Changing The Password To The Security Folder - Brother SV-100B User Manual

Changing the Password to the Security Folder

The password can be changed even when a unit-specific file is saved to the Security
folder.
Change the password as follows.
1
Open the Security folder.
• Refer to "Opening/Closing the Security Folder" on page 28.
2
Right click the security folder (
• The password can also be changed from [Tools]
Menu.
The [Password change] dialog displays.
3
Enter the current four digit password as one-byte numeric characters.
3
4
Enter a four digit password in the "New Password" field.
• Configure the password using one-byte numeric characters: 0-9. Alphabet characters or
symbols cannot be used.
5
Enter the new password into the "Confirm new password." field.
6
Click [OK].
The [Processing password change] dialog displays.
• The unit-specific files in the Security folder are re-encrypted. The change password
process is complete when the re-encryption progress display is 100%.
• When there is a large quantity of user-specified files in the Security folder, this may take
some time.
29
) and click [Password setting/change].
[Password setting/change] in the