Log Settings; Push To Talk; User Settings; Connection Settings - Nokia E50 User Manual

C a l l s a n d v o i c e a p p l i c a t i o n s
To sort the events by type or direction, scroll right, and select
the type or direction, and press the joystick.
To specify when communication events are cleared, select
To clear missed and received calls and dialed numbers, select
To reply to a caller with a message, select
and multimedia messages.
To add the caller or the sender of a message to Contacts, select the caller or sender of a message, and select
calls Options Add to Contacts.
> >
To view the amount of data sent or received using GPRS, select
To clear the GPRS counters, select

Log settings

To set the time for keeping all communication events in the Log, select
list, and OK.
To see the call duration during the call, select

Push to talk

Select Menu Connect. > PTT.
>
Push to talk (PTT) (network service) provides direct voice communication connected with the push of a key. With PTT, you can
use your device as you would use a walkie-talkie.
Push to talk
You can use push to talk to have a conversation with one person or with a group of people, or to join a channel. A channel is
like a chat room: you can call the channel to see if anyone is online. The channel call does not alert the other participants; the
participants just join the channel and start speaking with each other.
In push to talk communication, one person talks while the other participants listen through the built-in loudspeaker. Participants
take turns responding to each other. Because only one participant can talk at a time, the maximum duration of a speech turn
is limited. For details of the speech turn duration for your network, contact your network operator or service provider.
Remember to hold the device in front of you during a push to talk call so you can see the display. Speak towards the microphone,
and do not cover the loudspeaker with your hands.
Phone calls always take priority over push to talk.
Before you can use push to talk, you must define the push to talk access point and push to talk settings. You may receive the
settings in a special text message from the service provider that offers the push to talk service.

User settings

Select Options Settings
>
Define the following:
Incoming PTT calls — Select
•
talk calls to be answered automatically. Select
PTT call alert tone — Select
•
settings. If your profile is silent, you are not available to others using push to talk, except for callback requests.
Callback request tone — Define the ringing tone for callback requests.
•
Application start-up — Select if you want to log in to the push to talk service when you switch on your device.
•
Default nickname — Enter your default nickname (20 characters maximum) that is displayed to other users.
•
Show my PTT address
•
show the address only to one-to-one callers or channel participants, or hide the address from all callers.
Show my login status
•

Connection settings

Select Options Settings
>
Define the following:
Domain — Enter the domain name obtained from your service provider.
•
Access point name — Select the push to talk access point.
•
Server address — Enter the IP address or domain name of the push to talk server obtained from your service provider.
•
User name — Enter your user name obtained from your service provider.
•
Password — Enter a password, if required, to log into the push to talk service. The password is provided by the service provider.
•
Copyright © 2006 Nokia. All Rights Reserved.
Recent calls
Options Clear
>
Options
User settings.
>
Notify if you want to see a notification of incoming calls. Select
Not allowed
Set by profile if you want the incoming call alert setting for push to talk to follow your profile
— Define if you want callers to see your push to talk address. You can let all callers see the address,
— Define whether your login to the push to talk server is shown or hidden from other users.
Connection settings.
>
Options > Filter. Scroll to a filter type, and press the joystick. Select
Options Settings
>
Recent calls
>
Missed calls Options
> >
Packet data.
counters. Enter your lock code, and select OK.
Options
Settings Show call duration
> >
if you want push to talk calls to be rejected automatically.
23
Log duration, an option, and OK.
>
Options Clear recent calls.
>
Create message. You can send text messages
>
Settings Log duration, an option from the
> >
> Yes.
Auto-accept
Recent calls Missed
>
if you want push to