarantee starting on the day of purchase. If this product
is faulty send it, together with the receipt and a stamped-addressed envelope, to:
JNC Datum Tech GmbH, Support Center,
Maltschachstrasse 32, D - 72144 Dusslingen, Germany.
Manufacturer:
JNC Datum Tech GmbH
Benzstraße 33
D - 71083 Herrenberg
Germany
- 3 -
More information can also be found at:
www.mysilvercrest.de
Advertisement
