Description Of The Appliance; View Of The Appliance; Prior To Initial Start-Up - AEG SANTO 3350-6 KA Operating Instructions Manual

Description of the Appliance

View of the appliance

Temperature regulator and ON/OFF-switch

Butter/cheese compartments with flaps

Door storage compartment

Bottle shelf

Salad bin

Storage shelves

Rating plate
Prior to Initial Start–Up
1
Before connecting the appliance to the mains and putting it into
operation for the first time, leave the appliance to stand for 30 minutes
if was transported upright. After transport on its side, the appliance
must be left to stand for 2 hours before putting it into operation. This is
necessary to allow the refrigerant to flow back into the compressor.
Otherwise the compressor may be damaged.
0
1. Please clean the appliance interior and all accessories prior to initial
start-up (see section: "Maintenance and Cleaning").
818 17 80-00/1
15