Turning The Machine On And Off; Turning On The Machine - Canon FAX-JX300 User Manual

Turning the Machine ON and OFF

Turn on the machine before starting printing.

Turning on the Machine

Before turning on the machine, confirm that the FINE Cartridge is set into place.
Note
If preparatory operations are not yet finished, follow the Easy Setup Instructions to complete them.
1
To turn on the machine, press [ON/OFF].
[ON/OFF] flashes green for a while, and then turns on.
Note
If an error message is displayed on the LCD, see "LCD Messages" on page 74.
The LCD will turn itself off if inactive for more than 5 minutes, press any button on the Operation
Panel except for [ON/OFF] to restore the display.
Turning off the Machine
1
To turn off the machine, press [ON/OFF] about a few seconds.
The machine is off after <SHUTTING DOWN....> is displayed on the LCD.
Important
Always press [ON/OFF] before disconnecting the power cord. This ensures the FINE Cartridge
is covered to prevent it from drying out.
If the machine is not used for an extended period of time, we recommend making copies or
performing FINE Cartridge cleaning about once every month to prevent degradation of the FINE
Cartridge.
The FINE Cartridge has many nozzles in order to produce high-definition prints. In the same
way that the tip of a felt-tip or marker pen will naturally dry out over time and become unusable
even with the cap in place, the nozzles might become clogged. Periodically printing or
performing FINE Cartridge cleaning can help to prevent this kind of clogging.
If you change to another telephone line, turn off the machine before unplugging the telephone
line cable.
Note
The power cannot be turned OFF with [ON/OFF] while the machine is operating.
Before Using Your Machine 7