Display; Duration Of The Programme; Delay Start; Programmable Functions - Miele W 460 WPS Operating Instructions Manual

The following functions are shown in the

display:

– duration (Time left display)

– delay start

– programmable functions

If a programme without delay start has
been selected, the maximum duration
(wash time) of the programme in hours
and minutes will appear in the display
after the start of the programme.
In the:
– COTTONS
– MINIMUM IRON
– Mixed wash
programmes, the washing machine
measures the amount of water being
taken up by the laundry and uses this
to calculate the load during the first 10
minutes. If the machine recognises a
smaller load it will shorten the
programme time by up to 60 minutes.
The shortened time is achieved by, for
example, reducing the number of
rinses.
Soak
If a soak time has been selected, this is
added to the programme wash time in
the display to give a total running time.
12
The delay start time selected will
appear in the display.
After the machine has started, the
delay start time counts down. If the
delay start is over 10 hours, it will count
down by the hour. If it is less than 9
hours and 59 minutes it will count down
minute by minute.
Once the delay start period is
completed the programme begins and
the actual programme duration shows
in the display.
The programmable functions can be
used to tailor washing programmes to
suit your individual requirements. The
function selected is displayed in
programming mode.