Brother MFC-J280W User Manual page 36

Configuring your machine for a wireless network
For MFC-J280W/J625DW/J825DW/J835DW/J5910DW and DCP-J525W/J725DW/J925DW
a
Before configuring your machine we recommend you write down your wireless network settings. You will
need this information before you continue with the configuration.
Check and record the current wireless network settings.
Note
The wireless network settings of the computer you are connecting with must be set to Ad-hoc mode with
a SSID already configured. For instructions on how to configure your computer to Ad-hoc mode please
see the information included with your computer or contact your network administrator.
SSID (Network Name):
Communication Mode
Ad-hoc
For example:
SSID (Network Name):
HELLO
Communication Mode
Ad-hoc
b
Press Menu.
c
Press Network.
d
(MFC-J825DW/J835DW/J5910DW and DCP-J925DW only)
Press WLAN.
e
Press Setup Wizard.
f
When Enable WLAN? or Switch Network interface to wireless? is displayed, press Yes to
accept.
This will start the wireless setup wizard.
To cancel, press Stop/Exit.
g
The machine will search for your network and display a list of available SSIDs. Press a or b to display
<New SSID>, and press <New SSID>.
h
Enter the SSID name. (For information on how to enter text, see the Quick Setup Guide.)
Press OK.
i
Press Ad-hoc when instructed.
Encryption mode
WEP
NONE
Encryption mode
WEP
Network key
—
Network key
12345678
3
3
32