What To Do If; Installation - Zanussi ZOB142 User Manual

Replacing the oven light bulb/cleaning the glass
cover
Warning! Be careful! There is the risk of electrical
shock!

What to do if...

Warning! Refer to "Safety information" chapter.
Problem
The oven does not heat up
The oven does not heat up
The oven lamp does not operate
Steam and condensation settle on the
food and in the oven cavity
If you cannot find a solution to the problem yourself,
contact your dealer or the service centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

Installation

Warning! Refer to "Safety information" chapter.
10
1. Turn the glass cover anti-clockwise to remove it.
2. Clean the glass cover.
3. Replace the oven light bulb with applicable 300°C
4. Install the glass cover.
Possible cause
The oven is not switched on
The fuse in the fuse box is released
The oven lamp is defective
You left the dish in the oven for too
long
The necessary data for the service centre is on the rating
plate. The rating plate is on the front frame of the oven
cavity.
heat-resistant oven light bulb. New oven light bulb
must have the same parameters as your previous one.
Switch on the oven (refer to chapter
"Daily use").
Control the fuse. If the fuse is re-
leased more than one time, refer to a
qualified electrician.
Replace the oven lamp
Do not leave the dishes in the oven
for longer than 15-20 minutes after
the cooking process ends
.........................................
.........................................
.........................................
Remedy